• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1766-1771
• /
• 2007

This paper presents plastic limit loads and approximate J-integral estimates for circumferential part-through surface crack at the interface between elbows and pipes. Based on finite element limit analyses using elastic-perfectly plastic materials, plastic limit moments under in-plane bending are obtained and it is found that they are similar those for circumferential part-through surface cracks in the center of elbow. Based on present FE results, closed-form limit load solutions are proposed. Welds are not explicitly considered and all materials are assumed to be homogeneous. And the method to estimate the elastic-plastic J-integral for circumferential part-through surface cracks at the interface between elbows and straight pipes is proposed based on the reference stress approach, which was compared with corresponding solutions for straight pipes.

• 대한기계학회논문집A
• /
• 제20권7호
• /
• pp.2167-2173
• /
• 1996

An approximate weight function technique using the indirect boundary integral equation has been presented for the analysis of stress intensity foactors(SIFs) of a thick pipe. One-term boundary integral was introduced to represent the crack surface displacement field for the displacement based weight function technique. An explicit closed-form SIF solution applicable to symmetric cracked pipes without any modification of the solution including both circumferential and radial cracks has been derived. The necessary information in the analysis is two or three reference SIFs. In most cases the SIF solution were in good agreement with those available in the literature.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.493-498
• /
• 1999

Many concrete pavements closed to the end of service life in out country need to repair. We investigated material and mix designs for thin bonded concrete overlay and applied it to concrete pavement rehabilitation. The concrete with Type III cement showed earlier strength and better durability than the concrete with Type I cement. Designed concrete mixture with TypeIII cement made it possible to open the road earlier against heavy vehicles, increased traffic despite of cold weather in winter. In the field examination after four month, there was no defects like as shrinkage crack, spalling, surface abrasion and scaling, and good traffic condition has been maintained.

• 대한기계학회논문집
• /
• 제18권9호
• /
• pp.2234-2244
• /
• 1994

A process sequence of multi-operation cold forging for actual application in industry is designed with the rigid-plastic finite element method to form a constant velocity joint housing(CVJ housing). The material flow during the CVJ housing forming is axisymmetric until the final forging process for forming of ball grooves. This study treats the deformation as an axisymmetric case. The main objective of the process sequence design is to obtain preforms which satisfy the design criteria of near-net-shape product requiring less machining after forming. The process sequence design also investigates velocity distributions, effective strain distributions and forging loads, which are useful information in the real process design.

• 한국세라믹학회지
• /
• 제48권5호
• /
• pp.463-466
• /
• 2011

Wet foams formed through direct foaming were stabilized using various concentrations of amiphiphilic particles that could control pore size and porosity. These porous materials showed moderate strength upon compression with high porosity. Bubble size and wet foam stability were tailored by amphiphile concentration, particle concentration, contact angle, and pH of the suspension to obtain crack-free porous solid after sintering. Closed and open pores were obtained with sizes of 30~300 ${\mu}m$ and porosities of over 80%.

• 비파괴검사학회지
• /
• 제27권6호
• /
• pp.582-590
• /
• 2007

Imperfectly jointed interface serves as mechanical waveguide for elastic waves and gives rise to two distinct kinds of guided wave propagating along the interface. Contact acoustic nonlinearity (CAN) is known to plays major role in the generation of these interface waves called generalized Rayleigh waves in non-welded interface. Closed crack is modeled as non-welded interface that has nonlinear discontinuity condition in displacement across its boundary. Mathematical analysis of boundary conditions and wave equation is conducted to investigate the dispersive characteristics of the interface waves. Existence of the generalized Rayleigh wave(interface wave) in nonlinear contact interface is verified in theory where the dispersion equation for the interface wave is formulated and analyzed. It reveals that the interface waves have two distinct modes and that the phase velocity of anti-symmetric wave mode is highly dependent on contact conditions represented by linear and nonlinear dimensionless specific stiffness.

• 콘크리트학회논문집
• /
• 제26권1호
• /
• pp.87-95
• /
• 2014

이 연구에서는 강섬유 보강 초고성능 콘크리트 보의 비틀림 거동을 파악하기 위한 실험연구를 수행하였다. 정사각형 단면을 갖는 6개의 초고성능 콘크리트 보 부재에 대해 하중재하실험을 수행하여 비틀림 거동 특성을 분석하였다. 부재의 실험변수는 강섬유 혼입량과 폐쇄 스터럽량이다. 강섬유 혼입량은 1.0% 및 2.0%로 변화하였고, 폐쇄 스터럽량은 0, 0.35% 및 0.70%로 변화하였다. 실험 결과는 강섬유양이 증가할수록 극한비틀림강도가 증가하고, 폐쇄스터럽량이 증가할수록 극한비틀림강도가 증가하는 것을 나타낸다. 또한, 비틀림 강도 예측식을 제안하였으며, 예측식은 콘크리트, 스터럽 및 강섬유의 비틀림 강도 기여분을 각각 고려하였다. 실험 결과를 이용하여 초고강도 콘크리트 보의 비틀림 강도 예측식의 적합성을 평가하고자 하였다. 비틀림강도 실험 결과를 예측값과 비교하였으며, 예측값은 실험 결과에 거의 근접하고 있는 것으로 나타났다. 따라서, 제안식을 이용하여 초고성능 콘크리트의 비틀림 강도를 효과적으로 예측할 수 있다고 판단된다.

