• Tribology and Lubricants
• /
• v.39 no.3
• /
• pp.87-93
• /
• 2023

Nanofluids are dispersions of particles smaller than 100 nm (nanoparticles) in base fluids. They exhibit high thermal conductivity and are mainly applied in cooling applications. Nanolubricants use nanoparticles in base oils as lubricant additives, and have recently started gathering increased attention owing to their potential to improve the tribological and thermal performances of various machinery. Nanolubricants reduce friction and wear, mainly by the action of nanoparticles; however, only a few studies have considered the rheological properties of lubricants. In this study, we adopt a parallel slider bearing model that does not generate geometrical wedge effects, and conduct thermohydrodynamic (THD) analyses to evaluate the effect of higher thermal conductivity and viscosity, which are the main rheological properties of nanolubricants, on the lubrication performances. We use a commercial computational fluid dynamics code, FLUENT, to numerically analyze the continuity, Navier-Stokes, energy equations with temperature-viscosity-density relations, and thermal conductivity and viscosity models of the nanolubricant. The results show the temperature and pressure distributions, load-carrying capacity (LCC), and friction force for three film-temperature boundary conditions (FTBCs). The effects of the higher thermal conductivity and viscosity of the nanolubricant on the LCC and friction force differ significantly, according to the FTBC. The thermal conductivity increases with temperature, improving the cooling performance, reducing LCC, and slightly increasing the friction. The increase in viscosity increases both the LCC and friction. The analysis method in this study can be applied to develop nanolubricants that can improve the tribological and cooling performances of various equipment; however, additional research is required on this topic.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.4
• /
• pp.753-761
• /
• 2017

Recently, malicious code infiltration and leakage of confidential documents using external USB medium are frequently occurring in each field. We investigate the media to investigate incidents using external USB media, but there are many difficulties in that they can be lost or damaged. Ultimately, in order to investigate cases of external USB media, it is necessary to conduct a direct analysis of the external USB media as well as the system to which the media is connected. This paper describes an analysis of the artifacts of Windows systems to which external USB media is connected, and how to check the job history on the media. Therefore, it is expected that the system can be used to analyze the job history of the USB medium even if the external USB medium is not secured.

• Tribology and Lubricants
• /
• v.36 no.4
• /
• pp.193-198
• /
• 2020

Fluid film bearings are among the best devices used for overcoming friction and reducing wear. Surface texturing is a new surface treatment technique used for processing grooves and dimples on the lubricated surface, and it helps to minimize friction further and improve the wear resistance. In several studies, parallel surfaces, such as thrust bearings and mechanical face seals, have been investigated, but most sliding bearings have a convergent film shape. This paper presents the third part of a recent study and focuses on the effect of the groove shape on the lubrication performance of inclined slider bearings, following the two previous papers on the effects of the groove position and depth. We adopted the continuity and Navier - Stokes equations to conduct numerical analyses using FLUENT, which is a commercial computational fluid dynamics code. The groove shape adopted in the numerical analysis is rectangular and triangular, and its depth is varied. The results show that the streamlines, pressure distributions, and groove shape significantly influence the lubrication performance of the inclined slider bearing. For both shapes, the load-carrying capacity (LCC) is maximum near the groove depth, where vortices occur. In the shallow grooves, the LCC of the rectangular shape is higher, but in deeper grooves, that of the triangular shape is higher. The deeper the rectangular groove, the higher the decrease in the frictional force. The results of this study can be used as design data for various sliding bearings.

• Korean journal of communication and information
• /
• v.74
• /
• pp.38-71
• /
• 2015

Based on the Foucault's governmentality, this study has described the self-government strategy that healing discourse is implemented during 2011-2013. Healing discourse's priority is the existence value of individual and full concentration about self is needed more than anything. In this process, people who need to heal and comfort are limit to de-politicized individuals. Healing discourse emphasizes that the current enhancement in order to become reflection and growth of self. Demands of reflection and growth is substitute the critics of the era and society, but also act as a specific code of conduct to individuals. While emphasizes the reflection and personal growth, healing discourse has top priority of the current value. However, in this process, criticism of the era issues and social structural factors are fundamentally excluded. People accepted healing discourse actively, decided empowering self by reflection and remorse. On the other hand, there is a crack and specificity in the dominant reception discourse likewise some subjects criticized that there is no realistic consolation, exposed the antipathy to the older generation, denied the way of problematized objectification. But this is a partial denial about healing as concrete technology, not fundamental resistance about neoliberal orders.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.4
• /
• pp.41-46
• /
• 2016

Recently, many domestic and foreign corporates are concentrating in investment to wearable devices and users are provided with various service based on wearable devices 26% more than compared to last year. It is widely used in previous healthcare, smart work, smart home environment, and it is now introduced to get connection to fused service environment. However, as products of G company are commercialized, the security issue of personal information is causing dispute in society, and the danger of data management and security regarding telecommunication is increasing. Also, because the password system used in previous wireless environment is still in use, there are possible vulnerability considering the new and mutant security threat. This thesis conducted study about protocols that can exercise safe telecommunication in the basis of wearable devices. In the registration and certification process, the signature value is created based on the code value. The telecommunication method is designed to conduct safe telecommunication based on the signature value. As for the attack method occurring in the wearable device environment, the safety was analyzed and conducted performance evaluation of previous password system and proposal system, and verified about 14% of efficiency.

