• 전기학회논문지
• /
• 제61권4호
• /
• pp.585-589
• /
• 2012

The characteristics of interface layer and the effect of mole fraction of inlet gas mixture($B_2H_6/H_2/N_2/TiCl_4$) on the microstructure of Ti(B,N) films were studied by microwave plasma hot filament CVD process. Ti(B,N) films were deposited on a substrate(STD-61) to develop a high performance of resistance wear coating tool. Ti(B,N) films were obtained at a gas pressure of 1 torr, bias voltage of 300 V and substrate temperature of $480^{\circ}C$ in $B_2H_6/H_2/N_2/TiCl_4$gas system. It was found that TiN, $TiB_2$, TiB and hexagonal boron nitride(h-BN) phases exist in thin layer on the STD-61.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.247-250
• /
• 1998

Ferroelectric PZT(10/90)PZT(90/10) heterolayered thin films were fabricated by spin-coating method on the Pt/Ti/SiO$^2$/Si substrate alternately using PZT(10/90) and PZT(90/10) metal alkoxide solutions. The coating and heating procedure was repeated six times to form PZT heterolayered films. The surface, cross-sectional microstructures and thickness of the films were observed using scanning electron microscope(SEM). The relative dielectric constant and dielectric loss of the 5-coated PZT heterolayered films were 1331 and 4.8% respectively.

• 한국표면공학회지
• /
• 제39권3호
• /
• pp.87-92
• /
• 2006

The characteristic of interface layer and the effect of bias voltage on the microstructure of c-BN films were studied in the microwave plasma hot filament C.V.D process. c-BN films were deposited on a high speed steel(SKH-51) substrate by hot filament CVD technique assisted with a microwave plasma to develop a high performance of resistance coating tool. c-BN films were obtained at a gas pressure of 20 Torr, vias voltage of 300 V and substrate temperature of $800^{\circ}C$ in $B_2H_6-NH_3-H_2$ gas system. It was found that a thin layer of hexagonal boron nitride(h-BN) phase exists at the interface between c-BN layer and substrate.

• Korean Chemical Engineering Research
• /
• 제51권1호
• /
• pp.73-79
• /
• 2013

Polycarbonate diol (PCD), isophorone diisocyanate (IPDI)와 dimethylol propionic acid (DMPA)를 출발물질로 하여 수분산 폴리우레탄(waterborne polyurethane dispersion, WPUD)을 합성하였다. WPUD에 아크릴 단량체인 methyl methacrylate (MMA)를 첨가하여 수분산 아크릴 폴리우레탄(waterborne acrylic polyurethane dispersion, AUD)을 합성하였다. 이 AUD와 물에 분산되어 있는 multi-walled carbon nanotube (MWCNT)를 혼합하여 전도성 코팅 용액을 제조한 후 polycarbonate 시트 위에 도포하여 코팅 도막을 형성하였다. AUD 중의 MMA의 첨가량이 증가될수록 코팅 도막의 연필경도, 내마모성 및 내약품성은 향상되었으나 전기 전도도는 감소하였다. 반면에 전도성 코팅 용액 중의 MWCNT의 첨가량이 증가될수록 코팅 도막의 연필경도, 내마모성 및 내약품성은 감소되었으나 전기 전도도는 증가하였다.

• 센서학회지
• /
• 제7권2호
• /
• pp.117-123
• /
• 1998

알루미나 기판위에 스핀코팅에 의해 $In_{2}O_{3}$ 박막을 형성하고 그 박막의 미세구조와 가스감지특성을 조사하였다. 코팅용액은 $In(OH)_{3}$ 수용액에 초산을 첨가하여 합성되었다. 이 용액에 바인더로써 암모니아 카르복실 셀루로오스를 섞어서 코팅용액으로 사용하였다. 이 용액을 $1{\sim}7$회 스핀코팅하고 $110^{\circ}C$에서의 건조와 $600^{\circ}C$에서의 열처리에 의해 두께 $71{\sim}210nm$의 $In_{2}O_{3}$ 박막을 얻을 수 있었다. 제조된 박막은 미세한 $In_{2}O_{3}$ 결정입자($23{\sim}27nm$)가 적층된 형태의 구조를 가지고 알루미나 기판의 결정입위에 균일하게 코팅되었다. 박막의 두께는 스핀코팅의 횟수에 선형적으로 증가하였다. 제조된 박막은 CO, $H_{2}$ 가스에 대해 높은 감도와 빠른 응답특성을 나타내었다.

