• 디지털콘텐츠학회 논문지
• /
• 제7권3호
• /
• pp.183-191
• /
• 2006

Currently, the preferred processing of a user-centered ROI(Region-of-Interest) or a specific region of image to transmission and decompression of a full image is needed in different applications, specifically mobile applications. Here, we have to study how different factors affect ROI coding methods. Therefore, an application can select an ROI coding method and several parameters suitable for the environments. The ROI coding methods used in the study are Maxshift and Implicit and the parameters are tile size, image size, code block size, ROI importance and the number of lowest resolution levels. This study shows the experimental results between the different parameters and the two ROI coding methods.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 SMICS 2004 International Symposium on Maritime and Communication Sciences
• /
• pp.20-23
• /
• 2004

In non-selective frequency environment, it is difficult to take the advantage of path diversity. In the literature, some methods have been proposed to solve the issue. This paper presents a new method to obtain the resolvable path in Indoor Multi-carrier Code Division Multiple Access (MC-CDMA) system by using downlink beam forming. With the aid of downlink beamforming, the most reliable path is found and chosen for the communication link. The new approach is evaluated in term of bit error rate (BER) and power consumption. The simulation results show that the new approach can get better BER performance. However, the cost of BER improvement is a small degradation in power reservation.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(2)
• /
• pp.513-518
• /
• 1996

This report presents a demonstration of application of realistic evaluation methodology to a posturated cold leg large break LOCA in a Westinghouse three-loop pressurized water reactor with 17$\times$17 fuel. The new method of this analysis can be divided into three distinct step: 1) Best Estimate Code Validation and Uncertainty Quantification 2) Realistic LOCA Calculation 3) Limiting Value LOCA Calculation and Uncertainty Combination RELAP5/MOD3/K ［1］, which was improved from RELAP5/MOD3.1, and CONTEMPT4/MOD5 code were used as a best estimate thermal-hydraulic model for realistic LOCA calculation. The code uncertainties which will be determined in step 1) were quantified already in previous study ［2］, and thus the step 2) and 3) for plant application were presented in this paper. The application uncertainty parameters are divided into two categories, i.e. plant system parameters and fuel statistical parameters. Single parameter sensitivity calculations were performed to select system parameters which would be set at their limiting value in Limiting Value Approach (LVA) calculation. Single run of LVA calculation generated 27 PCT data according to the various combinations of fuel parameters and these data provided input to response surface generation. The probability distribution function was generated from Monte Carlo sampling of a response surface and the upper 95$^{th}$ percentile PCT was determined. Break spectrum analysis was also made to determine the critical break size. The results show that sufficient LOCA margin can be obtained for the demonstration NPP.

• 한국통신학회논문지
• /
• 제28권5A호
• /
• pp.267-275
• /
• 2003

UMTS는 1) 슬롯 동기 획득, 2)코드그룹 및 프레임 동기 획득, 3) 코드 식별 과정으로 구성된 초기 셀 탐색방법을 사용한다. 단말 모뎀의 초기 셀 포착 성능은 탐색기의 관찰 구간과 임계값 등의 탐색 파라미터에 의하여 크게 영향을 받는다. 본 논문의 목적은 최소 평균 포착 시간을 구하기 위한 단계별 관찰 구간과 임계값을 구하는데 있다. 본 논문에서는 3단계 탐색과정을 상태 다이어그램을 통하여 모델링하고 이로부터 단계별 평균 검출 시간과 전체 평균 포착 시간을 유도한다. 또한 초기 발진기 오차를 고려한 셀 탐색 알고리즘을 제시하고, 모의 실험결과와 유도한 단계별 평균 검출 시간을 이용하여 적절한 각 단계별 검출 시간을 설정한다. 각 단계의 최적 임계값은 유도된 전체 평균 포착 시간으로부터 결정될 수 있으며, 결정된 파라미터를 이용하여 다중경로 페이딩 채널에서 500ms이내의 성능을 얻을 수 있었다.

