• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.272-273
• /
• 2017

As businesses put a greater emphasis on outward appearances, the demand for external window cleaning has been on the rise. However, with the conventional labor-intensive window cleaning method, it is hard to meet this demand. Therefore, this study proposes a Life Cycle Cost (LCC) analysis model for a guiderail-type cleaning robot, and estimate the LCCs of the conventional method and the cleaning robot. The findings of this research are expected to serve as a guide for future development of a cleaning robot.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.5
• /
• pp.67-75
• /
• 2014

In this study, the large-scale hydraulic model test was performed to investigate the hydraulic characteristics for development of the non-power soil cleaning and keeping system at the dike gate. The outlet height, outflow number, outflow discharge, and outflow cycle were compared and analyzed. The non-power soil cleaning and keeping system was most effective at 11.2 mm in the outlet height. And then the mean outflow cycle was 1.09 sec, and the mean outflow discharge was $0.00164m^3/s$. The total outflow number increased gradually as the water level of a water tank increased, and the outlet height decreased. As a level of water tank decreased, the mean outflow cycle was lengthened, and the unit outflow discharge increased. This result showed this system was most effective. To remove the silty clay deposited in facilities, the methods of excavation, dredging, high pressure washing, etc have been applied to the tidal facilities such as land reclamation, a small size fishing port, and a harbor for maintenance. However, this is extremely cost-ineffective, whereas the non-power soil cleaning and keeping system will bring about an enormously positive economic effect. In addition, when the non-power soil cleaning and keeping system is applied to the dike gate of land reclamation, a thorough examination of the local tidal data and the careful system planning are required to prevent the disaster damage caused by flooding.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_3
• /
• pp.1315-1324
• /
• 2022

The need for remanufacturing ships and various mechanical components continues to increase along with environmental problems. Research on remanufacturing is being carried out in various fields, but research on cleaning is quite insufficient. In particular, there is no research on the cleaning-ability of diverse mechanical components. In order to increase the life cycle of mechanical components, remanufacturing must be considered from the step of design. Particularly, it is also very important to evaluate the degree of easiness in cleaning to remove various pollutants generated by long-term use quickly as well as easily. In this study, the degree of easiness in cleaning is defined as cleaning-ability. In fact, remanufacturing components can be easily done only when cleaning-ability is set high from the step of design. The purpose of this study is to evaluate the cleaning-ability of ships and various mechanical components. The details of easiness in cleaning are cleaning and drying identification, accessibility to cleaning tools, convenience in cleaning, and convenience in drying. This study presents a quantitative procedure to evaluate cleaning-ability, derived various factors influencing each of the details of easiness and their ranges, and gave scores to the factors according to their ranges. The weight was also calculated for the details of easiness in cleaning and the factors. Lastly, this researcher suggests a scoring procedure to evaluate cleaning-ability quantitatively and the total weight of cleaning-ability.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.6
• /
• pp.851-860
• /
• 2012

In this study, to evaluate the abatement of runoff pollution loads by the road sweeping(cleaning), various investigations are implemented at the sample area of the highway. As the results of evaluating the removal efficiency of pollutants along road cleaning, TSS showed about 78 % of the removal efficiency and COD showed 49 % of removal efficiency through the operation of cleaning vehicle of vacuum suction method. In case of TN and TP, they showed the relatively-lower removal efficiency by 30~35 %. TSS removal efficiency along the number of cleaning appeared about 60 % in case of one time of cleaning and the additional removal effect did not appear though the number of cleaning increased to two times. With running speed of cleaning vehicle, TSS removal ratio is lessened from 60 % to 20 % when cleaning vehicle speed up to 20 km/hr from 6 km/hr. It seems that the reasons why the removal efficiencies are inversely proportional to its speed are related to the lower vacuum efficiencies and the disturbed particles on the road. In the pollutant build-up analysis, it is showed that it takes more time to the critical pollutant build-up in the shoulder than the center of the road. It is also showed that the proper cleaning cycle is recommended as 4~6 dry weather days without rainfall events.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.157-159
• /
• 2012

In recent years, the number of high-rise buildings has been on the rise. As buildings have become larger in scale, significantly different issues related to their construction and maintenance have emerged. In addition, the automation and mechanization of the cleaning work for the curtain wall, one of the most frequently-performed tasks in building maintenance, is required as a fundamental measure. For this reason, a guide-rail type cleaning robot system is emerging as one of the measures in response to external factors, including gust. The major objective of this study is to propose an economic feasibility forecasting model and to apply the a building facade cleaning robot which is now under development.

