• Korean Journal of Soil Science and Fertilizer
• /
• 제45권4호
• /
• pp.565-571
• /
• 2012

This study was conducted to investigate the tolerance of some resistant fungal strains from soils contaminated with heavy metals. Various fungal strains were isolated from soil samples collected from studied sites which heavy metals and other pollutants have been emitted in effluents for several years. Fungi isolated belong to different genera; however, Penicillium spp. showed the most frequent species. The microbial number was remarkably higher in the control soil than contaminated soil samples collected from mining areas. $Pb^{2+}$ and $Zn^{2+}$ had the highest concentration in the polluted soils ranging from 89 - 3,521 ppm and 98 - 4,383 ppm, respectively. The minimum inhibition concentrations (MICs) of $Pb^{+2}$ and $Zn^{+2}$ showed the highest values against the fungal strains. $Ni^{+2}$ and $Co^{+2}$ were the lowest contaminants in the polluted soils with the concentration of 5 to 12.1 ppm and 1.8 to 4.8 ppm, respectively. The tested resistant strains showed the strongest inhibition for $Ni^{+2}$ and $Co^{+2}$ up to 200-400 ppm. Cadmium was the most highly toxic heavy metal for most of strains, however, 1 mM of $Cr^{3+}$, $Cu^{2+}$ and $Pb^{2+}$ accelerated the growth of Penicillium verrucosum KNU3. $Cu^{+2}$ and $Zn^{+2}$ at concentration of 1 mM did not affect the growth rate P. funiculosum KNU4. Tolerance of fungal species to heavy metals appears to be strain and origin dependent.

• Biomolecules & Therapeutics
• /
• 제13권1호
• /
• pp.13-19
• /
• 2005

The study was undertaken to determine the antagonism of the AP1700 on the development of nalbuphine-induced tolerance and physical dependence. AP1700 is an oriental drug preparationcomposed of 5 natural products and is known to have antinarcotic action with an oral dose of 250 mg/kg in rats. AP1700 significantly inhibits the development of antinarcotic action with an oral dose of 250 mg/kg in rats. AP1700 significantly inhibits the development of nalbuphine-induced physical dependence but does not the tolerance. Mitogen-activated protein kinase, which include extracellular signal-regulated kinase (ERK), p38 and c-Jun N-terminal kinase (JNK)/stress-activated protein kinase (SAPK) play critical roles in cell growth and survival and drug abuse. The level of pCREB was elevated in the hippocampus by the chronic treatment with nalbuphine, however, the elevation of pCREB was not inhibited by the AP1700 co-treatment. Interestingly, the level of pERK was decreased in the co-treatment with nalbuphine and AP1700 on the cortex and striatum. However, the level of nNOS and NR1 was not modulated by the treatment with nalbuphine or AP1700 on the cortex, hippocampus and striatum in the rat brain. These results suggest that the AP1700 could be used to ameliorate the nalbuphine withdrawal symptoms.

• Journal of the Microelectronics and Packaging Society
• /
• 제7권1호
• /
• pp.13-18
• /
• 2000

Low temperature co-fired ceramics on metal (LTCC-M) is efficient for embedding passive components with good tolerance in a module due to the dimensional stability in x and y directions by the constraint of metal core during the firing. In addition, the radiation noise can be reduced by metal core. In this paper, embedded passive components were introduced and a power amplifier module (PAM) fabricated by using the passive components was explained. The embedded passive components in test patters showed the tolerance of 10~20% and the good repeatability in tolerance of embedded passives was maintained in module fabrication. The shortened traces in multi chip modules (MCMs) make the signal delay time decreased and the embedded passives simplify the packaging processes owing to the less solder points, which enhance the electrical performance and increase the reliability of the modules. The LTCC-M technology is one of the promising candidates for RF application and is expected to expand its applications to power and high performance devices.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• 제48권1호
• /
• pp.20-24
• /
• 2003

Proline is known as an osmotrotectant to enhance tolerance against both salt and dehydration stresses. A P5CS ($\Delta^1$-pyrroline-5-carboxylate synthetase) plays a major role in regulation of synthesis of proline. An overexpression of the mothbean P5CS gene in transgenic tobacco plant increased the levels of proline and osmotolerance. In an attempt to look for the possibility to use content of proline as well as a level of P5CS gene expression as molecular markers for salt tolerance, the amounts of proline and transcript levels of P5CS were measured as functions of either concentration of NaCl or length of treatment period among different species of zoysiagrass. Hybridzoysia showed the highest level of proline ($329\mu\textrm{g}$/g.f.w.) among five different species of zoysiagrass at 250 mM NaCl in 24 hours. The level of P5CS transcript was also the highest in the hybridzoysia at 250 mM NaCl in 24 hours. The transcriptions of P5CS gene were induced at the rates of 1.2, 1.2, 1.8, and 1.8, upon treatment of 250 mM NaCl in Z. japonica, Z. matrella, Z. sinica and hybridzoysia respectively. Based on a correlation between the level of P5CS transcript and the proline content among different species of zoysiagrass, a comparative structural analysis of the gene for P5CS from either Z. sinica or hybridzoysia may lead to an understanding of mechanism for salt tolerance shown differently among zoysiagrasses.

• Korean Journal of Clinical Laboratory Science
• /
• 제42권3호
• /
• pp.125-128
• /
• 2010

HbA1c test measures the amount of glycated hemoglobin in blood. HbA1c shows the average of blood glucose levels for the past three months, this is a better indicator of how overall diabetes is doing. HbA1c gives a much better idea of how the body is breaking down the glucose. Therefore, this HbA1c is very important tool for maintaining normal glucose levels for pre-and diabetic patients. Total 408 participants were tested HbA1c voluntarily from Chosunilbo Health Expo (8th~11th, July 2010). Through this small-scaled direct HbA1c, about 54.7% (207 out of 408) was shown glucose tolerance and diabetes. However, 61 from 157 participants who were shown under 6.9% HbA1c (normal and pre-diabetic stage) are taking only antidiabetic drugs to maintain a normal blood glucose. Regular HbA1c test can bring an important management and awareness about controlling blood sugar level and prevention of diabetic complications.

