• Ocean and Polar Research
• /
• 제30권4호
• /
• pp.497-507
• /
• 2008

With the reduction of tidal currents by the closing of the Saemangeun 4th dyke, sedimentary environments on the Gunsan tidal flat, the nearest inner flat from the 4th dyke, has been severely changed, which might affect macrobenthic assemblages on the habitats. In order to investigate changes in macrobenthic community structure on Gunsan tidal flat, field surveys were seasonally conducted at seven stations from April 2002 to November, 2005. Sedimentary facies on the study area were shifted into muddominant facies. The fine sediment has been greatly deposited on the tidal flat with accumulation of organic materials after closing the water passage of 4th dyke section. These drastic variations in environments gave rise to change in macrobenthic community structure. Since the closure of the 4th dyke, the number of species of macrobenthos has gradually decreased. And the filter feeders and sand-favored species such as Urothoe convexa, Macrophthalmus dilatatus, Umbonium thomasi, and Mactra veneriformis have been replaced by the deposit feeders such as Macrophthalmus japonicus and Ilyoplax pingi. MDS ordination based on Bray-Curtis similarity from forth-root transformed species abundance data showed that the macrobenthic communities have passed through three succession stages from 2002 to 2005. During the third stage of 2005 opportunistic species such as Prionospio japonica, Heteromastus filiformis and Sinocorophium sinensis increased in population on the tidal flat.

• 대한치과보철학회지
• /
• 제28권1호
• /
• pp.123-135
• /
• 1990

It would be of importance to determine the neutral Tone by a resultant axis of relation on relation to the mandible in understanding the biomechanics of the mandibular movement. In this study, the neutral zone at the habitual opening and closing mandibular movements is the shape of the paths described by a minimum moving point occured as an average center of the determined instantaneous centers of rotation. Twenty, aged $23{\sim}25$, male dental students without Temporomandibular disorders and with normal occlusion clinically were selected for the study. The habitual opening and closing mandibular movements were recorded by the Gnathorecouder and analyzed by the computer program of a planer rigid body model and the determined method of a minimum moving point. The results obtained from this study were as follows. 1. The minimum moving points were placed in the body of the mandible except two subjects. 2. The mean of maximum displacements of a minimum moving point was $0.62{\pm}0.08cm$ on X-axis and $0.73{\pm}0.16cm$ on y-axis. 3. The mean of maximum displacements of a minimum moving point was $3.39{\pm}0.62cm$ 4. The position and shape of the neutral zone were determined by the position, displacements, and moving distances of a minimum moving point.

• 대한치과보철학회지
• /
• 제45권1호
• /
• pp.119-130
• /
• 2007

Statement of problem: A few dry lubricants were applied to abutment screws for the improvement of joint stability. Purpose: The purpose of this study was to evaluate the surface change and fit of TiN-Coated abutment screw through the examination of tested screws in the field emission scanning electron microscope(FE-SEM;Netherland, Phillips co., model:XL 30 SFEG) after repeated closing and opening. Materials and method: Titanium(3i/implant Innovations Inc, USA) and Gold-Tite abutment screws(3i/implant Innovations Inc, USA) were selected for Group A and C respectively. TiN coated titanium abutment screws were also divided into two groups, Group B and D. Abutment screws of each group and the fit of abutment screw/implant fixture/abutment were observed on FE-SEM after repeated closing and opening test respectively. Results: 1. The abutment screws of TiN coated groups(Group B and D) showed more remarkable wear resistance in the threads of the screw than those of the other group(Group A and C). 2. There were more severe wear and defect of TiN coating in Group D tightened to 32 Ncm than Group B to 20 Ncm. 3. There was no difference in the fit of abutment screw/fixture/abutment among four groups, Group A, Group B, Group C and Group D. Conclusion: Under the conditions of this study, it is suggested that TiN coating of abutment screw be clinically acceptable and be expected to reduce the risk of abutment screw loosening. TiN coating of abutment screw showed good resistance against wear and the adequate fit of abutment screw/implant fixture/abutment.

• 대한방사선기술학회지:방사선기술과학
• /
• 제42권6호
• /
• pp.477-482
• /
• 2019

Recently, due to the increased use of medical radiation, the radiation exposure of radiation workers should be considered as well as medical exposure of patients. And it is recommended to close the door during radiography. however, In this study, when the door was inevitably opened for radiography, the proposed method was to install the shield as a method of reducing the exposure dose. And its efficiency was analyzed. In simple chest radiography, the measurement point was changed according to the measurement location. Dose rate were measured 10 times for each condition using a dosimeter. And the average value was derived. Using this, the change of dose according to the opening and closing of the door and the installation of the shield was analyzed. Using this, we compared and analyzed the dose change according to the door opening and closing and the installation of the shield, and significance was verified through the SPSS ver. 24. Depending on whether the door was opened or closed, 11,215.35%, 159.0%, 101.9% increased in front of the door in the consol room, behind the wall and behind the lead glass. Depending on the installing of the shield, the 49.2%, 29.6%, 19.9%, 30.6% decrease in front of the door in the examination and consol room, behind the wall and lead glass. In addition, statistical analysis was showed that there were significant differences in both the results according to whether the door was opened or closed and shielding(p<.05). Close the door during radiography. However, when the door should be opened, it was confirmed that the dose rate were reduced by installing the shield. Therefore, to optimize radiation protection, it is recommended to install shields when opening the door.

