• Clinical and Experimental Reproductive Medicine
• /
• v.34 no.1
• /
• pp.49-56
• /
• 2007

Objective: To evaluate the effect of short coasting, by withdrawing both gonadotropins and GnRH agonist (GnRHa), on the prevention in severe ovarian hyperstimulation syndrome(OHSS) without compromising pregnancy outcome. Method: Thirty-seven women who had been coasted during COH for IVF were coasted when $\geq$20 follicles > 15 mm with serum E$_2$ level of 4,000 pg/ml were detected. Coasting was initiated for one or two days depending on the status of follicle on ultrasound and serum E$_2$ level. Both gonadotropin and GnRHa were withheld for coasting. Retrospective study was carried and changes of serum E$_2$ levels, number of oocytes retrieved, fertilization rate, pregnancy rate were compared and analyzed. Results: The mean serum E$_2$ level fell from 6,993 pg/ml on the onset of coasting to 3,396 pg/ml on the day of hCG administration. The mean number of oocytes retrieved and fertilization rate were 15.7 and 70.0%, respectively. Fifteen patients were pregnant (40.6%) and implantation rate was 15.2%. Twenty-six (70.3%) patients were coasted for one day and 11 (29.7%) were coasted for two days. The mean decrease rate of serum E$_2$ level was 43% in one day coasting group and 15% (1$^{st}$ day) and 81% (2$^{nd}$ day) in two day coasting group. The pregnancy outcome was similar between the two groups. After coasting, no severe or moderate OHSS occurred in any patients and mild OHSS occurred in 3(8.1%) patients. Conclusions: Coasting for one or two days can be used successfully in the prevention of OHSS without compromising IVF cycle outcome.

• Journal of Industrial Technology
• /
• v.30 no.A
• /
• pp.31-35
• /
• 2010

In this paper, a speed estimation method at coasting operation in an induction motor speed sensorless control for railway vehicle traction systems is presented. At coasting operation, there is no information obtaining rotor speed since all switches of an inverter are turned off. The inverter frequency should be synchronized with the rotor frequency for repowering at coasting condition. The proposed method injects DC current to the induction motor during a short time, then the flux angle and rotor speed needed for control can be estimated rapidly.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.878-886
• /
• 2009

This paper proposes an optimal algorithm for generating a train speed profile giving optimal energy efficiency based on GA (Genetic Algorithm) and shows its effectiveness with simulations. After simplifying the train operation mode to a maximum traction, a coasting and a maximum breaking, adjusting the coasting point to minimize the train consuming energy is the basic scheme. Satisfying the two constraints, running distance and running time between two stations, a coasting point is determined by GA with a fitness function consisting of a target running time. Simulation results have shown that multiple coasting points could exist satisfying both of the two constraints. After figuring out consumed energies according to the multiple coasting points, an optimal train speed profile with a coasting point giving the smallest consumed energy has been selected. Simulation blocks for the train performance simulation and GA have been designed with the Simulink.

• Journal of the Korean Society for Railway
• /
• v.10 no.2 s.39
• /
• pp.153-160
• /
• 2007

To start or stop the train safely within the limited traveling distance, it is necessary to guarantee the proper traction or braking force. Presently, most trains are run by the electrical power and have adopted a combined electrical and mechanical(friction) braking system. In order to design a good traction or a brake system, it is essential for designers to predict the traction or brake performance. In this paper, the traction/coasting/braking performances analysis program has been developed and verified by comparing the simulation results with on-line test results of the Korean high speed train(HSR-350); Both results match very well. Consequently, the designers can predict the traction/coasting/braking performances of trains by using the proposed program under various operating conditions.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.4
• /
• pp.1-6
• /
• 2003

