• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.10
• /
• pp.1123-1130
• /
• 2015

Network on a chip(NoC) is a communication subsystem between intellectual property(IP) cores in a SoC and improves high performance in the scalability and the power efficiency compared with conventional buses and crossbar switches. NoC needs a synchronizer to overcome the metastability problem between data links. This paper presents a new mesochronous synchronizer(MS) which is composed of selection window generator, selection signal generator, and data buffer. A delay line circuit is used to build selection window in selection window generator based on the delayed clock cycle of transmitted clock and the transmitted clock is compared with local clock to generate a selection signal in the SW(selection window). This MS gets rid of the restriction of metastability by choosing a rising edge or a falling edge of local clock according to the value of selection signal. The simulation results show that the proposed MS operates correctly for all phase differences between a transmitted clock and a local clock.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1157-1160
• /
• 2003

We proposed a study on optimal clock period selection algorithm for low power RTL design. The proposed algorithm use the way of maintaining the throughput by reducing supply voltage after improve the system performance in order to minimize the power consumption. In this paper, it select the low power to use pipeline in the transformation of architecture. Also, the algorithm is important the clock period selection in order to maximize the resource sharing. however, it execute the optimal clock period selection algorithm.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.2
• /
• pp.83-87
• /
• 2011

Clock selection has a significant impact on the performance and quality of designs in high-level synthesis. Almost systems require that the clock length is required prior to scheduling, the best value of the clock can be found only after evaluating different schedules. In this study, we presents a scheduling method that works simultaneously with synthesis by selecting a clock from a chainable operation set. Our scheduling algorithm is based on list scheduling and executes chaining considering bit level delays based on selected clock period. Experimental results show that our method improves the performance by 18 percent.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.1
• /
• pp.1-9
• /
• 1998

In the circuit model that outputs are latched and input vectors are successively applied at inputs, the gate resizing approach to reduce the delay of the critical pathe may not improve the performance. Since the clock period is etermined by delays of both long and short paths in combinational circuits, the performance (clock period) can be optimized by decreasing the delay of the longest path, or increasing the delay of the shortest path. In order to achieve the desired clock period of a circuit, gates lying in sensitizable long and short paths can be selected for resizing. However, the gate selection in path sensitization approach is a difficult problem due to the fact that resizing a gate in shortest path may change the longest sensitizable path and viceversa. For feasible settings of the clock period, new algorithms and corresponding gate selection methods for resizing are proposed in this paper. Our new gate selection methods prevent the delay of the longest path from increasing while resizing a gate in the shortest path and prevent the delay of the shortest path from decreasing while resizing a gate in the longest sensitizable path. As a result, each resizing step is guaranteed not to increase the clock period. Our algorithmsare teted on ISCAS85 benchmark circuits and experimental results show that the clock period can beoptimized efficiently with out gate selection methods.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.4 no.1
• /
• pp.9-16
• /
• 2008

This paper presents a frequency selection algorithm for minimization power consumption of processor in Mobile System. The proposed algorithm has processor designed low power processor using clock gating method. Clock gating method has improved the power dissipation by control main clock through the bus which is embedded clock block applying the method of clock gating. Proposed method has compared power consumption considered the dynamic power for processor, selected frequency has considered energy gain and energy consumption for designed processor. Or reduced power consumption with decreased processor speed using slack time. This technique has improved the life time of the mobile systems by clock gating method, considered energy and using slack time. As an results, the proposed algorithm reduce average power saving up to 4% comparing to not apply processor in mobile system.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.4
• /
• pp.111-116
• /
• 2003

We proposed a optimal clock period selection algorithm for low power Register Transfer Level design. The proposed algorithm use the way of maintaining the throughput by reducing supply voltage after improve the system performance in order to minimize the power consumption. In this paper, it select the low power to use pipeline in the transformation of architecture. Also, the proposed algorithm is important the clock period selection in order to maximize the resource sharing. however, it execute the optimal clock period selection algorithm. The experiment result is to set the same result AR and HAL filter on the high level benchmark and to reduce in the case of two pipe stage 10.5% and three pipe stage as many as 33.4%.