• Journal of Climate Change Research
• /
• 제8권3호
• /
• pp.257-264
• /
• 2017

Carbon capture and storage (CCS) technology has been suggested as an ultimate strategy for mitigating climate change. However, potential leakage of $CO_2$ from the CCS facilities could lead to serious damage to environment. Plants can be a bio-indicator for $CO_2$ leakage as a cost-effective way, although plants' responses vary with plant species. In this study, a greenhouse experiment was conducted to investigate the relation between the $CO_2$ tolerance of corn species and the initial physiological responses to the elevated soil $CO_2$ concentration. Treatment groups included CI (99.99% $CO_2$ gas injection) and BI (no gas injection). Mean soil $CO_2$ concentration for the CI treatment was 19.5~39.4%, and mean $O_2$ concentration was 6.6~18.4%. The soil gas concentrations in the BI treatment were at the ambient levels. In the CI treatment, chlorophyll content was not decreased until the $13^{th}$ day of the $CO_2$ injection. On the $15^{th}$ day, leaf starch content and stomatal conductance were increased by 89% and 25% in the CI treatment compared to the BI treatment, respectively. This might be due to the compensatory reaction of corn to avoid high soil $CO_2$ stress. However, the prolonged $CO_2$ injection decreased chlorophyll content after 13 days. After $CO_2$ injection, plant biomass was reduced by 25% in the CI treatment compared to the BI treatment. Due to the inhibited root growth, leaf phosphorous and potassium contents were decreased by 54% on average in the CI treatment. This study indicates that corn has a high tolerance to soil $CO_2$ concentration of 30% for 2 weeks by its compensatory reactions such as an maintenance of chlorophyll content and an increase in stomatal conductance.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• 제45권4호
• /
• pp.72-77
• /
• 2008

This paper investgated on fabrication process and tolerance of resistance body with a uniform thickness formed by the process of cavity type on organic substrate for application of embedded resistor. To improve the tolerance of resistance value according to a position of PCB cause by conventional screen printing, we introduced the process of cavity type from organic substrate. A resistor with a desired shape and volume was precisely formed by the process of cavity using a resistor paste and screen printing. This method can increase PCB's productivity by shortening its production time because process conditions of a screen prining device can be set quickly without any affection on its position accuracy.

• Journal of Electrical Engineering and Technology
• /
• 제12권6호
• /
• pp.2118-2126
• /
• 2017

The large-scale power system blackouts have indicated that conventional protection relays that based on local signals cannot fit for modern power grids with complicated setting or heavily loaded-flow transfer. In order to accurately detect various faulted lines and improve the fault-tolerance of wide-area protection, a novel multi-section weighed fault matching and detecting algorithm is proposed. The real protection vector (RPV) and expected section protection vectors (ESPVs) for five fault sections are constructed respectively. The function of multi-section weighed fault matching is established to calculate the section fault matching degrees between RPV and five ESPVs. Then the fault degree of protected line based on five section fault degrees can be obtained. Two fault detecting criterions are given to support the higher accuracy rate of detecting fault. With the enumerating method, the simulation tests illustrate the correctness and fault-tolerance of proposed algorithm. It can reach the target of 100% accuracy rate under 5 bits error of wide-area protections. The influence factors of fault-tolerance are analyzed, which include the choosing of wide-area protections, as well as the topological structures of power grid and fault threshold.

• Korean Journal of Soil Science and Fertilizer
• /
• 제49권6호
• /
• pp.776-782
• /
• 2016

Salinity has been a threat to agriculture in some parts of the world; and recently, the threat has grown. Plant growth-promoting rhizobacteria (PGPR) may benefit plant growth, either by improving plant nutrition or producing plant growth hormones. The effects of rhizobacterial strains to attenuate the salinity stress on the germination of Chinese cabbage seeds were tested using four different concentrations of NaCl (50, 100, 150, and 200 mM). Also, PGPR strains were tested to enhance the early germination of Chinese cabbage seeds under normal conditions. Azotobacter chroococcum performed best with enhancing the radicle length of 4.0, 1.2, and 1.0 times at treatments of 50, 100, and 150 mM of NaCl, respectively. Additionally, significant differences were found in plumule length, A. chroococcum and Lactobacillus sp. showed remarkable activation either in normal or under stress conditions. Co-inoculation by three rhizobacterial strains (LAPmix) indicated synergistic effect to enhance the early germination of the seeds. The results of this study are promising for application of rhizobacterial strains that possess plant growth promoting traits to enhance the plant tolerance against salinity.

• Journal of Korean Institute of Industrial Engineers
• /
• 제29권1호
• /
• pp.21-31
• /
• 2003

Determination of operational dimensions and tolerances is complex if there exist inconsistencies between operational and design specifications. Dimension and tolerance charts (D&T charts) have been used to establish the relationships among operational dimensions in complex machining. This chart proves that individual operations can be harmonized when they are interconnected. However, it is hard to generate the chart manually. Because operational dimensions and tolerances must meet the design specifications, the dimensions and tolerances of interconnected operations have to be verified serially for economical operations. In this paper, the chart is automatically generated from the interconnected operations. More importantly, all operational dimensions and tolerances displayed in the chart have been verified by using LP to meet the design specifications. Finally, the chart is converted to an operational routing sheet that contains a detailed process plan along with cutting speed, feed rate, and operational references based on material hardness, surface finish, and tool nose radius.