• 보존과학연구
• /
• 통권26호
• /
• pp.141-164
• /
• 2005

Most of the stone cultural properties is exposed to the weathering factor(rain, windetc.), so the shelter is constructed for reduction of its direct effect. But the shelter is indicated some problems that inharmoniousness of the surroundings, in section disturbance for insufficiency of light, the loss about the value of cultural properties and so on. So we have investigated on environmental condition (temperature, relative humidity, wind etc.) at the Standing Stone Buddhist Triad in Bae-ri, Gyeongju and Rock-carved Triad Buddha in Seosan because check the effect of the shelter. As the result, the Standing Stone Buddhist Triad in Bae-ri, Gyeongju is located a pine wood and a lot of bamboo grow naturally in nearing. Environmental difference on inside and outside of the shelter is not found because opened on all sides. But there is so dim for the direction of the sunlight that can't see the Standing Stone Buddhist. The base rock of Rock-carved Triad Buddha in Seosan well develop with crack and break, and the vegetation(trees, moss, lichen etc.) grow naturally in surroundings. Environmental difference on inside and outside of the shelter is found because closed on all sides and opened the front gate only inspection time. Inside of the shelter was too calm(air-velocity not detected) and humid(over 75%RH). Also the surface is occurred the dew(at 2-4 pm) and the efflorescence for effect of the water(rain, dew etc.). Besides the head of the central Buddhist is so dangerous for crack.

• 한국전산구조공학회논문집
• /
• 제21권4호
• /
• pp.307-315
• /
• 2008

PPS(Post-tensioned Precast concrete System)공법은 U자형 PC로 제작된 넓은 보와 PC또는 현장 타설 콘크리트로 제작한 기둥으로 구성되며, PC보와 기둥의 일체성 확보를 위하여 프리스트레스를 도입하였다. 본 연구에서는 포스트텐션을 도입한 넓은 보-기둥 접합부의 구조적 특성을 규명하고, 다양한 변수해석이 가능하기 위한 자료를 제공하고자 유한요소해석 프로그램인 ANSYS을 사용하여 비선형 해석을 수행하였다 콘크리트에 대한 해석요소는 8개의 절점을 가지며 각 절점이 3개의 자유도(X, Y, Z축에 대한 병진 변위)를 갖는 Solid 65요소를 사용하였다. Solid 65요소에서 전단전달계수(Shear-Transfer factor)는 실험값에 근사적으로 해석값을 맞추기 위한 영향 계수값으로 균열이 발생하는 위치에 대한 전단강도의 감소를 반영한다. 그 결과, 본 실험체에 대한 해석에서는 열려진 전단전달계수 0.125와 닫혀진 전달계수 0.85에 기초하여 해석한 결과 닫혀진 전단전달계수는 0.85에서 열려진 전단전달계수에서는 0.2일때 가장 실험값에 근사한 해석치를 보였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권6호
• /
• pp.72-80
• /
• 2018

본 연구는 기계주입 방식으로 간단히 재충전 할 수 있는 TPS 공법을 사용하여 실제 건설현장에 적용한 후 콘크리트 균열에 미치는 영향을 알아보고자 하였는데, 그 결과를 요약하면 다음과 같다. 먼저, 초음파 속도의 경우 TPS 공법을 사용하였을 시 주사기 공법에 비해 평균 약 36 mm/sec로 초음파가 빠른 속도로 통과하는 것을 알 수 있었고, 주입깊이의 경우 주사기 공법에서는 부분 충전되는 것을 확인하였으나 TPS 공법의 경우 강한 주입 압력으로 모든 배합에서 보수재가 100% 충전되는 우수한 경향을 나타내었다. 또한, 압축강도의 경우는 TPS 공법 사용 시 평균 16.8 % 증가하는 것으로 나타나 구조적으로 우수한 것으로 나타났다. 이상을 종합하면 주사기 공법에 비해 TPS 공법을 사용하였을 시 균열부위에 주입재가 밀실하게 충전되어 강도 증진으로 인한 품질 향상 및 확인창 설치로 인한 균열보수제의 거동이 확인 가능하다. 또한, TPS 공법 시공구간 532 m에 대하여 약 5일의 공사 기간이 단축됨에 따라 시공성이 우수하여 콘크리트 구조물에 균열 보수공법으로 사용성이 확대될 것으로 기대된다.