• 대한치과보철학회지
• /
• 제45권6호
• /
• pp.769-779
• /
• 2007

Statement of problem. When TiN coating is applied to the abutment screw, occurrence of greater preload and prevention of the screw loosening could be expected due to decrease of frictional resistance. However, the proper thickness of TiN coating on abutment screw has not been yet reported. Purpose. The purpose of this study is to find out the appropriate TiN coating thickness by evaluating the detorque force and the surface change of titanium abutment screw with various TiN coating thickness. Material and methods. 1. Material Thirty five non-coated abutment screws were prepared for TiN coating. TiN coatings were prepared by Arc ion plating method. Depending on the coating deposition time(CDT), experimental groups were divided into 6 groups(CDT 30min, 60min, 90min, 120min, 150min, 180min) and those of 1 group was not coated as a control group. Each group was made up of 5 abutment screws. 2. Methods FE-SEM(Field Emission Scanning Electron Microscoper) and EDX(Energy Dispersive X-ray Spectroscopy) were used to observe the surface of the abutment screw. Electric scales was used to measure the weight of the abutment screw after the repeated closing and opening of 10 trials. Detorque force was measured with digital torque gauge, at each trial. Results. 1. As the coating deposition time increased, the surface became more consistent and smooth. 2. As for the abutment screws that were TiN coated for more than 60 minutes, no surface change was found after the repeated closing and opening. 3. The TiN coated abutment screws showed less weight change than the non-coated abutment screws. 4. The TiN coated abutment screws showed higher mean detorque force than the noncoated abutment screws. 5. The abutment screw coated for 60 minutes showed the highest mean detorque force. Conclusion. The coating layer of proper thickness is demanded to obtain consistent and smooth coating surface, resistance to wear, and increased detorque force of the abutment screw. In conclusion, the coating deposition time of 60 minutes indicated improved mechanical property, when TiN coating was conducted on titanium abutment screw.

• PNF and Movement
• /
• 제14권3호
• /
• pp.237-244
• /
• 2016

Purpose: This case report examines the influence of proprioceptive neuromuscular facilitation (PNF) combined with a dynamic neuromuscular stabilization approach on balance in patients with cerebellar atrophy. Methods: The target subject of this case report was a 34-year-old woman who was informed of the purpose of this research and voluntarily agreed to participate in it. The case report conformed to research ethics based on the Helsinki Declaration. The target subject was confirmed to have cerebellar atrophy from an unknown cause in 2009 and was diagnosed with slight ataxia. At that time, she could carry out daily activities without physical therapy. On May 19, 2015, she suffered both a subdural hemorrhage (SDH) and subarachnoid hemorrhage (SAH) in a traffic accident. She was urgently moved to the emergency room and managed by nonsurgical treatment, and then, the cerebellar atrophy and ataxia gradually deteriorated. To evaluate the patient's balance capacity before and after intervention, the trunk impairment scale (TIS), trunk impairment scale (OLST) during eye-closing/opening, timed up and go test (TUG), and visual analogue scale (VAS) were conducted. The PNF intervention program was executed for 30 min, four times a week, for three weeks. Results: The TIS and OLST during eye-closing/opening were improved by as much as a point, by 8.15 s and 6.21 s, respectively, after applying the PNF program. TUG and VAS decreased by 1.33 s and 3 points, respectively, after intervention. According to the result, the OLST during eye-closing/opening and VAS improved remarkably in comparison with those before intervention. Conclusion: As the final result of the case report, PNF intervention combined with DNSA more effectively improved the static balance capacity, such as the OLST during eye-closing/opening and VAS, compared to the dynamic balance capacity. In addition, the intervention duration and period of the exercise program are recommended to be more than 1 h a day for four weeks considering the learning ability of a patient with cerebellar atrophy.

