• 보존과학회지
• /
• 제34권3호
• /
• pp.211-225
• /
• 2018

원주 법천사지 지광국사탑(국보 제101호)은 고려시대(11세기 경)에 조성된, 양식과 기법이 매우 뛰어난 승탑이다. 1912년에 일본 오사카로 무단 반출되었다가 반환되었으며, 한국전쟁기간에 큰 손상을 입었다. 이후 모르타르와 같은 재료를 사용하여 보수되었으며, 이 과정에서 국립고궁박물관 옆으로 이건되었다. 지광국사탑의 표면오염은 대부분 보수재료를 중심으로 나타난다. 변색 등급이 높은 흑화는 북측면과 앙시에서 비교적 높은 점유율을 보였다. 이는 상대적인 수분유지시간에 따른 것으로 해석된다. 표면오염물은 대부분 방해석과 석고이며, 특히 흑화부위는 2차적으로 대기오염물질의 영향을 받았다. 상대적으로 변색도가 낮은 석재에서도 조암광물사이에서 염결정이 확인되며 부분적으로 표면을 피복하고 있다. 지광국사탑은 보수과정에서 사용된 모르타르가 열화되면서 용해된 석회물질의 영향으로 탑신 전반에 걸쳐 변색에 의한 손상이 넓게 나타난 것으로 해석된다. 따라서 보존처리 과정에서 표면오염물 제거와 세정 및 탈염처리를 통해 염에 의한 물리화학적 손상을 제어할 필요가 있다.

• 대한간호학회지
• /
• 제28권3호
• /
• pp.705-717
• /
• 1998

Ostomates have suffered from many difficulties due to their physical, psychosocial handicaps and changes of life style to include ostoma management that influences their daily and quality of life. An appropriate nursing education for ostoma management is very important. Practical educational materials needs revision because those were developed by pharmaceutical companies and hospital institutions. The purpose of this study is to provide more practical and reasonable education materials for ostomates by doing analysis and survey of educational materials now being used. We surveyed 8 types of educational materials used in 23 university hospitals and medical centers in Seoul ; four of them were developed by department of nursing and the remainder by an Ostomy Company Data, collected from July 14, 1997 through July 31, 1997 were analyzed. The results are as follows ; 1. The analysis of education guide, on ostomate included 14 subcategories : introduction, structure and function of gastrointestinal tracts, definition of stoma, types of ostomy, definition of peristalsis, methods of defecation management, selection of instrument, resolution of problems and general situations following surgery, daily life, where to ask for help, explanations for terms, information about where to buy instrument, explanations for enterostomal therapist, a matter of consultation with doctor, etc. 2. Introduction contained specific contents on practical ostomate management that ostomates would experience through their lives. Ostomate education guides were developed 3 hospitals except one which missed this point. 3. Most ostomate education guides, except one hospital, helped ostomates to understand their physical structure changes with specific explanations on gastrointestinal tracts with figures. 4. Six institutions did not talk about the definition of peristalsis. 5. All institutions, except two, helped ostomates to understand types of ostomy with figures. 6. More detailed explanations on natural defecation are needed. The benefits and pitfalls of natural defecation should be more specified. 7 No psychosocial difficulties of ostomy management were addressed. 8. The efficiency of enema can be better understood through all explanations with figures. Some institutions did not mention items about definition, benefits, pitfalls of enema, sequency of enema, how to wash, cautions performing and enema, skin management, cleaning instrument after enema proper time to spend. 9. There were no detailed contents and what to do in case of not being able to do enema. 10. Only one educational material mentioned emotional aspects after the surgrey. 11. Most institutions explained subcategory of daily life but did not provide specific contents on the difficulties of physical, psychological, and sociocultural controls. 12. The subcategory of ureterostomy education guides included explanations on normal structure and function of urinary tracts, types of ureterostomy, how to manage skin, usage and types of instrument, commercial urostomy, how to manage instrument, daily life, introduced the general contents. However, more specific explanations were needed.

