• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1994년도 춘계연구발표회 논문개요집
• /
• pp.68-69
• /
• 1994

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1999년도 춘계연구발표회 논문개요집
• /
• pp.88-89
• /
• 1999

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.99-101
• /
• 1996

This paper is concerned with the fabrication of (Fe,Co)-Si-B amorphous magneto-strictive wire which attracts strong attention as a new sensor material. First, we put the ingot of (Fe$\sub$1-x/Co$\sub$x/)$\sub$77/Si$\sub$8/B$\sub$15/ composition into quartz tube. Then, under the condition of 400MHz and 8kW, we melt and mix the in-got in the high frequency induction furnance. After that, we obtain the magnetostrictive wire of 100∼150$\mu\textrm{m}$ in diameter by injection and rapid quenching within the high rotating water. Finally, we find that the wire is under the amorphous state.

• 한국자기학회지
• /
• 제19권1호
• /
• pp.17-21
• /
• 2009

코발트계 아몰퍼스와이어와 검출코일을 이용하여서 제작한 직교 플럭스게이트 센서에 있어서 구동주파수와 입력전류가 센서의 출력특성에 미치는 영향을 조사하였다. 구동전류가 0.3 A까지 증가함에 따라서 센서의 출력전압은 증가하는 경향을 나타내었으나, 그 이상의 구동전류에 대하여서는 출력전압의 증가율이 둔감하게 되었고 0.6 A 이상의 구동전류에 대하여서는 출력전압이 감소하는 경향을 나타내었다. 센서의 구동주파수를 1.3 MHz까지 높임으로써 출력전압을 높일 수 있었으나, 그 이상의 구동주파수에서는 출력전압이 감소하는 것을 알 수 있었다. 1.3MHz의 구동주파수에 대하여 출력전압은 3.8 V였으며, 1 MHz의 구동주파수에 대하여서는 1.32 V였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.89-92
• /
• 1996

In this paper, we mention the study on the sensing function of amorphous magneto- striction wire with about 125${\mu}{\textrm}{m}$$\Phi$ in diameter. The wire in fabricated by using injection and quenching method under the high speed rotating water flow. The wire\`s compotion is (Fe$_{75}$ $Co_{25}$)$_{77}$Si$_{8}$B$_{15}$ , and generates sharp Matteucci voltage by large Barkhausen jump effect even the weak magnetic field. In this study, we don\`t use pick-up coil. Instead, we apply external magnetic field of 3.6Oe in the direction orthogonal to the wire. Then, we detect Matteucci voltage of 1.lmV to both side of 20cm amorphous-wire. Thus, we find that the fabricated wire has the function necessary as the high sensitive sensor material.l.al.l.

• Journal of Magnetics
• /
• 제18권2호
• /
• pp.159-162
• /
• 2013

We present how to optimize the operation condition including frequency of the orthogonal fluxgate sensor in this paper. The orthogonal fluxgate sensor was fabricated with a Co-based amorphous wire with 10 mm long and 100 ${\mu}m$ in the diameter and a 270-turn pickup coil wound on the amorphous wire. In order to investigate the frequency dependence of the sensitivity, output spectra of the sensor which was connected by using a coaxial cable with various lengths of 0.5-5 m were measured with a RF lock-in amplifier. The maximum sensitivities were obtained at different frequencies according to coaxial cable lengths. It was found that the optimal operation frequencies, at which maximum sensitivities were appeared, were almost identical to the frequencies of impedance resonance. The maximum sensitivity and optimal operation frequency were 1.1 V/Oe (${\approx}$ 11000 V/T) and 1.25 MHz respectively.

• 한국표면공학회지
• /
• 제50권3호
• /
• pp.177-182
• /
• 2017

The properties of electroless Ni-B thin film on diamond powder with different parameters (temperature, pH, surfactant etc.) were studied. The surface morphology, structure and composition distribution of the Ni-B film were observed by field effect scanning electron microscope (FE-SEM), energy-dispersive spectrometer (EDS), X-ray diffraction (XRD) and Auger electron spectroscopy (AES). The growth rate of Ni-B film was increased with increase of bath temperature. The B content in Ni-B film was reduced with increase of bath pH. As a result the structure of Ni-B film was changed from amorphous to crystalline structure. The PVP in solution plays multi-functional roles as a dispersant and a stabilizer. The Ni-B film deposited with adding 0.1 mM-PVP was strongly introduced an amorphous structure with higher B content (25 at.%). Also the crystallite size of Ni-B film was reduced from 12.7 nm to 5.4 nm.

• 비파괴검사학회지
• /
• 제28권5호
• /
• pp.401-406
• /
• 2008

최근 바이오센서, 비파괴진단, 방위센서 등 다양한 분야에서 휴대가 가능하며 감도가 높은 자기센서에 대한 요구가 증대되고 있다. 연자성 리본의 거대 자기임피던스 효과를 이용한 새로운 휴대용 고감도 자기임피던스 센서 시스템을 개발하였다. 자기임피던스 센서는 $Co_{66}Fe_{4}Si_{15}B_{15}$ 연자성 비정질 리본을 공기중에서 자기장 열처리하는 방법으로 교환결합을 발생시켜 비대칭 자기임피던스 특성을 부여한 센서용 헤드와 신호처리 회로로 구성되었다. 개발된 센서는 $-1\;Oe\;{\sim}\;1\;Oe$의 다이나믹 레인지에서 선형에 가까운 특성을 보였으며 자기장 민감도는 약 10.5 V/Oe 였다. 자기임피던스 센서 시스템이 와이어로프의 결함 진단 장치에 응용될 수 있음을 보였다.