• 에너지공학
• /
• 제24권4호
• /
• pp.63-70
• /
• 2015

창문에서의 틈은 열 손실 뿐만 아니라 차음 성능에도 중대한 결함으로 작용되며, 특히 인체에 유해한 미세먼지 유입 경로로도 작용된다. 이러한 틈을 제거하기위해 많은 시도들이 이루어지고 있으나, 창문의 고유 기능인 이동특성으로 인해 해결하기 어려운 난제로 인식되어왔다. 본 연구는 이를 해결하기위해 수평 회전 휠과 곡선 레일을 적용한 새로운 유형의 미서기 창문을 제작하고, KS 시험 기준에 따라 사용성, 내구성, 기밀성능, 등의 성능 시험을 하였다. 시험 결과, 개폐력은 2000 N 중량의 창문에서 30 N, 개폐 반복성 시험에서는 100,000 cycles, 기밀성 시험에서는 10 Pa에서 $0.00m^3/(m^2h)$의 성능을 보여주었다. 상기 시험 결과, 새로운 구동 방식을 지닌 본 연구에서의 창문은 기밀성과 경제적 측면에서 새로운 접근 방식을 제시하고 있다.

• 대한치과보철학회지
• /
• 제24권1호
• /
• pp.117-124
• /
• 1986

경북대학교 치과대학에 재학중인 남자 17명, 여자 7명 총 24명을 연구대상으로 M.K.G의 sweep mode에 나타나는 저작운동을 분석한 바 다음과 같은 결과를 얻었다. 단일 저작회로의 기간은 $515{\pm}87msec.$ 이며, 이중 폐구 기간이 가장 길었고, 개구 기간, centric pause의 기간 순위였다. (P<0.005). 개구시 저작측으로 측방변위한 양은 $3.5{\pm}1mm$이었고, 비저작측으로 측방변위한 양은 $1.0{\pm}0.7mm$이었다. 개구시 최대 수직속도는 $120{\pm}28m/sec.$이며, 폐구시 최대 수직속도는 $109{\pm}21mm/sec.$로서 개구시의 최대 수직속도가 더 빠르게 나타났다. (P<0.05).

• 대한지리학회지
• /
• 제45권4호
• /
• pp.444-460
• /
• 2010

본 논문은 중부지방의 스키 리조트를 대상으로 제설조건을 파악하기 위하여, 스키장과 인접한 기상 관측지점의 기후자료를 이용하여 스키장 개장일과 폐장일, 제설작업에 영향을 미칠 수 있는 기후 요소의 변화를 분석하였다. 기후 조건이 불리한 수도권 스키리조트는 전체 제설작업 중 94% 이상이 팬형 제설기를 이용한 반면에 용평리조트는 건형 제설기를 이용하였다. 11월 일최저기온의 경우 대관령에서는 지속적으로 상승하였으나 이천은 1980년대 이후 최근까지 다소 하강하는 경향으로 2000년대 스키리조트 개장일에 영향을 미쳤다. 스키장 폐장일인 2월 중순에도 일최고기온이 $2{\sim}4^{\circ}C$인 수도권 스키리조트가 용평보다 이르다. 보강제설 기간 동안 눈이 활발하게 녹는 날도 대관령보다 이천에서의 증가율이 뚜렷하여 수도권 스키장 관리의 어려움이 예상된다.

• Restorative Dentistry and Endodontics
• /
• 제35권1호
• /
• pp.30-39
• /
• 2010

본 연구에서는, 삼차원 유한요소분석법을 이용하여 복합레진 및 도재 라미네이트로 전치부 치간이개를 폐쇄할 때, 치간이개의 간격과 수복방법이 수복물의 접착계면에서의 응력분포에 미치는 영향을 비교하였다. 복합레진 혹은 도재 라미네이트로 수복된 모습의 유한요소모델을 형성하여 접착계면에서의 von Mises stress 분포 양태를 분석하였다. 수복형태는 크게 네 가지 범주를 고려하였다. Type I, 복합레진으로 인접면을 최소한으로 수복하는 경우; Type II, 치아 삭제 없이 복합레진으로 순면의 절반까지 수복하는 경우; Type III, 치아삭제 후복합레진으로 순면의 2/3까지 수복하는 경우; Type IV, 도재 라미네이트로 수복하는 경우 이 실험의 한계 내에서 다음과 같은 결론을 내릴 수 있었다. 모든 수복형태에 대해 치간이개 간격이 넓어질수록 접착계면에서 발생하는 최대응력 값은 증가하였으며, 도재 라미네이트로 치간이개 부위를 수복한 경우(Type IV)가 복합레진으로 수복한 경우(Type I, II, III)에 비해 높은 최대응력값을 나타내었다. 그러나 치간이개 간격이 넓어질수록 도재 라미네이트와 복합레진에서 발생하는 최대응력값의 차리는 감소하였으며, 치간이개 간격의 증가에 따른 최대응력값의 증가율은 도재 라미네이트가 복합레진으로 수복하는 경우보다 낮았다.