• International Journal of Computer Science & Network Security
• /
• 제21권12spc호
• /
• pp.375-382
• /
• 2021

The paper introduces a model for evaluating and prioritizing mobile quality attributes and refactoring techniques through the examination of their effectiveness during the mobile application development process. The astonishing evolution of software and hardware has increased the demand for techniques and best practices to overcome the many challenges related to mobile devices, such as those concerning device storage, network bandwidth, and energy consumption. A number of studies have investigated the influence of refactoring, leading to the enhancement of mobile applications and the overcoming of code issues as well as hardware issues. Furthermore, rapid and continuous mobile developments make it necessary for teams to apply effective techniques to produce reliable mobile applications and reduce time to market. Thus, we investigated the influence of various refactoring techniques on mobile applications to understand their effectiveness in terms of quality attributes. First, we extracted the most important mobile refactoring techniques and a set of quality attributes from the literature. Then, mobile application developers from nine mobile application teams were recruited to evaluate and prioritize these quality attributes and refactoring techniques for their projects. A prioritization-based model is examined that integrates the lightweight multi-criteria decision making method, called the best-worst method, with the process of refactoring within mobile applications. The results prove the applicability and suitability of adopting the model for the mobile development process in order to expedite application production while using well-defined procedures to select the best refactoring techniques. Finally, a variety of quality attributes are shown to be influenced by the adoption of various refactoring techniques.

• 한국정보통신학회논문지
• /
• 제19권2호
• /
• pp.301-307
• /
• 2015

본 논문에서는 공간적 상관관계를 갖는 MIMO(multiple-input multiple-output) 채널을 가정하여 도청자가 존재하는 환경인 와이어탭(wiretap) 채널을 고려한다. 이 때, 각 노드에서 안테나의 교차 편파를 가정하여 1-비트 피드백을 이용하는 직교 시공간 블록 코드(OSTBC: orthogonal space-time block code)의 물리계층 보안 성능을 분석한다. 본 논문에서는 1-비트 피드백을 이용하여 OSTBC(O-OSTBC: one-bit feedback-based OSTBC) 전송을 위한 송신안테나 그룹을 선택하는 방법을 제시하고, 다양한 송신안테나 그룹핑 방법들에 대하여 보안 불통 확률(secrecy outage probability)을 비교한다. 특히, 높은 공간적 상관관계를 갖는 MIMO 채널에서 O-OSTBC와 기존의 OSTBC와의 보안 불통 확률의 성능을 비교하여 효율적인 송신안테나 그룹핑 방법을 제안한다.

• 대한전자공학회논문지SD
• /
• 제44권6호
• /
• pp.34-41
• /
• 2007

본 논문에서 제안한 FSM 기반의 프로그래머블 BIST(Built-In Self-Test)는 플래시 메모리를 테스트하기 위한 기조의 알고리즘들을 코드화 하여 그 중에서 선택된 알고리즘의 명령어 코드를 받아서 플래시 메모리 테스트를 수행한다. 또한 제안하는 구조는 각 알고리즘에 대한 테스트 절차를 간단하게 한다. 이외에도 플래시 메모리 BIST를 재구성하는데 걸리는 시가도 기조의 BIST와 비교해 볼 때 매우 적다. 우리가 제안한 BIST 구조는 자동적으로 Verilog 코드를 생성해주는 프로그래머블 플래시메모리 BIST 생성기이다. 만약 제안된 방법을 실험하게 되면, 제안된 방법은 이전의 방법들과 비교해서 크기도 더 작을 뿐만 아니라 융통성 면에서도 좋은 성과를 얻었다.