• Journal of Communications and Networks
• /
• v.18 no.1
• /
• pp.65-74
• /
• 2016

Ship ad-hoc network (SANET) extends the coverage of the maritime communication among ships with the reduced cost. To fulfill the growing demands of real-time services, the SANET requires an efficient clock time synchronization algorithm which has not been carefully investigated under the ad-hoc maritime environment. This is mainly because the conventional algorithms only suggest to decrease the beacon collision probability that diminishes the clock drift among the units. However, the SANET is a very large-scale network in terms of geographic scope, e.g., with 100 km coverage. The key factor to affect the synchronization performance is the signal propagation delay, which has not being carefully considered in the existing algorithms. Therefore, it requires a robust multi-hop synchronization algorithm to support the communication among hundreds of the ships under the maritime environment. The proposed algorithm has to face and overcome several challenges, i.e., physical clock, e.g., coordinated universal time (UTC)/global positioning system (GPS) unavailable due to the atrocious weather, network link stability, and large propagation delay in the SANET. In this paper, we propose a logical clock synchronization algorithm with multi-hop function for the SANET, namely multi-hop clock synchronization for SANET (MCSS). It works in an ad-hoc manner in case of no UTC/GPS being available, and the multi-hop function makes sure the link stability of the network. For the proposed MCSS, the synchronization time reference nodes (STRNs) are efficiently selected by considering the propagation delay, and the beacon collision can be decreased by the combination of adaptive timing synchronization procedure (ATSP) with the proposed STRN selection procedure. Based on the simulation results, we finalize the multi-hop frame structure of the SANET by considering the clock synchronization, where the physical layer parameters are contrived to meet the requirements of target applications.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.4
• /
• pp.39-45
• /
• 2015

In this paper, variable rate CDR(Clock and Data Recovery) circuit adopting blind oversampling architecture is presented. The clock recovery circuit is implemented by using wide range voltage controlled oscillator and band selection method and the data recovery circuit is designed to digital circuit used majority voting method in order to low power and small area. The designed low power variable clock and data recovery is implemented by wide range voltage controlled oscillator and digital data recovery circuit. The designed variable rate CDR is operated from 10 bps to 2 Mbps. The total power consumption is about 4.4mW at 1MHz clock. The supply voltage is 1.2V. The designed die area is $120{\mu}m{\times}75{\mu}m$ and this circuit is fabricated in $0.13{\mu}m$ CMOS process.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.4
• /
• pp.181-187
• /
• 2003

This paper presents an 125MHz, 128-phase phase-locked loop using interpolation technique for digital timing recovery. To reduce the power consumption and chip area, phase interpolation was performed over only selected windows, instead of overall period. Four clocks were used for phase interpolation to avoid the output jitter increase due to the interpolation clock (clock used for phase interpolation) switching. Also, the output clock was fed back to finite-state machine (FSM) where the multiplexer selection signals are generated to eliminate the possible output glitches. The PLL implemented in a $0.25\mu\textrm{m}$ CMOS process and dissipates 80mW at 2.5V supply and occupies $0.84\textrm{mm}^2.

• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.455-459
• /
• 2015

This paper proposes a dispatch unit of GP-GPU with SIMT architecture to support the acceleration of general-purpose operation as well as graphics processing. If all the information of an operand used instructions issued from the warp scheduler is decoded, an unnecessary operand load occurs, resulting in register loads. To resolve this problem, this paper proposes a method that can reduce the operand load and the load on the resister by decoding only the information of the operand using a pre-decoding method. The operand information from the dispatch unit is passed to the operand selection unit with preventing register bank collisions. Thus the overall performance are improved. In the simulation test, the total clock cycles required by processing 10,000 arbitrary instructions issued from the wrap scheduler using ModelSim SE 10.0b are measured. It shows that the application of the dispatch unit equipped with the pre-decoding function proposed in this paper can make an improvement of about 12% in processing performance compared to the conventional method.