• 청정기술
• /
• 제4권2호
• /
• pp.41-53
• /
• 1998

열처리시 대부분 연소로의 경우는 대기중에서 열처리되기 때문에 표면에 산화피막이 형성된다. 그러므로 이의 제거를 위해 숏블라스트(Shot blasting) 같은 연마와 산세공정이 추가되므로 공정소요 시간이 오래 걸리고 연마분진으로 인한 작업장의 환경악화는 물론 제품의 형상이 복잡하거나, 강관의 내면은 처리가 더욱 어려워진다. 그러므로 본 연구에서는 연소로 내부에 고온 내구성을 지닌 강재로 내부로를 제작하고 내부 분위기를 불활성분위기로 조절하여 산화피막의 형성을 저감시키기 위하여 연구하였다. 전기로에서 실험된 시편의 SEM, EPMA, EDX의 분석결과 산화피막이 저감됨을 알 수 있었고, 또한 진공로와의 처리품질 비교에서도 진공로와 유사한 광휘성을 나타내었다. 연구결과 개선공정을 적용하기 위해 내부로는 원통형에 재질은 SBB410으로 제작하고 분위기 가스가 유입되는 가스관로는 STS310으로 하부에서 유입시키는 방식이 가장 효율적일 것으로 도출되었다. 기적용된 사업장의 절감효과를 적용한 경제성 평가에서 연간 약 4천만원 이상의 절감효과가 기대되고, 청정기술적 효과로는 열처리 이후 제품의 구조상 제거되지 못하는 산화피막에 대한 대책 수립 및 산화피막 폐기물발생 저감, 그리고 공정단축과 작업환경의 개선효과를 볼 수 있다.

• Tuberculosis and Respiratory Diseases
• /
• 제40권1호
• /
• pp.29-34
• /
• 1993

연구배경 : Ikeda에 의해 임상에 도입된 굴곡성 기관지경은 각종 폐 질환의 진단과 치료에 광범위하게 이용되고 있으며 시술 증례도 증가하고 있으나 외국에서는 결핵균, 비결핵항산균 및 여러 세균들에 의한 기관지경의 교차오염예가 다수 보고되고 있으므로 기관지경의 세척과 소독방법에 대해 주의를 기울여야 한다. 방법 : 1991년 11월부터 1992년 5월 까지 기관지내시경을 시행한 예중에서 기관지세척액에서 비결핵항산균이 배양된 예들을 분석하고 본원에서 화학살균제로 사용하고 있는 2% alkaline glutaraldehyde의 살균작용을 평가하기 위하여 실험실내에서 2% alkaline glutaraldehyde와 비결핵항산균 및 세균을 접촉시킨후 균의 사멸 여부를 알아 보았다. 결과 : 2% glutaraldehyde 소독제 용액에 비결핵항산균은 2% glutaraldehyde 1:1 용액으로 30분간 접촉한 후 균이 자라지 않았으며 그 밖의 세균들은 접촉 바로 후에 자라지 않았다. 위발생 인지후 철저한 기계적 세척과 함께 세척기내에서 30분이상 2% glutaraldehyde에 담가둔 이후로는 위양성이 발생하지 않았다. 결론 : 기관지경 사용후 기계적 세척을 철저히 하는 것이 중요하며 2% glutaraldehyde 용액으로 소독시 비결핵항산균의 소멸을 기대하려면 적어도 30분 이상 접촉이 필요할 것으로 생각된다. 또한 감염조절 방법을 엄격하게 적용한다 하더라도 오염을 완전히 배제할 수 없으므로, 일반적으로 비병원균으로 알려진 균들이 비통상적으로 갑자가 높은율로 검출되면 위발생을 생각하여야 한다.

• 부모자녀건강학회지
• /
• 제1권
• /
• pp.75-87
• /
• 1998

These days social and economical changes have influence on the structure of family and the role of family members. Working mothers and widowers with children are increasing because of economical difficulties. Support from relatives are decreasing because of the conspicuous trend toward nuclear families. According to these reasons androgynous fathers are required. Today's fathers in Korea socially and culturally have learned about traditional parenting, but they are changing their fathering styles to meet the demands of the times. However they don't have their own fathering models. Therefore nurses who hold an advantageous position to teach and support from clinic have to encourage them to care their infants. The purposes of this study were to define father's care giving in infancy, understand influencing factors on fathering, and the differences between fathering and mothering, then contribute to nursing implementation for supporting fathers. This study was designed to review references about father's care giving. The results were follows: Six aspects of parent participation were direct care. indirect care, play, decision-making concerning the child, amount of time of sole responsibility for the child and overall availability to the child. Direct care involved feeding, bathing, going to child if child awakens. dressing, putting child to bed, taking child to doctor, nurse, or dentist, transporting child to and from sitter, day care, or school, washing child's hair. Indirect care involved cleaning up after child, preparing child's food, fixing child's broken playthings, washing child's clothes, arranging baby-sitting, shopping for child's toys and clothes, transporting baby-sitter to and from your home. Young fathers were gradually participating in direct care like feeding, taking child to doctor. Father's care giving stimulated mothering and promoted parent-infant relationship. Influencing factors of fathering would be divided into father characteristics, surrounding factors, infant attributes. Father characteristics were age, role perception, relationship with parent. Surrounding factors were the opportunity of early contact, support system, spouse's expectation, marital adjustment, feeding type, past experience of care giving. Infant attributes were temperament, behavior, age, sex. The differences between fathering and mothering were reviewed. Fathers were poor at care giving. but their caring was similar to mother's. This subtle difference positively worked upon infant's growth and development. On the basis of these theoretical data, nurses can empower fathers to cooperate with mothers in caring infants.

