• Journal of the Korean Society of Clothing and Textiles
• /
• v.11 no.1
• /
• pp.11-19
• /
• 1987

The objectives of this study were: 1. To investigate the relationship between arm movement and clothing pressure in the upper arm and shoulder blade area. 2. To find out the relationship between ease of basic pattern and clothing pressure in the upper arm and shoulder blade area. 3. To study any interaction between arm movement and ease of clothing on the clothing pressure. This study was an experimental research using the measuring devices of clothing pressure. The subjects were the unmarried college women. Arm movements were 3 types($45^{\circ}$, $90^{\circ}$, $135^{\circ}$) to the horizontal direction. The ease of basic pattern in the breast was 3 types(4 cm, 6 cm, 8cm). The statistical analyses used in this study included mean, standard deviation and one-way analysis of variance. The results obtained from this research were as follows; 1. The whole clothing pressure increased as the angle of the arm movement increased. Part of upperarm and shoulder blade above axillar gave high clothing pressure while part of upperarm and shoulder blade above upper breast, low pressure. Difference between highest clothing pressure and lowest clothing pressure increased as the arm movementdid. 2. The whole clothing pressure increased as the ease of the basic pattern in breast decreased. No matter how the ease of basic pattern in the breast area varied, the Points where generally showed high and low pressure were identical. 3. The whole arm pressure increased as the movement angle increased and the ease of pattern in breast area decreased. Difference between highest clothing pressure and lowest clothing pressure increased as the movement angle increased and the ease decreased.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.8 s.145
• /
• pp.1168-1175
• /
• 2005

Clothing pressure has close relation with clothing comfort and depends on the pattern and properties of textile fabrics. Choosing a suitable clothing pressure is an essential factor for designing functional clothing such as the foundation for reshaping of a body contour or medical items for bum patient, and etc. However, it is hard to measure pressure values at the curved surface of a human body correctly. Recently, an air pack type pressure sensor, which has relatively excellent performance has been used to measure clothing pressure, however, it is still inconvenient to apply because it is a contact- type sensor. Therefore, in this paper, we suggest an indirect method that can measure clothing pressure without touching the subject by improving the equation of Kirk and Ibrahim (1966). However, confusions have been occurred when someone use the equation since the definition of parameters are somewhat vague. Furthermore, the estimated clothing pressure obtained by the previous method are quite different from the real values because this method does not consider the 3D effect of a human body and property changes of a transformed fabric. In this paper, the direction of principal stress and the radius of curvature in the principal direction were searched in the 3D image of the deformed girdle to get more accurate clothing pressure. The estimated clothing pressure was verified by comparing the result of the air pack type pressure sensor. It was found that the accuracy of the pressure estimation was improved by considering the 3D curvature of human body and the directional characteristics of textile fabrics.

• Korean Journal of Human Ecology
• /
• v.11 no.3
• /
• pp.307-319
• /
• 2002

We studied on the development of clothing pressure measurement system for wear comfort of foundations(girdle, brassiere, all-in-one). Measurements of clothing pressure were made on subjects wearing girdles, brassieres, all-in-ones of several type(material, size) using by CPMS(clothing pressure measurement system: Tech-Storm. Co). Wearing experiments have been carried out using nine women in the twenties and six women in the forties. The results obtained are as follows: 1. The clothing pressure applied by girdle was higher in the hard type than the soft type by $5-10gf/cm^2$, also recorded a high clothing pressure at points of waist band line and thigh lateral. 2. Clothing pressure of brassiere with wire was high at the point of underbust line and shoulder strap. Pressure for 40s showed higher than 20s by $6-7gf/cm^2$. 3. The pressures of abdominal part applied by both of girdle and all-in-one were much greater than those of girdle or all-in-one. 4. We demonstrated the adaptability and conformity of the CPMS by inquiring into the clothing pressure of various foundations.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.5
• /
• pp.723-740
• /
• 2022

This study aimed to develop an Arduino-based garment pressure device (APD) on the basis of using Single-Tact sensor by suggesting the reliable clothing pressure range and coefficient of selected sensors through the APD calibration process. Once the APD was validated, the pressure of the experimental men's lower body compression wears was measured using the APD and was compared to the pressure measured using the existing air-pack type pressure meter. The subjects were one mannequin and eight men in their 20's, and the trial compression wears were calf sleeves and pants. Clothing pressures were measured in hip, mid-thigh, calf, and ankle. In terms of the 99% confidence level, the experimental clothing pressure measured at the designated measuring points using the APD was considered identical to the one measured using an existing clothing pressure meter. Therefore, on the basis of the experiment results, this study demonstrated that the APD is as reliable as the existing clothing pressure meter within the pressure ranges of 0.54-16.79 kPa and 0.18-25.47 kPa as provided by the SingleTact sensor supplier's data on the basis of using an external ADC (Analog to Digital Converter) module.

