• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.1
• /
• pp.43-51
• /
• 2000

The response statistics of a hinged-clamped beam under broad-band random excitation is investigated. The random excitation is applied at the nodal point of the second mode. By using Galerkin's method the governing equation is reduced to a system of nonautonomous nonlinear ordinary differential equations. A method based upon the Markov vector approach is used to generate a general first-order differential equation in the dynamic moment of response coordinates. By means of the Gaussian and non-Gaussian closure methods the dynamic moment equations for the random responses of the system are reduced to a system of autonomous ordinary differential equations. The case of two mode interaction is considered in order to compare it with the case of three mode interaction. The analytical results for two and three mode interactions are also compared with results obtained by Monte Carlo simulation.

• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.2
• /
• pp.141-147
• /
• 2000

The nonlinear response statistics of an autoparameteric system under broad-band random excitation is investigated. The specific system examined is a vibration absorber system with internal resonance, which is known to be a good model for a variety of engineering systems, including ship motions with nonlinear coupling between pitching and rolling motions. The Fokker-Planck equations is used to generate a general first-order differential equation in the dynamic moment of response coordinates. By means of the Gaussian closure method the dynamic moment equations for the random responses of the system are reduced to a system of autonomous ordinary differential equations. The jump phenomenon was found by Gaussian closure method under random excitation.

• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.2
• /
• pp.133-139
• /
• 2001

The nonlinear response statistics of an spring-pendulum system with internal resonance under narrow band random excitation is investigated analytically- The center frequency of the filtered excitation is selected to be close to natural frequency of directly excited spring mode. The Fokker-Planck equations is used to generate a general first-order differential equation in the dynamic moment of response coordinates. By means of the Gaussian closure method the dynamic moment equations for the random responses of the system are reduced to a system of autonomous ordinary differential equations. The nonlinear phenomena, such as jump and multiple solutions, under narrow band random excitation were found by Gaussian closure method.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.3
• /
• pp.15-34
• /
• 2004

Diverse benefits such as reduction of fresh water consumption and effluent discharge, efficient use of raw materials and energy savings can be obtained by papermaking system closure. Closure of papermaking processes, however, causes many problems including reduction of the efficiency of additives, decrease of retention and dewatering, felt plugging, poor Paper quality, generation of slime and odor, poor vacuum efficiency, etc, and it has been recognized that accumulation of Inorganic and organic substances in the process white water is the prime cause of these problems. Therefore, technological developments for preventing accumulation of these detrimental substances are urgently required for Implementing papermaking system closure. Understanding of the accumulation phenomena of the inorganic and organic substances in the papermaking process white water is prerequisite for papermaking system closure. In this study a process simulation method was used to analyze the accumulation phenomena of anionic starch In the process white water as the closure level of a fine paper making process is increased. A pilot paper machine was used as a model process. Starch adsorption and desorption models were developed based on the concept of starch adsorption ratio, which was not considered in previous studies. Steady state simulation studies were carried out based on this model using a commercial simulator. In steady state simulation, the variation of dissolved starch concentration in each process unit was monitored as a function of white water usage for wire shower. The result of the steady state simulation showed that dissolved starch concentration and its increase ratio in Process units increased as white water usage ratio for wire shower increased.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04a
• /
• pp.26-26
• /
• 1999

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.04a
• /
• pp.150-158
• /
• 2000

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.113-114
• /
• 2000

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.160-164
• /
• 2007

In the steel industry, there is a need to produce large forged parts for the automobile industries, the flight and shipping industries ad military industries. In the steel-industry application, a cogging technique for cast ingots is required, because the major parts are needed as one large body in order to obtain higher quality. Therefore, cogging process is the primary step in manufacturing of practically large open-die forging. In the cogging process, internal voids have to be eliminated as defects, The present work is concerned with the elimination of the internal voids in large ingots so as obtain sound products. In this study, hot compression tests were carried out to obtain the flow stress of cast microstructure at different temperature and strain rates. The FEM analysis are performed to investigate the overlap defect of cast ingots during cogging stage. The measure flow stress data were used to simulate the cogging process of cast ingot using the practical material properties. Also the analysis of void closure are performed by using the $DEFORM^{TM}$-3D. The calculated results of void closure behavior are compared with the measured results before and after cogging, which are scanned by the X-ray scanner. From this result, the criteria for deformation amounts effect on the void closure can be investigated by the comparison of practical experiment and numerical analysis.

