• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.6
• /
• pp.459-468
• /
• 2003

This paper proposes a novel low-cost and high-speed Reed-Solomon (RS) decoder based on a new degree computationless modified Euclid´s (DCME) algorithm. This architecture has quite low hardware complexity compared with conventional modified Euclid´s (ME) architectures, since it can remove completely the degree computation and comparison circuits. The architecture employing a systolic away requires only the latency of 2t clock cycles to solve the key equation without initial latency. In addition, the DCME architecture using 3t＋2 basic cells has regularity and scalability since it uses only one processing element. The RS decoder has been synthesized using the 0.25${\mu}{\textrm}{m}$. Faraday CMOS standard cell library and operates at 200MHz and its data rate suppots up to 1.6Gbps. For tile (255, 239, 8) RS code, the gate counts of the DCME architecture and the whole RS decoder excluding FIFO memory are only 21,760 and 42,213, respectively. The proposed RS decoder can reduce the total fate count at least 23% and the total latency at least 10% compared with conventional ME architectures.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11a
• /
• pp.73-78
• /
• 2003

In this research, we implement Realtime Air Diffusion Prediction System which is a parallel Fortran model running on distributed-memory parallel computers. The system is designed for air diffusion simulations with four-dimensional data assimilation. For regional air quality forecasting a series of dynamic downscaling technique is adopted using the NCAR/Penn. State MM5 model which is an atmospheric model. The realtime initial data have been provided daily from the KMA (Korean Meteorological Administration) global spectral model output. It takes huge resources of computation to get 24 hour air quality forecast with this four step dynamic downscaling (27km, 9km, 3km, and lkm). Parallel implementation of the realtime system is imperative to achieve increased throughput since the realtime system have to be performed which correct timing behavior and the sequential code requires a large amount of CPU time for typical simulations. The parallel system uses MPI (Message Passing Interface), a standard library to support high-level routines for message passing. We validate the parallel model by comparing it with the sequential model. For realtime running, we implement a cluster computer which is a distributed-memory parallel computer that links high-performance PCs with high-speed interconnection networks. We use 32 2-CPU nodes and a Myrinet network for the cluster. Since cluster computers more cost effective than conventional distributed parallel computers, we can build a dedicated realtime computer. The system also includes web based Gill (Graphic User Interface) for convenient system management and performance monitoring so that end-users can restart the system easily when the system faults. Performance of the parallel model is analyzed by comparing its execution time with the sequential model, and by calculating communication overhead and load imbalance, which are common problems in parallel processing. Performance analysis is carried out on our cluster which has 32 2-CPU nodes.

• The KIPS Transactions:PartB
• /
• v.14B no.4
• /
• pp.273-280
• /
• 2007

This paper presents a new 3D sound toolkit called $EVE-Sound^{TM}$ that consists of pre-processing tool for environment simplification preserving sound effect and 3D sound API for real-time rendering. It is designed so that it can allow users to interact with complex 3D virtual environments by audio-visual modalities. $EVE-Sound^{TM}$ toolkit would serve two different types of users: high-level programmers who need an easy-to-use sound API for developing realistic 3D audio-visually rendered applications, and the researchers in 3D sound field who need to experiment with or develop new algorithms while not wanting to re-write all the required code from scratch. An interactive virtual environment application is created with the sound engine constructed using $EVE-Sound^{TM}$ toolkit, and it shows the real-time audio-visual rendering performance and the applicability of proposed $EVE-Sound^{TM}$ for building interactive applications with complex 3D environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9C
• /
• pp.652-660
• /
• 2008

Applications running under embedded systems require various device drivers designed for different types and versions of the OS to manage resources effectively. In this paper, an automated device driver generator system which can generate the device drivers to be used in newer versions the target OS is proposed. In the proposed system, the structures of device drivers of specific OS are designed in the templates and stored in a library, and the target device drivers are generated by adding codes to the stored templates. Once device drivers are generated, they are registered into the kernel. The experimental results show that data transfer time has been slightly increased when compared against manually created drivers for TFT-LCD driver, USB interface keyboard/mouse driver, and AC'97 controller drivers. The code size for the generated drivers after compilation has also been increased slightly when compared with manually designed device drivers.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.4
• /
• pp.293-300
• /
• 2013

Road signs are important infrastructures for safe and smooth traffic by providing useful information to drivers. It is necessary to establish road sign DB for managing road signs systematically. To provide such DB, manually detection and recognition from imagery can be done. However, it is time and cost consuming. In this study, we proposed algorithms for automatic recognition of direction information in road sign image. Also we developed algorithm code using OpenCV library, and applied it to road sign image. To automatically detect and recognize direction information, we developed program which is composed of various modules such as image enhancement, image binarization, arrow region extraction, interesting point extraction, and template image matching. As a result, we can confirm the possibility of automatic recognition of direction information in road sign image.

