• 한국안전학회지
• /
• 제23권5호
• /
• pp.54-60
• /
• 2008

The objective of this study is to obtain the optimal process condition and the maximum decomposition efficiency by measuring the decomposition efficiency, electricity consumption, and voltage in accordance with the change of the process variables such as the frequency, maintaining time period, concentration, electrode material, thickness of the electrode, the number of windings of the electrode, and added materials etc. of the harmful atmospheric contamination gases such as NO, $NO_2$, and $SO_2$ etc. with the plasma which is generated by the discharging of the specially designed and manufactured $TiO_2$ catalysis reactor and SPCP reactor. The decomposition efficiency of the NO, the standard samples, is obtained with the plasma which is being generated by the discharge of the combination effect of the $TiO_2$ catalysis reactor and SPCP reactor with the variation of those process variables such as the frequency of the high voltage generator($5{\sim}50kHz$), maintaining time of the harmful gases($1{\sim}10.5sec$), initial concentration($100{\sim}1,000ppm$), the material of the electrode(W, Cu, Al), the thickness of the electrode(1, 2, 3mm), the number of the windings of the electrode(7, 9, 11turns), basic gases($N_2$, $O_2$, air), and the simulated gas($CO_2$) and the resulting substances are analyzed by utilizing FT-IR & GC.

• 한국재료학회지
• /
• 제21권12호
• /
• pp.666-672
• /
• 2011

The a-Si:H/c-Si hetero-junction (HJ) solar cells have a variety of advantages in efficiency and fabrication processes. It has already demonstrated about 23% in R&D scale and more than 20% in commercial production. In order to further reduce the fabrication cost of HJ solar cells, fabrication processes should be simplified more than conventional methods which accompany separate processes of front and rear sides of the cells. In this study, we propose a simultaneous deposition of intrinsic thin a-Si:H layers on both sides of a wafer by dual hot wire CVD (HWVCD). In this system, wafers are located between tantalum wires, and a-Si:H layers are simultaneously deposited on both sides of the wafer. By using this scheme, we can reduce the process steps and time and improve the efficiency of HJ solar cells by removing surface contamination of the wafers. We achieved about 16% efficiency in HJ solar cells incorporating intrinsic a-Si:H buffers by dual HWCVD and p/n layers by PECVD.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제23권3호
• /
• pp.27-42
• /
• 2018

It is important to identify the contaminant sources and to evaluate the fate and transport of heavy metals to crops in agricultural lands. This study was conducted to evaluate metal sources and its transfer and accumulation to crop in agricultural soils. Pollution indices were calculated and multivariate analysis was performed to identify metal sources. To evaluate transfer and accumulation of metals to crops, the contents of phytoavailable metals were evaluated by using single extraction method and the correlation between metal content and soil properties was analyzed. Also the BCF was quantitatively evaluated for investigating the metal transition to each crop grown in the research area. As a result, Cr, Ni, and Co were expected to be mainly derived from geologic factors due to weathering of certain parent rocks. The content of nickel in soils of the research area was slightly higher than that of the concern level criteria based on total concentration, but the amount transferred and accumulated in the crops was actually low. Understanding the contamination characteristics by investigating the pollution sources of heavy metals and its transfer and accumulation to crops through various evaluation techniques could provide important information for proper management of the agricultural land.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권4호
• /
• pp.46-49
• /
• 2018

To improve in-field critical current densities ($J_c$) of $GdBa_2Cu_3O_{7-{\delta}}$ (GdBCO) coated conductors(CCs) fabricated by the reactive co-evaporation by deposition and reaction (RCE-DR) process, employing the nominal composition of Gd:Ba:Cu=1:1:2.5, we tried to refine the $Gd_2O_3$ particles trapped in the GdBCO superconducting matrix. For this purpose, we carefully selected the processing conditions on the stability phase diagram of GdBCO for this composition. By lowering the growth temperature of $Gd_2O_3$ in the liquid, we could refine the average particle size of $Gd_2O_3$ particles trapped in the GdBCO matrix and also achieve the zero-resistive transition temperatures ($T_{c,zero}$) of 92.3~94.2 K. Unfortunately, however, it was unsuccessful to achieve enhanced in-field $J_c$ values from these samples because of an air-contamination of the amorphous precursor film before its conversion into crystalline GdBCO film, suggesting that any exposure of the amorphous precursor film to air is fatal in obtaining high performance GdBCO CCs via the RCE-DR process.