• The Research Journal of the Costume Culture
• /
• v.26 no.4
• /
• pp.632-648
• /
• 2018

This study aims to contribute to the development of sports wearables. It was conducted by a convergence team of professionals in the fashion industry, kinesiology and sports studies, and computer science and engineering. The purpose of the current study was to design and develop a fabric-type fitness band for a sensor to measure acceleration during jump rope exercises. Computer science and engineering professionals developed the Arduino board and sensor, kinesiology and sports studies provided the necessary exercise protocol, and the fashion industry professionals developed the band. First, a fitness band preference survey was completed by men and women between the ages of 20 and 50. Typical uses of the band included tracking exercise amount as measured by the number of steps taken and calories burned. Strap watch closure, a single color and achromatic color, and soft and smooth touch materials were preferred as band design. Second, two fabric-type fitness bands were designed and developed. Design 1 had a 3-dimensional pocket for the sensor, bright blue color, and stretch binding around the edges and for a loop. Design 2 had a flat pocket for the sensor, achromatic color, mesh binding around the edges and two metal loops. Both designs had Velcro as a closure. Third, wear testing of both bands with the sensor were conducted of 15 women in their 20s. They wore the bands during jump rope exercises. Both bands generally satisfied the participants. The Design 2 band was slightly more satisfying than the Design 1 band.

• Journal of Distribution Science
• /
• v.12 no.2
• /
• pp.73-79
• /
• 2014

Purpose - The Korean government has revised the distribution industry development law to regulate large-scale retailer operations to protecting medium- and small-scale retailers and traditional markets. According to the revised law, large-scale retailers must follow regulations on operating hours and compulsory store closures two days per month. Based on the revised distribution industry development law, most local governments regulate operation hours and they have adopted compulsory closure programs for large-scale retail stores. However, it is argued that fresh food producers suffer from a decrease in sales based on the compulsory closure of stores operated by large-scale retailers. Large-scale retailers reduce their fresh food orders from agricultural and fishery producers because of the compulsory store closures. Fresh food producers also suffer from a decrease in prices because reduced orders lead to a decrease in auction prices based on the availability of excess goods in wholesale markets. This paper investigates the effects of operation regulations for large-scale retailers on agricultural producers by surveying agricultural and fishery producer organizations. Research design, data, methodology - A survey was conducted on 117 producer organizations of fruits and vegetables, cereals, fisheries, and livestock products from September 10 to October 4, 2012. Survey items are annual sales, shares of sales accounted for by large-scale retailers, reduction of orders and prices from large-scale retailers, methods to deal with the sales reduction, unfair trade practices of large-scale retailers, opinion of the large-scale retailer regulations, and so on. The average sales of the sampled producer organizations are 13.7 billion won and the average share of sales accounted for by large-scale retailers is 35.4%. Results - Survey results show that the sample producer organizations' sales decreased 10.1% because of the compulsory closures of stores operated by large-scale retailers. It is estimated that the total sales of producer organizations decreased 371.2 billion won because of the regulations on the operation of large-scale retailers. In addition to the direct effect of a sales decrease due to order reduction, agricultural and fishery producer organizations suffered from the secondary effect of price reduction in wholesale markets. When orders from large-scale retailers decreased, most agricultural and fishery producer organizations shipped redundant products to wholesale markets, decreasing auction prices. It was estimated that the price received decreased 21.9% when sold in other marketing channels. As producer organization sales decreased, it was reported that the labor force employed by producer organizations also decreased by 15.1%. Therefore, we can conclude that the regulations for large-scale retailer operations resulted in negative impacts on agricultural producers. Conclusions - Although the sales reduction due to the regulations for large-scale retailer operations are not great, the cumulative effects due to the continued compulsory closure of stores operated by large-scale retailers could be great. This paper suggests governmental programs that could help agricultural producer organizations to find new and effective marketing channels such as direct marketing, farmers' markets, exports, Internet shopping, and so on.