• Journal of Radiation Protection and Research
• /
• v.14 no.1
• /
• pp.56-65
• /
• 1989

The nuclear criticality of the KSC-4 shipping cask which can load four assemblies of PWR spent fuel was analyzed using KENO-IV computer code and 19-group nuclear cross section set generated from 218-group neutron cross section library(DLC-43/CSRL) using AMPX system. In accordance with 10CFR71, the analysis was performed for fresh fuel assemblies, instead of the spent fuels, under both norml transportation and hypothetical accident conditions. The calculated maximum multiplication factors(Keff) of the KSC-4 cask were 0.85289 and 0.94185 for the normal transportation and hypothetical accident conditions, respectively. The highest Keff of the KSC-4 cask is within the subcritical limit prescribed in l0CFR71 and accordingly the KSC-4 cask is safely designed in terms of nulear criticality.

• Journal of Radiation Protection and Research
• /
• v.39 no.4
• /
• pp.176-181
• /
• 2014

The object of this paper is to evaluate the fission product inventories and radiological doses in a non-LOCA event, based on the U.S. NRC's regulatory methodologies recommended by the TID-14844 and the RG 1.195. For choosing a non-LOCA event, one fuel assembly was assumed to be melted by a channel blockage accident. The Hanul nuclear power reactor unit 6 and the CE $16{\times}16$ fuel assembly were selected as the computational models. The burnup cross section library for depletion calculations was produced using the TRITON module in the SCALE6.1 computer code system. Based on the recently licensed values for fuel enrichment and burnup, the source term calculation was performed using the ORIGEN-ARP module. The fission product inventories released into the environment were obtained with the assumptions of the TID-14844 and the RG 1.195. With two kinds of source terms, the radiological doses of public in normal environment reflecting realistic circumstances were evaluated by applying the average condition of meteorology, inhalation rate, and shielding factor. The statistical analysis was first carried out using consecutive three year-meteorological data measured at the Hanul site. The annual-averaged atmospheric dispersion factors were evaluated at the shortest representative distance of 1,000 m, where the residents are actually able to live from the reactor core, according to the methodology recommended by the RG 1.111. The Korean characteristic-inhalation rate and shielding factor of a building were considered for a series of dose calculations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.109-116
• /
• 2018

This paper describes an area-efficient design of SHA-256 hash function that is widely used in various security protocols including digital signature, authentication code, key generation. The SHA-256 hash processor includes a padder block for padding and parsing input message, so that it can operate without software for preprocessing. Round function was designed with a 16-bit data-path that processed 64 round computations in 128 clock cycles, resulting in an optimized area per throughput (APT) performance as well as small area implementation. The SHA-256 hash processor was verified by FPGA implementation using Virtex5 device, and it was estimated that the throughput was 337 Mbps at maximum clock frequency of 116 MHz. The synthesis for ASIC implementation using a $0.18-{\mu}m$ CMOS cell library shows that it has 13,251 gate equivalents (GEs) and it can operate up to 200 MHz clock frequency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.1
• /
• pp.29-42
• /
• 1990

In this paper, We use the APL as IDL when simulation a 16-bit SIP. It was possible for IDL to represent and describe a structure of a H/W which other HDL have not. Because We partitioned whole system to various modules when desingning processor, We adpoted a direct decoding method. A designed each modules are executed according to 12-bit control word was inputed through experimental framework, Which were composed to symbolized instructions. In here, By setting instruction codes of the SIP using binary code, We composed instruction format and assembler instruction, and verified the SIP behaviour that try to implement by entering a presented instruction set through experimental framework. In a presented SIP, Because inputing program are a symbolized language, Designer and user will easily understand behaviour of system. Especially, Because we can immediatly specify a unit function within SIP, We will use variously and easily the library cell.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.170-172
• /
• 2017

Due to the technological advances in modern society, the distinction between mask and authenticity is becoming very difficult. to solve these problems, this paper describes a high-level improvement of the image processing technique of the code authentication system which discriminates the good and the bad by using the color information and the dot information. Labels were given to each genuine article and the article, which can not be distinguished from each other. In the proposed method, image matching of labels is performed using the opencv library, and genuine and good products are discriminated by using the halftone dots and w dot dots of each label. In this paper, the proposed method stores genuine and good labels on the server and compares them with the user's labels to determine genuine products.