• 지질공학
• /
• 제29권2호
• /
• pp.113-122
• /
• 2019

본 연구에서는 도로터널 건설시 감소하는 지하수위 저하의 범위와 이로 인한 인근 계곡 소하천의 영향을 평가하기 위한 유동해석 및 터널공사 시 오탁수 배출에 의한 인근 수원의 오염여부를 평가하기 위한 오염물 이동 해석을 수행하였다. 터널굴착 공기인 30개월 동안 하강하는 지하수의 저하량은 최대 27 m로 나타났고 터널중심에서 50 m 이내에서 가장 큰 것으로 확인되었다. 또한 이로 인한 지하수의 유동이 터널 내로 유입되는 형상으로 보여주고 있으며 터널반경 200 m까지는 적지만 수위저하의 영향이 나타났다. 터널에서 배출되는 오탁수 배출의 영향을 검토하기 위한 오염물 이동 수치모델링 결과 터널종단부에서 발생하는 탁수의 거동범위는 최대 120 m내외이며 이로 인한 소하천의 오염 위험은 크지 않을 것으로 평가되었다.

• Journal of Ecology and Environment
• /
• 제45권1호
• /
• pp.1-9
• /
• 2021

Background: Abandoned coal piles after the closure of mines have a potential negative influence on the environment, such as soil acidification and heavy metal contamination. Therefore, revegetation by efficient species is required. For this, we wanted to identify the role of Silene acaulis in the succession of coal piles as a pioneer and a nurse plant. S. acaulis is a well-studied cushion plant living in the Arctic and alpine environments in the northern hemisphere. It has a highly compact cushion-like form and hosts more plant species under its canopy by ameliorating stressful microhabitats. In this research, we surveyed vegetation cover on open plots and co-occurring species within S. acaulis cushions in coal piles with different slope aspects and a control site where no coal was found. The plant cover and the similarity of communities among sites were compared. Also, the interaction effects of S. acaulis were assessed by rarefaction curves. Results: S. acaulis was a dominant species with the highest cover (6.7%) on the coal piles and occurred with other well-known pioneer species. Plant communities on the coal piles were significantly different from the control site. We found that the pioneer species S. acaulis showed facilitation, neutral, and competition effect in the north-east facing slope, the south-east facing slope, and the flat ground, respectively. This result was consistent with the stress gradient hypothesis because the facilitation only occurred on the north-east facing slope, which was the most stressed condition, although all the interactions observed were not statistically significant. Conclusions: S. acaulis was a dominant pioneer plant in the succession of coal piles. The interaction effect of S. acaulis on other species depended on the slope and its direction on the coal piles. Overall, it plays an important role in the succession of coal piles in the High Arctic, Svalbard.

• 한국미생물·생명공학회지
• /
• 제50권2호
• /
• pp.202-210
• /
• 2022

Aflatoxin contamination in rice has been documented in a number of studies, and has a high incidence in Asian countries, and as such, there has been a growing interest in alternative biocontrol strategies to address this issue. In this study, 147 strains of yeasts and yeast-like fungi were screened for their potential to produce volatile organic compounds (VOCs) active against Aspergillus flavus strains that produce aflatoxin B₁ (AFB₁). Five strains within four different genera showed greater than 50% growth inhibition of some strains of A. flavus. These were Anthracocystis sp. DMKU-PAL124, Aureobasidium sp. DMKU-PAL120, Aureobasidium sp. DMKU-PAL144, Rhodotorula sp. DMKU-PAL99, and Solicococcus keelungensis DMKU-PAL84. VOCs produced by these microorganisms ranged from 4 to 14 compounds and included alcohols, alkenes, aromatics, esters and furans. The major VOCs produced by the closely related Aureobasidium strains were found to bedistinct. Moreover, 2-phenylethanol was the most abundant compound generated by Aureobasidium sp. DMKU-PAL120, while methyl benzeneacetate was the major compound emitted from Aureobasidium sp. DMKU-PAL144. On the other hand, 2-methyl-1-butanol and 3-methyl-1-butanol were significant compounds produced by the other three genera. These antagonists apparently inhibited A. flavus sporulation and mycelial development. Additionally, the reduction of the AFB1 in the fungal-contaminated rice grains was observed after co-incubation with these VOC-producing strains and ranged from 37.7 ± 8.3% to 60.3 ± 3.4%. Our findings suggest that these same microorganisms are promising biological control agents for use against aflatoxin-producing fungi in rice and other agricultural products.

• Safety and Health at Work
• /
• 제15권1호
• /
• pp.33-41
• /
• 2024

Background: Dust generated during the processing of building materials enterprises can pose a serious health risk. The study aimed to compare and analyze the results of ART and the Monte Carlo model for the dust exposure assessment in building materials enterprises, to derive the application scope of the two models. Methods: First, ART and the Monte Carlo model were used to assess the exposure to dust in each of the 15 building materials enterprises. Then, a comparative analysis of the exposure assessment results was conducted. Finally, the model factors were analyzed using correlation analysis and the scope of application of the models was determined. Results: The results show that ART is mainly influenced by four factors, namely, localized controls, segregation, dispersion, surface contamination, and fugitive emissions, and applies to scenarios where the workplace information of the building materials enterprises is specific and the average dust concentration is greater than or equal to 1.5 mg/m³. The Monte Carlo model is mainly influenced by the dust concentration in the workplace of building materials enterprises and is suitable for scenarios where the dust concentration in the workplace of the building materials enterprises is relatively uniform and the average dust concentration is less than or equal to 6mg/m³. Conclusion: ART is most accurate when workplace information is specific and average dust concentration is > 1.5 mg/m³; whereas, The Monte Carlo model is the best when dust concentration is homogeneous and average dust concentration is < 6 mg/m³.