In this Paper, the moving image is detected by a collision preventive system. The noise of these images is reduced by a mean filter. In case of detecting a movement with a binary difference image the moving area is detected exactly by the labeling and the projective method. When the image move slowly with the tracking mode of the system, the center of the tracking window move to the previous tracking window. And the tracking windows are divided into a tracking mode and a coasting mode which are determine by the Contrast-Difference Correlation of the date obtained from a difference image. The coasting mode determine whether continue the tracking step or not comparing the coasting-time values to reducing the error by the disturbance. The coasting and tracking of these moving images are verified by the result of the simulation.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.119-125
• /
• 2007

The equation of Resistance to motion of the Korean high-speed train has been calculated and evaluated using train speed measurements gathered from coasting tests in the speed range from 30km/h to 300km/h and wind tunnel test of 1/25th scale model. The factors of resistance to motion have been decomposed into various coefficients which compose the coefficients of Davis equation referring the general resistance to motion equation of KTX train. The coefficients of Korean high-speed train has been calculated using the measurements of coasting tests and the results of wind tunnel test has been implemented to consider the minor shape modification after the coasting tests.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1594-1598
• /
• 2007

Energy saving is an important topic for each heavy user of the power system, including railway operators. Therefore, four strategy of train operations studied that maximum speed reduction, reduced acceleration rate, anticipatory coasting, and saw-tooth coasting for energy saving. The Simulation model of the study used to investigate the performance of a railway system, and it was used to study the effect of energy saving strategies for the train operation. The Study investigate train operation strategy for energy saving, investigate the effect of strategy, and find the energy optimization of acceleration, coasting, braking section used Run-Curve simulator from train data.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.10
• /
• pp.1816-1822
• /
• 2010

In this research TPS (Train Performance Simulation) blocks are designed using Simulink and applied to generate speed profiles for energy-efficient train operation. With a train operation mode of maximum powering, coasting, and maximum breaking, a breaking point is calculated from forward-backward running profiles. Then, GA (Genetic Algorithm) is used to solve a running time constraint, and a coasting point is produced from the searching process of GA. With the breaking point and the coasting point a speed profile is plotted. Train performance under a speed limit and gradient variations is simulated and resultant speed profiles are analyzed.

• Journal of the Korean Society for Railway
• /
• v.17 no.3
• /
• pp.165-170
• /
• 2014

The resistance to motion of the Korean next-generation high-speed train (HEUM-430X) was assessed on the basis of 12 coasting test runs at coasting speeds up to approximately 380km/h. Two different methods, a linear regression method and a time-integral method, were employed to calculate decelerations from the time-velocity data and the time-distance data, respectively, and an equation of resistance to motion was devised from the deceleration data calculated at each time section. The effect of an improvement of the aerodynamic shape on the resistance to motion was investigated, with the results showing that the running resistance was reduced by about 15% due to these improvements. An increase of approximately 28% of the running resistance was also noted when running in a tunnel relative to running through an open field.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.1
• /
• pp.11-22
• /
• 2018

The safety of tunnels is quantified by quantitative risk assessment when planning the disaster prevention facilities of railway tunnels, and it is decided whether they are appropriate. The purpose of this study is to estimate the probability of the train stopping in the tunnels at train fire, which has a significant effect on the results of quantitative risk assessment for tunnel fires. For this purpose, a model was developed to calculate the coasting distance of the train considering the coefficient of train running resistance. The probability of stopping in case of train fire in the tunnel is predicted by the Monte Carlo simulation method with the coasting distance and the emergency braking distance as parameters of the tunnel lengths and slopes, train initial driving speeds. The kinetic equations for predicting the coasting distance were analyzed by reflecting the coefficient train running resistance of KTX II. In the case of KTX II trains, the coasting distance is reduced as the slope increases in a tunnel with an upward slope, but it is possible to continue driving without stopping in a slope downward. The probability of the train stopping in the case of train fire in tunnel decreases as the train speed increases and the slope of the tunnel decreases. If human error is not taken into account, the probability that a high-speed train traveling at a speed of 250 km/h or above will stop in a tunnel due to a fire is 0% when the slope of the tunnel is 0.5% or less, and the probability of stopping increases rapidly as the tunnel slope increases and the tunnel length increases.