• Macromolecular Research
• /
• 제16권8호
• /
• pp.725-733
• /
• 2008

Polyimide (PI) multilayer thin films were prepared by spin-coating from a poly(amic acid) (PAA) and poly(amic acid) ammonium salt (PAAS). PI was prepared from pyromellitic dianhydride (PMDA) and 4,4'-oxydianiline (ODA) PAA. Different compositions of PAAS were prepared by incorporating triethylamine (TEA) into PMDA-ODA PAA in dimethylacetamide. PI multilayer thin films were spin-coated from PMDA-ODA PAA and PAAS. The PAAS comprising cationic and anionic moieties were spherical with a particle size of $20{\sim}40\;nm$. Some particles showed layers with ammonium salts, despite poor ordering. Too much salt obstructed the interaction between the polymer chains and caused phase separation. A small amount of salt did not affect the interactions of the interlayer structure but did interrupt the stacking between chains. Thermogravimetric analysis (TGA) showed that the average decomposition temperature of the thin films was $611^{\circ}C$. All the films showed almost single-step, thermal decomposition behavior. The nanostructure of the multilayer thin films was confirmed by X -ray reflectivity (XRR). The LF 43 film, which was prepared with a 4:3 molar ratio of PMDA and ODA, was comprised of uniformly spherical PAAS particles that influenced the nanostructure of the interlayer by increasing the interaction forces. This result was supported by the atomic force microscopy (AFM) data. It was concluded that the relationship between the uniformity of the PAAS particle shapes and the interaction between the layers affected the optical and thermal properties of PI layered films.

• 한국식품과학회지
• /
• 제29권6호
• /
• pp.1184-1190
• /
• 1997

Corn zein을 코팅한 carrageenan복합필름을 미리 제조한 carrageenan필름을 polyethylene glycol (20% (w/w) of CZ)과 glycerol (24% (w/w) of CZ)을 함유하는 corn zein 용액(10, 20 and 30% in 95% ethyl alcohol)에 침지하여 제조하였다. 각 필름에 대하여 수증기투과도, 수분용해도, 팽윤도, 인장강도, 연신도, 열접착강도 및 색도를 측정하였다. carrageenan필름의 수증기 투과도는 corn zein 용액의 농도가 증가할수록 유의적인 차이(p<0.05)를 나타내며 감소하였다. 필름의 수분 용해도와 팽윤도는 corn zein 용액의 농도가 증가할수록 직선적으로 감소하였으며, 인장강도 역시 코팅용액의 농도에 대하여 직선적인 감소를 나타냈다. 코팅용액의 농도에 관계없이 모든 코팅필름은 열접착특성을 갖는것으로 나타내었으며, 이들의 열접착강도는 corn zein 필름의 약 절반에 미달하는 수준이었다. corn zein으로 코팅을 함으로 필름의 색도의 변화를 나타냈는데 이는 황색도(Hunter b-value)의 증가에 기인하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.135-135
• /
• 2003

This paper presents the preparation of SnO$_2$ films by Sol-Gel process and using spin coating method, and their sensing properties in CO gas. Experimental procedure consisted of following steps: (1) Tin chloride(SnCl$_4$) and Ammonium hydrogen carbonate (NH$_4$HCO$_3$) were used as precursors; (2) the Sol solution with concentration of about 10wt% SnO$_2$ was prepared from washed Gel-precipitate for spin coating step; (3) thereafter, the coating solution was dropped onto the alumina (Al$_2$O$_3$) substrate that was then spun, the spin coating was carried out with total 10 times; (4) finally, the films were calcined for 3 hours at 50$0^{\circ}C$ or higher temperature (600, 700, 800 or 90$0^{\circ}C$) in order to obtain various gram sizes. The average grain size was calculated by Scherrer's equation using main peaks in XRD spectra; meanwhile the thickness, microstructure and surface morphology of the films were observed by FE-SEM.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.962-964
• /
• 1999

We studied emitting properties of devices fabricated using the spin-coating and Langmuir-Blodgett[LB] technique. The LB technique has the advantage of precise control of the thickness better than spin-coating method. Poly(3-hexylthiophene)[P3HT] LB films used as the emitting layer in light-emitting devices. LB monolayers were deposited 27 layers onto the indium-tin-oxide[ITO] as Y-type films by the vertical dipping method. The thickness is about 80nm. Absorption spectrum of LB films presented that P3HT is regiorandom conformation. Also, current-voltage-luminance characteristics and electroluminescence spectra of light-emitting devices fabricated by LB method is studied. In current-voltage-luminescence characteristics, turn-on voltage of P3HT LB film LEDs is higher than that of spin-coating LEDs. But electroluminescence spectrum is similar to the spin-coating LEDs. The orange-red light was clearly visible in a darkened room.

• 한국전기전자재료학회논문지
• /
• 제17권9호
• /
• pp.967-972
• /
• 2004

Hardness and surface property of coated gel materials are considerably different according to kinds(particle size/stabilized ion) of colloidal silica(CS), kinds of silanes, content ratio of silane versus CS, and reaction degree in sol solution. We report the properties of sol-gel coating materials in which the factors of reaction are kinds of CS, contents ratio of CS and MTMS, and reaction time of sol. The contact angles of the coated films obtained from the mixed CS system showed a little good relationship with MTMS content increase to those from HSA CS reaction system and the change of contact angle didn't have much effect on reaction time of sol. In the coating films obtained from HSA CS reaction system, the surface was much rough in case of that the content MTMS decreased and the reaction of sol kept long. The surface roughness of films obtained from the mixed CS reaction system showed similar tendency, though its degree was a little different. In synthesis of sol-gel coating materials, we could identify that choice of CS kinds and content ratio of CS and silane were important and it was desirable the reaction time of sol is not long.