• 미생물학회지
• /
• 제41권3호
• /
• pp.216-224
• /
• 2005

혈장분획제제 중 혈액응공인자제제와 일부 면역글로불린제제는 혈장에 존재하는 다양한 단백질로부터 유효한 단백성분만을 선택적으로 분리 정제하기 위해 크로마토그래피 방법을 사용하여 생산된다. 효율적인 세척(cleaning) 공정이 이루어지지 않는다면 크로마토그래피는 다양한 종류의 불순물뿐만 아니라 혈액 중 내재 또는 오염 가능성이 있는 위해인자가 오염될 가능성이 있다. 본 연구에서는 혈장분획제제 제조공정에 사용되는 크로마토그래피의 세척 공정에서 혈장유래 바이러스의 제거 및 불활화 공정의 검토 강화로 혈장분획제제의 안전성을 확보하기 위해 크로마토그래피 세척 검증 시스템을 구축하고자 하였다. 크로마토그래피 세척 공정 중 바이러스 제거 검증을 위해 혈장유래 바이러스 중 물리${\cdot}$화학적 처리에 가장 큰 저항성을 갖는 human parvovirus B19의 모델 바이러스의 porcine parvovirus(PPV)를 대상으로 real-time PCR 정량법을 확립하였다. PPV에 특이적인 primer를 선별하였으며 형광염료 SYBR Green I을 사용하여 PPV DNA를 정량하였다. 세포배양법에 의한 감염 역가와 비교한 결과 PCR 민감도는 1.5 $TCID_{50}/ml$이었다. 확립된 검증법의 신뢰성(reliability)을 보증하기 위해 실험법의 특이성(specificity), 재현성(reproducibility) 등을 검증하였다. 구축된 검증시스템을 thrombin 분리${\cdot}$정제를 위한 SP-Sepharose 양이온 크로마토그래피 공정과 factor VIII 분리${\cdot}$정제를 위한 Q-Sepharose 음이온 크로마토그래피 공정에 적용하여 크로마토그래피 세척 검증을 실시하고, 세척 검증 시스템의 적합성을 확인하였다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 총회 및 춘계학술발표회
• /
• pp.98-103
• /
• 2001

부산 석대 생활폐기물 매립지의 환경오염 특성을 파악하기 위해 매립장 지역의 가스발생량 측정, 침출수 및 토양시료 채취, 지구통계학적, 수리지질학적 및 지구화학적 분석과 실내 주상시험을 실시하여, 침출수의 오염 부하량과 가스발생량, 가스의 농도와 지반 침하, 지질매체의 특성, 침출수의 오염 부하량과 가스발생량, 가스의 농도와 지반 침하, 지질매체의 특성, 침출수의 이동 및 확산의 관계를 고찰하였다. 그리고 물수지분석을 통하여 침출수의 발생량과 오염 부하량을 선정하였다. 매립장 A지구로부터 36개 가스정에서 획득한 가스자료를 $O_2$C $H_4$ $H_2$S, CO의 4가지 성분에 대해 지구통계학적 기법으로 분석한 결과, 다른 지점에 비해 가스의 농도가 높은 지점 주변에서 부분적으로 지반 침하가 발생하는 것으로 나타났다. Leachate-1, 2, 3에서 채취한 침출수의 화학적 분석 결과, 전기전도도와 Total Alkalinity는 높게 나타났으나, Cl, Cr, Mn, Cu, Zn, Cd, Pb 등이 과거보다 감소하였고, 수질유형은 삼각다이아그램에서 Na-HC $O_3$형으로 나타난다. Leachate-1, 2, 3에서 채취한 침출수의 화학적 분석 결과 전기전도도와 Total Alkalinity는 다이아그램에서 Na-HC $O_3$형으로 나타난다. 수질분석 결과에 의하면 생활폐기물의 생분해가 아직도 계속해서 활발히 진행되고 있는 것으로 판단된다. 물수지분석 결과, 순수하게 지하로 침투하는 침출수량은 약 465.11㎥/day이고, Cl, Mn, Fe의 순수오염 부하량은 각각 223.8kg/day, 0.2kg/day, 0.3kg/day로 추정된다. 매질에 대한 실내 주상시험에서 기반암 풍화토와 매립토에 대한 선형유속(equation omitted)은 각각 0.206cm, 0.019cm, 확산계수( $D_{ι}$)는 각각 0.234$\textrm{cm}^2$/min, 0.118$\textrm{cm}^2$/min, 종분산 지수 ($\alpha$$_{ι}$)는 각각 1.136cm, 0.095cm로 복토재로 사용된 매립토보다 기반암풍화토가 오염물질의 확산속도가 더 큰 것으로 나타났다.