• Fashion & Textile Research Journal
• /
• v.24 no.2
• /
• pp.206-216
• /
• 2022

This study sought to examine the sustainability criteria found in the global sourcing practices of global fashion retailers. Sustainable supply chain management, with a particular focus on the sustainability criteria of global sourcing, was analyzed. This qualitative study was based on a focus group interview and corporate social responsibility (CSR) annual reports. Eight master categories, 18 middle categories, and 37 bottom categories were extracted. The key categories and their middle categories were as follows: (1) Social compliance (working conditions, employment, safety); (2) Environment concerns (environmental pollution management, eco-friendly production, supply chain environment); (3) Energy efficiency (energy saving program, store environment); (4) Consumer protection (restricted substances management, consumer product safety improvement); (5) Management system (code of conduct, triangle audit system); (6) Community social activities (local community service, voluntary activities, charitable activities); (7) External stakeholder engagement (media & non-governmental organization management, maintenance of relationship with local authority); (8) Brand protection (respect for companies' intellectual property). The findings of this study offer academically significant insights into the sustainability criteria that can be encountered by companies under diverse global sourcing scenarios, revealing that global sourcing by fashion retailers is not merely a means of reducing costs, but a way of generating new jobs and making a social contribution to developing countries. The study's findings also have practical significance, offering guidelines for general CSR activities in the global sourcing process.

• Journal of Navigation and Port Research
• /
• v.38 no.2
• /
• pp.141-146
• /
• 2014

NIR(New Inspection Regime, hereinafter NIR) relating to the PSC(Port State Contorl, hereinafter PSC) has implemented in Asia-Pacific region under Tokyo-MOU from last January 2014. The most noticable difference between NIR and existing TF(Target Factor, hereinafter TF) is to evaluate company performance and to conduct PSC with flexible inspection interval on the basis of Ship Risk Profile; High Risk Ship, Standard Risk Ship and Low Risk Ship. Particularly deficiencies related to ISM Code, more than 5 deficiencies and detention record have a serious effect on the evaluation of Ship Risk Profile. Therefore ship and company are requested to ensure proper implementation of Safety Management System for the changed PSC tendency. Also RO(Recognized Organization, hereinafter RO) and Administration respectively should take suitable actions different to previous measures, such as implementation of cooperation and support system between vessel and company, changing subject and object for avoiding Mannerism in SMS audit, strengthening supervision on RO by Administration and establishment of private-public Partnership network.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.3
• /
• pp.209-218
• /
• 2016

Recently, Wind-turbine electronic generator become popular. Wind-Turbine is free to cost for purchase and noise problem. For this reason, trend is shifting from Wind-turbine on land to offshore. Research and Development for offshore Wind-turbine has been conducted by various research institution. However, There is no solid design code for offshore Wind-turbine even in domestic as well as foreign. In this paper, conduct seismic analysis and compare results using design codes Korea Bridge Design Codes, Korea Harbor and Marina Design Codes, and DNV OS. Time-History analysis conducted for checking time dependent effect. The Added-Mass Method applied to consider water-structure effects and compared for w/ water and w/o water condition.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.1
• /
• pp.49-55
• /
• 2012

Asynchronous counters, where the counter value is changed not by a synchronizing clock but by outer inputs, are used in various modern digital systems such as spaceborne electronics. In this paper, we propose a scheme of fault tolerance for asynchronous counters with critical races caused by total ionizing dose (TID) in space. As a typical design flaw of asynchronous digital circuits, critical races cause an asynchronous circuit to show non-deterministic behavior, i.e., the next stable state of a state transition is not a fixed value but may be any value of a state set. Using the corrective control scheme for asynchronous sequential machines, this paper provides an existence condition and design procedure for a state feedback controller that can invalidate the effect of critical races. We implement the proposed control system in VHDL code and conduct experiments to demonstrate that the proposed control system can overcome critical races.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.25 no.4
• /
• pp.5-27
• /
• 2014

This study investigated professional values on which the practices and the perceptions of professions were based, then identified common professional values and different ones. The codes of ethics by professional organizations of libraries, archives, or museums in the U.S., Canada, the U.K. and Australia were selected for the analysis. Predicated on the literature review, common professional values were derived from the existing studies. While conducting the analysis, 13 values were identified and finalized. As a result, it was found that common professional values included access, privacy, stewardship, professional conduct and professional responsibilities to the society. Intellectual freedom in the library area, records as an evidence in the archive area, and research and interpretation in the museum area are those emphasized and unique in each area.