• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.1
• /
• pp.67-75
• /
• 2010

Submarine and deep sea diving structures are generally designed based on their ultimate strength. Fatigue strength at welded joint must be also taken into account because working stress is increased due to the increasing of diving depth and using high yield steel. The pressure hulls of submarine are subjected to fluctuating compressive loading. But in addition to the calculated stresses, high residual tensile stresses at welded part have to be considered. The state of stress level of pressure hull is tensile at surface and compressive at deep diving depth. This paper presents the results of an experimental investigation on the crack initiation and growth at the weld toe of T welded joints of HY-100 steel plate under constant amplitude loading. It is also investigated the phenomenon of the fatigue failure and test methods. Fatigue tests have been using real scaled local structural models of full penetration T-welded joint, which is a part of the cylindrical shell structures reinforced by ring stiffeners. Several load ratios under constant amplitude loading are considered in the tests. Crack initiation and growth characteristics are examined based on the beach marks of the cracked section of the test specimens. A design stress-life curve including the design formula is suggested according to tested data.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.22 no.1
• /
• pp.25-28
• /
• 2011

The virulence against the two-spotted spider mite, Tetranychus urticae Koch, was evaluated with entomopathogenic fungus Paecilomyces lilacinus (Thom) Samson HY-4 which is isolated from coleopteran insect and registered to Korean and US patents. Virulence tests were conducted with conidial suspensions ($1.5{\times}10^6conidia/ml$) of P. lilacinus HY-4 against T. urticae adults and positive results were recorded in laboratory conditions. The spraying device was also developed for the efficient and exact evaluation of treatment. The developed spraying device was named as SD-tower sprayer and its efficacy of spraying conidia was evaluated. The accumulated mortality caused by P. lilacinus HY-4 using SD-tower spray was about 73% at 6 days after inoculation. This suggest that the isolate P. lilacinus HY-4 may be considered as promising for a new approach to prevent adult infestations by T. urticae.

• Journal of Dairy Science and Biotechnology
• /
• v.36 no.4
• /
• pp.220-225
• /
• 2018

The purpose of this study was to investigate the effect of ultrasonic treatment during probiotics production process on the shelf life and the survival rate. Once Lactobacillus plantarum and Bifidobacterium longum were cultured in edible culture medium, ultrasonic treatment was performed at 100 Hz for 1, 2, 5, 7, and 10 minutes. Ultrasonic-treated L. plantarum HY7715 and B. longum HY8001 were centrifuged, mixed with a cryoprotectant, and lyophilized. The prepared lactic acid bacteria powder was individually packaged. After 6 months, viable cell counts were measured separately under cold storage and room temperature. In vitro digestion experiments were performed to determine the survival rate at digestive tract. As a result, it was observed that shelf life and survival rate were increased compared to untreated control group.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1972-1977
• /
• 2005

In this work, an inverse dynamic control method is developed to enhance tracking performance of industrial robots, which effectively deal with the nonlinear dynamic interferential forces. In general, the DFF (Dynamic Feed-Forward) controller and the CTM (Computed-Torque Method) controller are used for dynamic control for industrial robots. We study on the practical issues for implementing these inverse dynamic controllers via simulations and experiments. We develop the dynamic models in two different ways. One is a model designed through Newton-Euler method for real time computation and the other is a model designed through SimMechanics for evaluating the developed controller via simulations. We evaluate the nominal performance and robustness of the controller via simulations and experiments using serial 4-DOF HyRoHILS (Hyundai Robot Hardware-In-the-Loop Simulation) system. The results show that the inverse dynamic controller is effective and practically useful for a real control structure.