• 한국멀티미디어학회논문지
• /
• 제10권11호
• /
• pp.1427-1438
• /
• 2007

비디오 워터마킹은 일반적으로 네 가지의 타입으로 분류되어진다. 첫 번째로는 원 비디오 신호에 워터마크를 삽입한 후 부호화하는 것으로 대부분의 비디오 워터마킹 기법이 이에 속한다. 두 번째로는 블록 DCT, 양자화 등의 부호화 과정에 워터마크를 삽입하는 것이고, 세 번째로는 부호화된 비트스트림에 워터마크를 삽입하는 것으로 이를 라벨링(labeling)이라고도 한다. 마지막으로 네 번째로는 움직임 벡터에 워터마크를 삽입하는 것으로, 이는 높은 복잡도가 요구되며 블록화 현상과 같은 화질 열화가 발생된다. 본 논문에서는 움직임 벡터 추정을 이용한 I 프레임 상에서 SPIHT 기반의 비디오 부호화에 워터마크를 삽입하는 방법을 제안한다. 이는 블록 DCT 기반의 부호화기에 발생되는 블록화 현상을 제거하고, 점진적 전송 특성을 가진다. 제안한 방법에서는 I 프레임 상에서 이전 P 또는 B 예측 프레임으로부터 움직임 벡터를 추정한 후에 이를 기반으로 워터마크 삽입 영역을 선택한다. 그리고 DWT를 수행하여 워터마크 삽입 영역 상에서 움직임 벡터의 방향과 동일한 부대역 상의 웨이브릿 계수를 HVS에 기반하여 워터마크를 삽입한다. 마지막으로 SPIHT 부호화기에 의하여 워터마크가 삽입된 비디오 비트스트림을 생성한다. 실험 결과로부터 제안한 방법이 객관적 및 주관적인 화질 측면에서 우수한 비가시성을 확인하였고, 다양한 압축률 및 MPEG 재부호화 등에 대하여 우수한 강인성을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.579-588
• /
• 2022

In order to meet the needs of domestic reactor severe accident analysis program, a MIDAC (Module Invessel Degraded severe accident Analysis Code) is developed and maintained by Xi'an Jiaotong University. As the accuracy of the calculation results of the analysis program is of great significance for the formulation of severe accident mitigation measures, the article select three experiments to evaluate the updated severe accident models of MIDAC. Among them, QUENCH-06 is the international standard No.45, QUENCH-16 is a test for the analysis of air oxidation, and FROMA is an out-of-pile fuel rod melting experiment recently carried out by Xi'an Jiaotong University. The heating and melting model with lumped parameter method and the steam oxidation model with Cathcart-Pawel and Volchek-Zvonarev correlations combination in MIDAC could better meet the needs of severe accident analysis. Although the influence of nitrogen still need to be further improved, the air oxidation model with NUREG still has the ability to provide guiding significance for engineering practice.

• Journal of Biosystems Engineering
• /
• 제42권4호
• /
• pp.251-257
• /
• 2017

Purpose: A chisel mounted on working implement, such as agricultural machinery used in irregular farming conditions, is subjected to highly variable fatigue loading during work. To ensure the safety of the chisel on a working implement for the duration of its service life, fatigue testing must be performed with the proper fatigue test load conditions. In this study, working loads for a chisel were developed by reconstructing loads from strain gage data collected during field tests and used to conduct fatigue tests on the chisel component. Methods: FE analysis with nCode software was utilized to select the proper quantity and locations of strain gages for load measurements. A fatigue test was performed to experimentally verify the fatigue strength of the chisel and to evaluate the validity of the load history developed with the load reconstruction technique. Results: A strain history for the chisel was obtained from data collected during field tests. The data was filtered for the 14-16 km/h speed range, connected, and merged. The chisel load history was developed using the load reconstruction technique. The resulting load history was expressed as a load spectrum using the rain-flow counting method. Conclusions: A fatigue test was conducted on a chisel under a constant load condition with an equivalent load amplitude and number of cycles, as calculated by Miner's Rule for linear damage accumulation. During the fatigue test, there were no cracks at any position. It is concluded that the fatigue test method proposed in this study can be utilized successfully as a durability evaluation method for the chisel.