• The Korean Journal of Zoology
• /
• v.36 no.1
• /
• pp.36-50
• /
• 1993

한국산 관박쥐(Rhinolophusfewmequinum Jroma의 웅성생식 pattern을 알아보기 위하여 정소의 형태변화와 세정관 정상피의 1년주기를 조사하여 다음과 같은 결론을 얻었다. 정자형성은 5월에 시작되어 10월말에 완료되었다. 7월초부터 10월중순까지는 정자변태과정이며, 정자형성과정의 활성도가 가장 높은 달은 8월 중순경이었다. 또한 교미가 끝난 11월경부터 세정관내에는 미성숙한 정자세포가 Sertoli cell의 식작용과정의 일환으로 포식되어졌고, 91년 12월부터 92년 1월, 2월, 3월, 그리고 동면각성기인 4월의 실험군에서도 역시 점진적으로 식작용 과정을 관찰할 수 있었다. 교미가 끝난 후의 세정관 내에는 새로운 정자를 만들기 위한 준비단계로서 미성숙된 정자들이 Sertoli cell의 식작용에 의해 정화(cleaning)되므로 이 기간을 정화기간(cleaning time)이라 볼 수 있다. 따라서 정소내 세정관의 1년 주기를 볼 때 정화기간은 동면 개시기인 11월부터 익년 4월까지 약 6개월에 걸쳐 이루어 진다. 이상의 결과로 볼때, 정자형성은 동면각성 직후부터 시작하여 10월경에 완료되며 교미개시기에는 정지되고, 동면기 동안 정자형성이 일어나지 않는 점으로 보아 한국산 관박쥐는 'Pipistnfluspottem'에 속한다고 할 수 있다.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.1
• /
• pp.56-63
• /
• 2012

Due to the development of construction technology, there is a considerable increase in the number of skyscrapers in the world. Accordingly, there are rapid growing requests about maintenance systems such as cleaning, painting, and monitoring the processes of facade in highrise buildings. However, it is extremely dangerous working the walls of high-rise buildings, and crashes from buildings have accounted for large proportion of constructional accidents. An alternative solution must be developed with the commercialization of automatic robot systems. For the last decade, interest in developing robots for cleaning and maintenance in facade of highrise buildings has continuously increased. The use of automatic robot systems can be expected to reduce accidents and decrease labor costs. In this paper, we propose a new kind of cleaning mechanism. We have designed and manufactured various cleaning tools for different types of facades with economic commercialization. The cleaning cycle, size, and intensity will be determined by economic constraints as well. The final goals are to design and manufacture tools and robots that can clean facades efficiently and rapidly even in dangerous places. The cleaning tool systems consist of nozzles, brush rollers, and squeezing devices. Furthermore, these tools and robots perform each process utilizing the systems of built-in guide types and gondola types for building maintenance. The performance of the proposed cleaning tools is evaluated experimentally; however additional study should be necessary for safer and more stable commercialization.

• Agribusiness and Information Management
• /
• v.9 no.1
• /
• pp.18-22
• /
• 2017

It takes lots of time and labor if a worker have to measure the water quality at a certain but designated time every day in an un-automated aqua farm. In addition, if the equipment is soaked in the sea water consistently, it will be contaminated by diverse floating matters and barnacles, and it often becomes mal-functional within 2~3 months. Therefore, we need to develop a system with which the sensed data could be checked in real time and operated automatically, while preventing the contamination of the sensor, a crucial component for water quality measuring equipment, as much as possible, and increasing the replacement cycle. We have developed a non-cleaning water quality measuring equipment and its software which are used in the fishery household of offshore aqua farms. By providing the workers with a mobile application which has a function of monitoring the water quality in real time, they can check the situation directly without going to the fishery household.

• Tribology and Lubricants
• /
• v.39 no.6
• /
• pp.256-261
• /
• 2023

This study is conducted to evaluate the durability of superhydrophobic surfaces, with a focus on two aspects: contact angle measurement and self-cleaning-performance analysis. Superhydrophobic copper and aluminum surfaces are fabricated using the immersion method and subjected to a rolling wear test, in which a 2 kg weight is placed on a rolling tester, under loaded conditions. To evaluate their durability, the contact angles of the specimens are measured for each cycle. In addition, the surface deformation of the specimens before and after the test is analyzed through SEM imaging and EDS mapping. The degradation of the self-cleaning performance is evaluated before and after the wear test. The results show that superhydrophobic aluminum is approximately 4.5 times more durable than superhydrophobic copper; the copper and aluminum specimens could endure 21,000 and 4,300 cycles of wear, respectively. The results of the self-cleaning test demonstrate that superhydrophobic aluminum is superior to superhydrophobic copper. After the wear test, the self-cleaning rates of the copper and aluminum specimens decrease to 72.7% and 83.4%, respectively. The relatively minor decrease in the self-cleaning rate of the aluminum specimen, despite the large number of wear cycles, confirms that the superhydrophobic aluminum specimen is more durable than its copper counterpart. This study is expected to aid in evaluating the durability of superhydrophobic surfaces in the future owing to the advantage of performing wear tests on superhydrophobic surfaces without damaging the surface coating.

• Korean Journal of Occupational Health Nursing
• /
• v.24 no.3
• /
• pp.183-193
• /
• 2015

Purpose: The purpose of this study was to describe cleaning workers' working experiences in Korea. Methods: The data were collected in two focus-group interviews with 9 cleaning workers. The phenomenological analytic method suggested by Colaizzi was used to analyze the data. Results: Five theme clusters and thirteen themes emerged from the analysis. The first theme clusters, 'Dead-end choice' included Limits of elderly women workers, Financial difficulties, Lowered self-esteem. The second theme clusters, 'Facing with discriminatory working environments' included Fear and unfair working conditions. The third theme clusters, 'Potential health problems' included Physical overload, Repeated exposure to hazardous substances and Emotional labor. The fourth theme clusters, 'Excluded from protection of the law' included Gloomy reality and Sexual harassment. The fifth theme clusters, 'Desire to get out of social isolation' included Efforts to maintain the status, Desire to live confidently and Desire to change social recognition. Conclusion: The findings of the study provide understanding on cleaning workers' working experiences to explain by their vision and language and should ensure proper working conditions and environment to live a better life.