• Journal of Environmental Impact Assessment
• /
• v.21 no.1
• /
• pp.105-117
• /
• 2012

Future climate according to land-use change was simulated by regional climate model. The goal of study was to predict the distribution of meteorological elements using the Weather Research & Forecasting Model (WRF). The KME (Korea Ministry of Environment) medium-category land-use classification was used as dominant vegetation types. Meteorological modeling requires higher and more sophisticated land-use and initialization data. The WRF model simulations with HyTAG land-use indicated certain change in potential vegetation distribution in the future (2086-2088). Compared to the past (1986-1988) distribution, coniferous forest area was decreased in metropolitan and areas with complex terrain. The research shows a possibility to simulate regional climate with high resolution. As a result, the future climate was predicted to $4.5^{\circ}$ which was $0.5^{\circ}$ higher than prediction by Meteorological Administration. To improve future prediction of regional area, regional climate model with HyTAG as well as high resolution initial values such as urban growth and CO2 flux simulation would be desirable.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.39 no.4
• /
• pp.329-335
• /
• 2013

Three-dimensional quantitative structure-activity relationships (3D-QSARs) models between the substituents with changing groups ($R_1$ & $R_2$) of 4-hydroxybenzyl alcohol (4-HBA) derivatives as substrate molecule and their inhibitory activities against tyrosinase were derived and discussed quantitatively. The optimized CoMSIA FF model showed the best predictability and fitness ($r^2$ = 0.858 & $q^2$ = 0.951). The contour maps of the optimized CoMSIA FF model showed that, the inhibitory activities of the analogues against tyrosinase were expected to increase when hydrophobic (Hy) favor, negative charge (E) favor, steric (S) disfavor and hydrogen bond donor (HD) disfavor groups were substituted at the $R_2$ position. When the hydrogen bond donor (HD) favor groups were substituted at the $R_1$ position, it is predicted that the substituents will be able to increase the inhibitory activity.

• Korean Journal of Poultry Science
• /
• v.36 no.2
• /
• pp.149-155
• /
• 2009

The present study was conducted to compare the carcass yields and meat characteristics of three types of commercial male chicks White mini broilers, Ross broilers and Hy-Line brown chicks under the identical feeding condition. One-hundred 1-d chicks of each type were randomly placed into four pens per group (25 chicks per pen) and fed corn-soybean meal based commercial diets for 35d, 18d or 49d, respectively. At the end of the feeding trial, the birds were sacrificed and subjected to carcass measurements. The dressing percentages of White mini broilers and Ross broilers were significantly higher (P<0.05) than that of Hy-Line brown cockerels. The rate of breast meat of Hy-Line brown cockerels was significantly lower (P<0.05) than those of White mini broilers and Ross broilers. However, Hy-Line brown cockerels showed higher (P<0.05) leg meats than the others. There were no significant differences in serum total cholesterol and the activities of glutamic-oxaloacetic transaminase and glutamic-pyruvic transaminase among the groups. The breast meats of White mini broilers presented highest lightness value. The yellowness of breast and redness of leg meats of White mini broilers and Ross broilers were significantly higher (P<0.05) than those of Hy-Line brown cockerels. There were no significant differences in the SOD-like activity and change of pH in edible meats among the groups. The meat color in White mini broilers was significantly higher than that of Hy-Line brown cockerels. No significant differences were observed in term of flavor, tenderness and overall acceptability. In conclusion, the physico-chemical properties and sensory characteristics of edible meats were not greatly affected by genotype if they were similar body weights and kept under the identical feeding condition. But the Hy-Line brown cockerels were less desirable as a meat-type strain due to lower carcass yields and inferior growth and feed conversion ratio.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.39-39
• /
• 2009

