• Journal of Astronomy and Space Sciences
• /
• v.27 no.2
• /
• pp.69-74
• /
• 2010

We present new BVR CCD photometric light curves for the close binary star V445 Cep. A new photometric solution and absolute physical dimensions of the system were derived by applying the Wilson-Devinney program to our observed light curves and radial velocity curves published by Pych et al. The evolutional status of V445 Cep was found to coincide with those of the general low mass ratio contact binary systems.

• Tuberculosis and Respiratory Diseases
• /
• v.82 no.4
• /
• pp.298-305
• /
• 2019

Background: Tuberculosis (TB) causes substantial health burden to the Korean military. This study aims to assess the impact of infectious TB cases on close and casual contacts in the Korean Army settings based on contact investigation data. Methods: Six Army units with infectious TB cases from September 2012 to May 2013 were enrolled in the study. We analyzed the clinical data from close and casual contacts screened using the tuberculin skin test (TST) and QuantiFERON-TB Gold In-Tube to identify latent tuberculosis infection (LTBI) cases. For the control group, 286 military conscripts with no reported TB exposure were tested by TST only. Results: Of the 667 contacts of index cases, LTBI cases identified were as follows: 21.8% of close contacts of smearpositive cases (71/326), 8.5% of casual contacts of smear-positive cases (26/305), and 2.8% of close contacts of smearnegative cases (1/36). In the control group, 16.8% showed positivity in TST. In a multivariate analysis, having stayed in the same room or next room with TB patients was identified as a risk factor of LTBI. Conclusion: Using the data from TB contact investigations in the Korean Army units, we found an overall LTBI rate of 14.7% among the contacts screened. This study demonstrates that contacts living in the same building, especially the same room or next room, with TB patients are at a high risk of acquiring LTBI, serving as additional evidence for defining close and casual contacts of a TB patient with regard to Army barrack settings.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.15-26
• /
• 2003

This study was conducted to investigate the performance times, CM position and CM speed, pole chord length and pole chord angle, whole body angular momentum(X axis), and grip width in pole vault event according to the event and phase; touch down, pole plant, take-off, maximum pole bending pole straight, pole release, peak height, and foot contact, pole contact, free flight. The pole vaulting of four male elite vaulters including six trial were filmed using two video digital cameras at 60 Hz at 56th national athletic match, and data were collected through the DLT method of three dimensional cinematography. In general the better jumper is, the longer the performance time is. And the greater CM speed is, and the better his transformation ability of CM horizontal speed into vertical speed is. As he uses a longer pole, his grip is higher, and it is a enough for him to rock back his body, so that he pulls and pushes the pole well keeping his hips close to. An greater maximum angular momentum and early positioning of the hips parallel to the bar makes his body far side of the bar and his bar clearance easier. Specially our national jumper needs to have more powerful braking force during foot contact phase, and take his body on the pole after maximum pole bending, and pull and push the pole strongly keeping his hips close to. Also he needs to have stronger muscular strength in order to control the longer pole and use the pole of proper tension more efficiently.

• Journal of Mechanical Science and Technology
• /
• v.19 no.spc1
• /
• pp.422-428
• /
• 2005

In this paper, the contact force between two colliding bodies is modeled by using Hertz's force-displacement law and nonlinear damping function. In order to verify the appropriateness of the proposed contact force model, the drop type impact test is carried out for different impact velocities and different materials of the impacting body, such as rubber, plastic and steel. In the drop type impact experiment, six photo interrupters in series close to the collision location are installed to measure the velocity before impact more accurately. The characteristics of contact force model are investigated through experiments. The parameters of the contact force model are estimated using the optimization technique. Finally the estimated parameters are used to predict the impact force between two colliding bodies in opening action of the magnetic contactor, a kind of switch mechanism for switching electric circuits.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1109-1111
• /
• 2004

This paper deals with the calculation of contact resistance depending on the applied force by modeling surface roughness. The true contact surface area is made up of many asperities of varying heights which is close to Gaussian distribution. The mean square deviation and the mean value of the Gaussian distributed asperity heights were determined in this paper. The elastic deformation of the surface asperities according to the increasing of applied force were considered. The contact resistance was also calculated by using the Greenwood analysis.

