• Journal of IKEEE
• /
• v.3 no.1 s.4
• /
• pp.50-56
• /
• 1999

This paper presents a new technique for generating precise clock delays. The technique can obtain finer timing resolution less than the gate delay of the delay chain by locking in multiple clock period. Using this technique, a 250ps of timing resolution could be achieved from a 750ps delay of the single delay stage in a DLL(Delay Locked Loop) structure. The delay chain of the proposed circuit is locked on three times of the clock period and a finer delay resolution than the absolute gate delay is achieved and verified through the simulation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.10
• /
• pp.63-68
• /
• 2004

A high-resolution synchronous mirror delay (SMD) is proposed in order to reduce the clock skew between the external clock and the infernal clock of a chip. The proposed SMD reduces the clock skew in two steps. Coarse locking is achieved by the SMD. Fine locking is achieved by the successive approximation register-controlled DLL. The total locking time is 10 clock cycles. Simulation results show that the proposed SMD operates with 50psec clock skew at 182MHz and consumes 17.5mW at 3.3V supply voltage in a 0.35 um 1-poly 4-metal CMOS technology.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.6
• /
• pp.446-455
• /
• 2001

In this paper, the precise synchronized clock generator using GPS receiver is presented. The GPS receiver provides a synchronized IPPS signal which guaranties a reliable standard time mark. This signal allows us to do time synchronization and correct the time step. We designed and implemented the precise synchronized clock generator based on DPLL in order to generate a high-resolution clock from a low-cost inaccurate oscillator with ALTERA FLEX EPM6016TC144-3. We also implemented a hardware unit and proved that the unit provides 1MHz clock output which had a high resolution and accuracy when it was combined with GPS receiver.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1984-1987
• /
• 2002

This paper describes the design and implementation of a single-chip digitally synthesized 0-35MHz agile function generator. The chip comprises an integrated direct digital synthesizer (DDS) with a 10-bit on- chip digital-to-analog converter (DAC) using an n-well single-poly triple-metal 0.5-$\mu\textrm{m}$ CMOS technology. The main features of the chip include maximum clock frequency of 100 MHz at 3.3-V supply voltage, 32-bit frequency tuning word resolution, 12-bit phase tuning word resolution, and an on-chip 10-bit DAC. The chip provides sinusoidal, ramp, saw-tooth, and random waveforms with phase and frequency modulation, and power-down function. At 100-MHz clock frequency, the chip covers a bandwidth from dc to 35 MHz in 0.0233-Hz frequency steps with 190-ns frequency switching speed. The complete chip occupies 12-mm$^2$die area and dissipates 0.4 W at 100-MHz clock frequency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.7
• /
• pp.816-821
• /
• 2019

A counter-type time-to-digital converter was designed using a dual edge T flip-flop. The time-to-digital converter was designed with a $0.18{\mu}m$ CMOS process at a supply voltage of 1.5 volts. In a typical time-to-digital converter, when the period of the clock is T, a conversion error corresponding to the period of the clock occurs due to the asynchronism between the input signal and the clock. However, the clock of the time-to-digital converter proposed in this paper is generated in synchronization with the start signal which is the input signal. As a result, conversion errors that may occur due to asynchronization of the start signal and the clock do not occur. The flip-flops constituting the counters are composed of dual-edge flip-flops operating at the positive and negative edges of the clock to improve the resolution.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.4
• /
• pp.773-779
• /
• 2013

We propose an efficient method to measure a pulse width using multiphase clock signals generated from a ring oscillator. These clocks, which have the same frequency and are evenly spaced, give multiple rising edges within a clock cycle. Thus, it is possible to measure a pulse width more accurately than with existing single clock-based methods. The proposed method is applied to a capacitive touch switch. Experimental results show that the capacitive touch switch with the proposed method gives a 118 fF resolution, which is 6.4 times higher than that of the touch switch with a single clock-based pulse width measurement method.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.520-527
• /
• 2016

A new dual-loop digital delay-locked loop (DLL) using a hybrid (binary + sequential) search algorithm is presented to achieve both wide-range operation and high delay resolution. A new phase-interpolation range selector (PIRS) and a variable successive approximation register (VSAR) algorithm are adopted to resolve the boundary switching and harmonic locking problems of conventional digital DLLs. The proposed digital DLL, implemented in a $0.18-{\mu}m$ CMOS process, occupies an active area of $0.19mm^2$ and operates over a wide frequency range of 0.15-1.5 GHz. The DLL dissipates a power of 11.3 mW from a 1.8 V supply at 1 GHz. The measured peak-to-peak output clock jitter is 24 ps (effective pk-pk jitter = 16.5 ps) with an input clock jitter of 7.5 ps at 1.5 GHz. The delay resolution is only 2.2 ps.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3A
• /
• pp.237-246
• /
• 2007

Clock Synchronization is one of the most basic factors to be considered when we implement an indoor synchronization network for indoor positioning. In this paper, we present a new synchronization algorithm which does not employ time stamps in order to reduce the hardware complexity and data overhead. In addition to that, we describe an algorithm that is designed to compensate the frequency drift giving an serious impact on the synchronization performance. The performance evaluation of the proposed algorithm is achieved by investigating MTIE (Maximum Time Interval Error) values through simulations. In the simulations, the frequency drift values of the practical oscillators are used. From the simulation results, it is investigated that we can achieve the synchronization performance under 10 ns when we use 1 second synchronization interval with 1 ns resolution and TCXOs (Tmperature Compensated Cristal Oscillators) both in the master clock and the slave clock.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.9
• /
• pp.172-178
• /
• 2002

One of the ever-increasing demands on the performances of heterodyne interferometers is to improve the measurement resolution, of which current state -of-the-art reaches the region of sub-nanometers. So far, the demand has been met by increasing the clock speed that drives the electronics involved fur the phase measurement of the Doppler shift, but its further advance is being hampered by the technological limit of modem electronics. To cope with the problem, in this investigation, we propose a new scheme of phase -measuring electronics that reduces the measurement resolution without further increase in clock speed. Our scheme adopts a super-heterodyne technique that lowers the original beat frequency to a level of 1 MHz by mixing it with a stable reference signal generated from a special phase- locked-loop. The technique enables us to measure the phase of Doppler shift with a resolution of 1.58 nanometer at a sampling rate of 1 MHz. To avoid the undesirable decrease in the maximum measurable speed caused by the lowered beat frequency, a special form of frequency up-down counting technique is combined with the super-heterodyning. This allows performing required phase unwrapping simply by using programmable digital gates without 2n ambiguities up to the maximum velocity guaranteed by the original beat frequency.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.8
• /
• pp.156-164
• /
• 2014

In a delay line type of a time-to-digital converter implemented in Field Programmable Gate Array, the timing accuracy decreases for a longer carry chain. In this paper, we propose a structure that has a multi-phase clock and a state machine to check metastability; this would reduce the required length of the carry chain with the same time resolution. To reduce the errors caused by the time difference in the four delay lines associated with a four-phase clock, the proposed TDC generates a single input pulse from four phase clocks and uses a single delay line. Moreover, the state machine is designed to find the phase clock that is used to generate the single input pulse and determine the metastable state without a synchronizer. With the measurement range of 1 ms, the measured resolution was 22 ps, and the non-linearity was 25 ps.