고강도강의 용접성은 저온균열 저항성으로 대변되는데, TMCP강과 HSLA강 등이 개발되면서 고강도강의 저온균열저항성이 크게 향상되어 무예열 용접성이 확보되었다. 그러나 용접재료 측면에서는 그에 상응하는 재료의 개발이 지연되어 용착금속부에서의 저온균열이 심각한 문제로 대두되고 있는 실정이다. 이러한 문제는 800 MPa급인 HY-100강재를 HSLA-100강으로 대체하는 과정에서 현실적인 문제로 제기 되었다. 즉 HSLA강은 용접 예열이 필요치 않았으나 기존의 용접재료, 즉 HY-100 강재에 사용하던 용접재료를 사용하게 되면 용착금속부에서 저온균열이 발생하여 용접예열을 생략할 수 없다는 판단에 이르게 되었던 것이다. 이에 본 연구의 목적은 HSLA-100강을 무예열 용접할 수 있는 GMA 용접와이어 개발하는 것이며, 구체적인 개발 목표는 무예열 용접조건에서 800 MPa 이상의 인장강도를 가지며 $-50^{\circ}C$에서의 충격인성이 50 J 이상인 GMA 용접와이어 개발하는 것이다. 이러한 용접재료를 합금설계함에 있어 무예열 용접성을 확보하기 위하여 용접재료의 탄소함량을 0.01% 수준으로 하고, 용착금속의 인장강도와 저온 충격치에 미치는 Mn과 Mo 함량의 영향을 검토하고 각각의 조성을 실험계획법으로 확정하였다. 그리고 확산성수소량에 따른 저온균열 발생 여부를 확인하여 무예열용접성을 확보하기 위해서는 확산성수소량이 3ml/100g 이하가 되어야 한다는 사실을 실험적으로 확인하였다. 그리고 이를 달성하기 위해서는 원자재인 와이어로드의 표면 품질이 중요하다는 사실도 확인할 수 있었다. 다음으로는 실험계획법에 의거하여 선정된 합금조성의 신뢰성을 검증하기 위하여 800kg 중량의 시제품을 생산하였으며, 생산된 시제품에 대해서는 실험계획법에서 사용한 Ar+5%CO2외에도 Ar+20%CO2를 적용하여 보호가스의 영향을 검토하였다. 검토 과정에서 Ar+20%CO2용으로 사용하기 위해서는 용접재료의 Si 및 Mn 함량이 상향조정되어야 함을 확인할 수 있었다. 그리고 탄소함량을 0.05% 수준으로 증가시키면 Mo 함량을 크게 저하시킬 수 있음도 확인할 수 있었다. 이러한 과정을 거쳐 개발된 GMA 용접재료는 무예열 용접조건에서 저온균열이 발생하지 않았으며, 인장강도는 830 MPa이었으며 $-50^{\circ}C$에서의 충격치는 90 J 이상이었다.

• Korean Journal of Poultry Science
• /
• v.38 no.2
• /
• pp.113-119
• /
• 2011

This study was conducted to compare the quality of Chuncheon Dakgalbi made with meat from three chicken breeds. Ross male broilers, Hy-Line Brown male chicks and White Mini male broilers were raised for 18 d, 49 d and 35 d, respectively, and slaughtered. The thigh meat from carcasses on each breed were used for this experimented. The fat content was higher in White Mini broiler meat than Ross broiler and HY-LINE BROWn chick meat (P<0.05). No differences were observed in aroma patterns of raw meat and Chuncheon Dakgalbi between all breeds. The Chuncheon Dakgalbi made with White mini broiler meat had higher color stability and lipid oxidation stability and showed higher sensory scores such as visual color and overall acceptability. Therefore, the Chuncheon Dakgalbi made with White Mini broiler meat showed the best quality among the three chicken breeds.

• Journal of Microbiology
• /
• v.45 no.5
• /
• pp.409-417
• /
• 2007

Burkholderia sp. HY-10 isolated from the digestive tracts of the longicorn beetle, Prionus insularis, produced an extracellular lipase with a molecular weight of 33.5 kDa estimated by SDS-PAGE. The lipase was purified from the culture supernatant to near electrophoretic homogenity by a one-step adsorption-desorption procedure using a polypropylene matrix followed by a concentration step. The purified lipase exhibited highest activities at pH 8.5 and $60^{\circ}C$. A broad range of lipase substrates, from $C_4\;to\;C_{18}$ p-nitrophenyl esters, were hydrolyzed efficiently by the lipase. The most efficient substrate was p-nitrophenyl caproate ($C_6$). A 2485 bp DNA fragment was isolated by PCR amplification and chromosomal walking which encoded two polypeptides of 364 and 346 amino acids, identified as a lipase and a lipase foldase, respectively. The N-terminal amino acid sequence of the purified lipase and nucleotide sequence analysis predicted that the precursor lipase was proteolytically modified through the secretion step and produced a catalytically active 33.5 kDa protein. The deduced amino acid sequence for the lipase shared extensive similarity with those of the lipase family 1.2 of lipases from other bacteria. The deduced amino acid sequence contained two Cystein residues forming a disulfide bond in the molecule and three, well-conserved amino acid residues, $Ser^{131},\;His^{330},\;and\;Asp^{308}$, which composed the catalytic triad of the enzyme.