• Journal of Biomedical Engineering Research
• /
• v.29 no.3
• /
• pp.249-253
• /
• 2008

The indirect-contact ECG (IDC-ECG) was introduced by a prior study for daily non-intrusive measurements. To improve the signal quality and to extend the application area of IDC-ECG, close study of the frequency characteristics of the IDC-ECG is necessary. In this study, the frequency response of the active electrode for several sample clothes was measured under conditions of actual IDC-ECG measurement with human body. Higher gain in low frequency range than expected by prior study was observed. In addition to it, wide variation in gain according to the cloth type in the low frequency range was observed. Variation in gain caused by moisture variation in the clothes was also observed. This study shows that the parallel R-C connection is proper for electrode model and the resistive factor is influenced by moisture in the clothes. This study is the first that provides the frequency response of the electrode in the actual indirect-contact ECG measurement and it is expected that the results will be helpful to improve the indirect-contact ECG method.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.9
• /
• pp.1165-1173
• /
• 1997

The steady state close-contact melting phenomenon occurring between a phase change material and an isothermally heated flat plate with relative motion is investigated analytically, in which the effects of vertical convection in the liquid film and solid-liquid density difference are incorporated simultaneously. Not only the scale analysis is conducted to estimate a priori qualitative dependence of system variables on characteristic parameters, but also an analytical solution to a set of simplified model equations is obtained to specify the effects under consideration. These two results are consistent with each other, in that the vertical convection affects both the solid descending velocity and the film thickness, and that the density difference alters only the solid descending velocity. While the effect of vertical convection can be characterized conveniently by a newly introduced temperature gradient factor which asymptotically approaches the unity/zero with decreasing/increasing the Stefan number, that of density difference is represented by the liquid-to-solid density ratio. It is shown that the solid descending velocity depends linearly on the density ratio, and that the ratios of solid descending velocity, film thickness and friction coefficient to the conduction solution are proportional to 3/4, 1/4 and -1/4 powers of the temperature gradient factor, respectively. Also, established is the fact that the effect of convection can be legitimately neglected in the analysis for the range of the Stefan number less than 0.1.

• Women's Health Nursing
• /
• v.27 no.3
• /
• pp.220-229
• /
• 2021

Purpose: The world saw a shift into a new society consequent to the coronavirus disease 2019 (COVID-19), which made home quarantine mandatory for a person in close contact with those who tested positive. For children, however, home quarantine was not limited only to themselves but parents, especially mothers were involved and required to quarantine. This qualitative study aims to explore and understand mothers' experience and their related psychosocial issues while caring for their school-aged children in Korea, who had to home quarantine after coming in close contact with COVID-19 positive individuals. Methods: Data were collected from October 2020 to January 2021 via in-depth, semi-structured interviews with nine mothers of children who had to home quarantine. Interviews were conducted face-to-face in an independent space near the participant's home or workplace (n=5) or via online platforms or telephone (n=4). The data were analyzed using thematic analysis through several iterative team meetings. Results: Thematic analysis revealed the following four themes: "Unable to be relieved due to uncertain situations surrounding me," "Blame and hurt toward me, others, and one another," "Pulling myself together for my children in my broken daily life," and "Changes in the meaning of life amid COVID-19." Conclusion: The narratives show that mothers experienced psychosocial difficulties while caring for their children during home quarantine. It is necessary to reduce the social stigma toward individuals in home quarantine and establish policies to ensure work-family compatibility for such mothers.

• Structural Engineering and Mechanics
• /
• v.21 no.2
• /
• pp.205-220
• /
• 2005

This paper presents the possibilities of adapting artificial neural networks (ANNs) to predict the dimensionless parameters related to the maximum contact pressures of an elasticity problem. The plane symmetric double receding contact problem for a rigid stamp and two elastic strips having different elastic constants and heights is considered. The external load is applied to the upper elastic strip by means of a rigid stamp and the lower elastic strip is bonded to a rigid support. The problem is solved under the assumptions that the contact between two elastic strips also between the rigid stamp and the upper elastic strip are frictionless, the effect of gravity force is neglected and only compressive normal tractions can be transmitted through the interfaces. A three layered ANN with backpropagation (BP) algorithm is utilized for prediction of the dimensionless parameters related to the maximum contact pressures. Training and testing patterns are formed by using the theory of elasticity with integral transformation technique. ANN predictions and theoretical solutions are compared and seen that ANN predictions are quite close to the theoretical solutions. It is demonstrated that ANNs is a suitable numerical tool and if properly used, can reduce time consumed.

• Structural Engineering and Mechanics
• /
• v.54 no.4
• /
• pp.607-622
• /
• 2015

This paper presents a comparative study of analytical method and finite element method (FEM) for analysis of a continuous contact problem. The problem consists of two elastic layers loaded by means of a rigid circular punch and resting on semi-infinite plane. It is assumed that all surfaces are frictionless and only compressive normal tractions can be transmitted through the contact areas. Firstly, analytical solution of the problem is obtained by using theory of elasticity and integral transform techniques. Then, finite element model of the problem is constituted using ANSYS software and the two dimensional analysis of the problem is carried out. The contact stresses under rigid circular punch, the contact areas, normal stresses along the axis of symmetry are obtained for both solutions. The results show that contact stresses and the normal stresses obtained from finite element method (FEM) provide boundary conditions of the problem as well as analytical results. Also, the contact areas obtained from finite element method are very close to results obtained from analytical method; disagree by 0.03-1.61%. Finally, it can be said that there is a good agreement between two methods.