• Korean Journal of Human Ecology
• /
• v.13 no.1
• /
• pp.153-158
• /
• 2004

With considerable development of comfortable and functional clothing in recent years, we need to evaluate the effects of garment pressure in daily wear on each parts of human body because the garment pressure is important to design the clothing. This study was designed to examine the effects of body postures on garment pressure on each parts of human body in the actual clothing conditions. All the data were collected from 50 volunteered subjects. The Garment pressure was measured in lune and December with 8 points CPMS clothing pressure system from scapular, upper am, elbow, under arm, front waist line, side waist line, abdomen, crista ilica, upper hip, middle hip, front thigh, back thigh, front knee and back knee. The postures of subjects were controlled with 3 positions such as standing (posture 1), sitting on the chair (posture 2), and sitting on the floor (posture 3) during measurement of clothing pressure. Clothing weights were more in men than in woman. It showed that clothing weights had no effects on the garment pressure. In this study, however, just the garment pressures on scapular and top of the hip increased significantly by clothing weight (p<. 05). Clothing horizontally pressed on scapular and top of hip but not on other parts. When subjects stood up, the garment pressure was the highest on the side waist. Especially, clothing pressure on the front waist point was lower than that of the left side waist. On the upper parts of the human body, the garment pressure of left side waist was the highest, and followed by front waist, crista ilica, and abdomen in order. When subjects were sitting on the chair, the garment pressure on the lower parts of the human body was the highest on the top of hip. When the subjects were sitting on the chair or on the floor, the surface area on their skin of hip and waist parts increased by postures. In addition, it showed that men felt more comfortable than women on higher clothing pressure level.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.5
• /
• pp.827-835
• /
• 2022

Clothing pressure is considered the essential factor affecting the comfort of clothing, so it is crucial that it is measured precisely. The purpose of this study is to construct a prototype using the Adafruit Flora as the Arduino system, which can be used as a wearable framework for easy, low-cost, and precise clothing pressure measurement. The study also aims to determine how best to conduct the procedure of sensor calibration. To optimize the accuracy of the sensors, the calibration procedure was implemented using mathematical methods that combined polynomial and exponential regression in a hybrid approach. The prototype can easily measure clothing pressure even during active movements, as seen in the detection of stable signals. In addition, since the system was specifically proposed as a wearable patch that can be easily attached and removed as necessary, it can also be used to standardize the value of clothing pressure in each movement.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.6
• /
• pp.1010-1021
• /
• 2017

Adjustment of clothing pressure for compression wear is critical to the physiological and psychological satisfaction of the wearer; however, there are limited studies on the practical relationship among extensibility of materials, pattern reduction of compression wear and resultant clothing pressure. This study provides consumers and designers with information on clothing pressure using a screening extensibility test suggested by Ziegert and Keil (1988) even for the final products. As the first step, ten commercial products were collected and their size, extensibility and corresponding clothing pressure were analyzed. It was found that clothing pressure around the waist level could be predicted well from the information of Ziegert and Keil's (1988) % extensibility of the material (Z stretch %) and the actual application of Z stretch amount to the pattern reduction rate (applied % of Z stretch), with an $r^2$ of around 0.80, especially at the waist level. However, it was not simple for the case of clothing pressure around the back of the chest level due to the various design variation and the complexity of the anatomical structure around the trapezius.

• Journal of Korean Living Environment System
• /
• v.24 no.4
• /
• pp.533-540
• /
• 2017

This study analyzes the stretchability and clothing pressure of fabrics made from stretchy knit materials, and uses the baseline data to develop various functional clothing made from stretchy knit fabrics. To observe the changes in the stretchability and clothing pressure, we observed the compatibility of the two materials (tricot and power-net), presence of flat seam, fabric layering, and flat seam direction as key variables. A standard test method for stretch properties (ASTM D2594) was used for measuring the stretchability of the material. Clothing pressure measurements were analyzed in terms of the mean and standard deviation values, and the correlation of the stretchability. In the case of tricot, the presence of flat seam increased the stretchability of the fabric regardless of the fabric layering. However, when tricot and the less stretchable power-net were combined, the presence of flat seam did not increase the stretchability. Flat seam did not interfere with or limit the stretchability of the fabric, but they did increase the clothing pressure at the seam. The stretchability had a negative correlation with the clothing pressure except along the flat seam.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.11 s.158
• /
• pp.1531-1537
• /
• 2006

This study was conducted to investigate the relation between clothing pressure and subjective sensation exerted by foundation. Nineteen females volunteered as subjects. Experimental foundations were brassiere with 70B, 70C, 75B and 75C size which were widely distributed in pilot test and two types of girdle of which size were 64, 70 and 76. Clothing pressure with an air pack system and subjective sensation were measured at 5 points in brassiere and 7 points in the girdle. As the result of this study, brassiere's band and girdle's waist line, of which clothing pressure are high, is needed to improve. Generally the more pressure makes the more tightness, however, in some regions more or less pressure can give comfort. The tightness rating may not only related to clothing pressure, but also related to factors such as body size, body fat, resilience of muscle and bone structure. Other subjective sensation such as tactile feeling, hot/wet feeling, etc. in addition to the study with consideration of these factors could be used in future research to evaluate the effectiveness of foundation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.3
• /
• pp.495-509
• /
• 2021

The study investigated the effects of five commercial body shaping foundation items on clothing pressure, blood flow, body shaping effectiveness, and wearer satisfaction for middle-aged women. The study measured clothing pressure at each of the 10 designated measurement points for twelve subjects wearing the foundations. Blood flow changes were recorded and body shaping effectiveness was analyzed by comparing differences in girth when wearing and not wearing the foundations. The subjects rated wearer comfort along a 7-point Likert scale. The results were that clothing pressure was present at all measurement points, and all foundations placed the least pressure on the anterior underbust girth. In addition, clothing pressure was high in the order of the lateral, posterior, and anterior areas. As clothing pressure increased, blood flow and velocity decreased and overall wearer satisfaction was assessed to be less comfortable. Body shaping effectiveness was evident across all the items, as all decreased girth measurements significantly. In conclusion, the appropriate level of clothing pressure provided by experimental foundations which is positive for blood flow and has an excellent body shaping effect was found to be between 0.53 and 1.77 kPa.