• Advances in nano research
• /
• 제2권4호
• /
• pp.179-186
• /
• 2014

Indium-nitrogen co-doped zinc oxide thin films (INZO) were prepared on glass substrates in the atmosphere by ultrasonic spray pyrolysis. The aqueous solution of zinc acetate, ammonium acetate and different indium sources: indium (III) chloride and indium (III) nitrate were used as the precursors. After film deposition, different anneal temperature treatment as 350, 450, $550^{\circ}C$ were applied. Electrical properties as concentration and mobility were characterized by Hall measurement. The surface morphology and crystalline quality were characterized by SEM and XRD. With the activation energy analysis for both films, the concentration variation of the films at different heat treatment temperature was realized. Donors correspond to zinc related states dominate the conduction mechanism for these INZO films after $550^{\circ}C$ high temperature heat treatment process.

• 한국세라믹학회지
• /
• 제55권5호
• /
• pp.461-472
• /
• 2018

$Gd_2O_3:Eu/Bi$ nanoparticles were synthesized via spray pyrolysis and applied for the preparation of a luminescent pearl pigment as an anti-counterfeiting material. The luminescence properties were optimized by changing the $Eu^{3+}$ and $Bi^{3+}$ concentration. Ethylene glycol was used as an organic additive to prepare the $Gd_2O_3:Eu/Bi$ nanoparticles. The highest emission intensity was achieved when the total dopant content was 10.0 at.% and the mole fraction of Bi was 0.1. The concentration quenching was mainly due to dipole-dipole interactions between the same activators, and the critical distances were 9.0 and $19.6{\AA}$ for $Eu^{3+}$ and $Bi^{3+}$, respectively. The prepared $Gd_2O_3:Eu/Bi$ powder exhibited an average size of approximately 82.5 nm and a narrow size distribution. Finally, the $Gd_2O_3:Eu/Bi$ nanophosphor coated on the surface of the pearl pigment was confirmed to have good red emission under irradiation from a portable ultraviolet light-emitting diode lamp (365 nm).

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제29권2호
• /
• pp.1-10
• /
• 2024

With industrial development, the inevitable increase in both organic and inorganic waste necessitates the exploration of waste treatment and utilization methods. This study focuses on co-pyrolyzing lignin and red mud to generate metalbiochar, aiming to demonstrate their potential as effective adsorbents for water pollutant removal. Thermogravimetric analysis revealed mass loss of lignin below 660℃, with additional mass loss occurring (>660℃) due to the phase change of metals (i.e., Fe) in red mud. Characterization of the metal-biochar indicated porous structure embedded with zero-valent iron/magnetite and specific functional groups. The adsorption experiments with 2,4-dichlorophenol and Cd(II) revealed the removal efficiency of the two pollutants reached its maximum at the initial pH of 2.8. These findings suggest that copyrolysis of lignin and red mud can transform waste into valuable materials, serving as effective adsorbents for diverse water pollutants.

• 한국환경과학회지
• /
• 제25권2호
• /
• pp.281-288
• /
• 2016

After analyzing of heating value of four kinds of RDF, the RDF-D has the highest heating value, was chosen to be mixed with carbonized sludge by different ratio. The 85%:15% ratio, which has the highest efficiency, was analyzed with thermogravimetric and pyrolysis kinetics. Applying of Kissinger method, activation energy was obtained from slope which is calculated from relation of ln(${\beta}/T^2{_m}$) and $1/T_m$. The kinetic parameters obtained from Kissinger method were 46.06 kJ/mol of RDF, 55.99 kJ/mol of carbonized sludge and 40.68 kJ/mol of mixture of RDF and carbonized sludge. The mixture of RDF and carbonized sludge has the lowest activation energy and frequency factor, during thermal decomposition reaction it has the slowest reaction rate and needs the lowest energy. Although activation energy with pyrolysis of RDF was irregularly scattered, it showed that activation energy was stabilized by co-pyrolysis of RDF and additives(Carbonized Sludge).

• 한국항공우주학회지
• /
• 제41권8호
• /
• pp.597-604
• /
• 2013

본 논문에서는 열분해 및 삭마 환경의 복합재 구조물에 대한 열기계적 연계 해석을 수행하였다. 열분해 과정의 재료 밀도 감소, 기공 가스 확산, 흡열 반응 에너지와 삭마 과정에서의 표면 침식 효과 등을 고려하였다. 상용 유한요소 코드에 교차 연계 알고리듬을 적용하여 완전 연계된 열 해석 및 구조 해석 인터페이스를 구성하였다. 수치 실험을 통해서 탄소/페놀릭 복합재료의 기본적인 열분해 및 삭마 특성을 분석하였다. 특히, 화학적 및 기계적 삭마에 영향을 미치는 주요 인자에 따른 표면 침식량 등을 비교하였다. 또한, 열분해 과정의 수축 또는 팽창 변형도가 재료의 열기계적 거동에 미치는 영향도 검토하였다.

• 한국수소및신에너지학회논문집
• /
• 제19권6호
• /
• pp.514-519
• /
• 2008

In the present study, biomass pyrolysis was done using five different kinds of catalysts with change in the support species and their compositions. Ni was loaded on alumina, ceria and alumina-ceria supports using co-precipitation method. In all the catalysts, 30wt% of nickel was loaded on the support materials. The paper used in daily writing purposes was taken into account as biomass sample. In the experiment, 19 of biomass was mixed with o.1g of each catalyst separately. Thermogravimetric analysis (TGA) was performed with all the catalysts diminished the initial degradation temperature of paper biomass sample considerably. During the pyrolysis process, the temperature was raised from room temperature to $800^{\circ}C$ with the heating rate of $10^{\circ}C$/min in the furnace. The cumulative $H_2$ volume had reached the best value of l4.02ml with the Ni/$Al_2O_3-CeO_2$ 30wt%/(50wt%-50wt%) catalysts. In presence of all the catalysts, the highest amount of $H_2$ was produced at $800^{\circ}C$, 10min. of residence time.

• 한국생산제조학회지
• /
• 제24권4호
• /
• pp.469-474
• /
• 2015

In ultrasonic spray pyrolysis deposition, a precursor solution is evaporated by an ultrasonic atomizer, then gas-carried into a furnace where the solute is separated from the water vapor. After condensation, polymerization, and nucleation, the solute oxide forms a thin film. To improve the deposition efficiency, the ultrasonic atomizer was studied to optimize the evaporated gas flow. The vat cover was redesigned, using three versions with different inlet factors being tested through a computational fluid dynamic analysis as well as a water evaporation experiment. The atomization rate with a hemispherical cover with a $30^{\circ}$ inlet was found to be 2.4 times higher than that with the original. This improvement was verified with fluorine-doped tin oxide spray pyrolysis deposition. The film obtained with the modified vat cover was 2.4 times thicker than that obtained with the original vat cover.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2006년도 High Temperature Superconductivity Vol.XVI
• /
• pp.68-68
• /
• 2006

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2006년도 High Temperature Superconductivity Vol.XVI
• /
• pp.99-99
• /
• 2006

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.713-716
• /
• 2007

Interests have been focused to the renewable energy because energy cost of fossil fuel increased and global climate change caused by CO2 evolution became severe. To overcome these problems, it is essential to develop the energy conversion technologies of renewable resources. Therefore, production and utilization state of wood and woody waste was firstly investigated and then various technologies (pyrolysis, gasification, and combustion) converting the wood and woody waste to energy were summarized. Some case studies of woody waste utilization in europe was introduced with the policy of EU countries. Economical aspect of woody waste was compared with the current fossil fuels and the energy policy of wood and woody waste was suggested.