• 한국보육지원학회지
• /
• 제8권1호
• /
• pp.85-107
• /
• 2012

본 연구는 만화영화 <월-이(Wall-E)>의 의미를 분석하여 유아교육에 대한 시사점을 도출하고자 하였다. 분석방법은 Wolcott(1994)의 개념에 근거한 질적 자료 분석 방법 중 해석적 분석 모형을 사용하여 다음과 같은 연구결과를 도출하였다. 첫째, 지구는 오염되고 파괴되어 버려진 땅으로 나온다. 액시엄은 지구를 파괴한 주체인 나태한 사람들의 안식처로, 선장실은 각성과 변화의 실마리를 얻는 공간이 된다. 둘째, 시간이 지남에 따라 액시엄은 귀환도구로 역할을 하며, 지구는 고향, 터전으로 인식되어 인간이 돌아왔을 때는 희망의 땅이 된다. 셋째, 캐릭터 중 <월-이>는 변화의 주체가 되어 자신뿐 아니라 인간들까지도 변화시킨다. 인간의 욕심은 지구에서의 생태적인 삶을 파괴하였다. 그러나 사람들과 서로 관계 맺고, 지구를 살리는 노력을 한다면 인류를 지속가능한 발전으로 이끌 수 있다. 본 영화를 분석한 결과 생태적 미디어가 가지는 특성인 자연친화 및 예찬, 자연파괴 및 현대문명 비판, 생명의 존엄성, 생태의식 함양, 공존, 공생, 상생의 원리 등의 요소들을 발견할 수 있었고, 유아들의 생명에 대한 감수성을 기르는 데 도움이 될 것으로 기대한다.

• 대한수의학회지
• /
• 제44권1호
• /
• pp.29-40
• /
• 2004

Because cleaning products are part of our everyday lives, it is essential that they should not present significant risks to health. However, many petrochemicals in most soaps and detergents can be absorbed through the scalp and skin and, over time, accumulate in the organs and tissues. This accumulation may result in brain, nerve, and liver damage. Therefore, it is interested in developing non-harmful detergent. According to Korea Research Institute of Chemical Technology, GC-100X may be non-harmful and non-corrosive alkaline ionic water (pH 12). It is composed of hydroxyl radicals and supplemented with xylitol. To evaluate influence of GC-100X on rats and beagles, GC-100X was diluted with distilled water (25%, 50%, and 100% solution respectively). Each of diluted GC-100X was daily treated per oral. In body weight analysis, urinary analysis, ophthalmological test and autopsy, we did not find any significance, but in serum biochemical analysis and hematological analysis, we found some significances in middle dose group compared with control group. These significances in serum biochemical analysis and hematological analysis may be not induced by GC-100X, because it was not found to be significant from control group in histopathological examination. Thus, it is concluded that NOEL(No Observed Effect Level) of GC-100X may be higher than all treatment doses used in this study, and GC-100X may be a non-toxic detergent.

• 한국환경보건학회지
• /
• 제43권2호
• /
• pp.143-156
• /
• 2017

The purpose of this study was to investigate water quality through a field survey at six floor fountain sites. The floor fountain facilities were designed and operated in such a way that tap water was stored in a water tank and recycled repeatedly. The water tank was cleaned once or twice per week in the summer. The number of facility users was low during the day due to sweltering heat, but up to 40 people, mainly children, were using them around 8 pm. Since the operation time was as short as 30 minutes, it is considered necessary to extend it for at least one hour for the number of users. As a result of the water quality test of the reservoir tank prior to operation after cleaning, it was measured to be within drinking water quality standards at the six facilities. As a result of the water quality test after use, ammonia nitrogen was measured to be 1.45 mg/L at Site IV. This exceeded the drinking water quality standard of 0.5 mg/L. In the case of turbidity, two cases exceed at 7.38 and 4.52 NTU when applying 4 NTU as the water quality standard for waterscape facilities. Twenty-eight cases exceed the standard of drinking water quality. The result of microbiological tests, at five sites excepting Site I, where disinfectant was injected, was that the maximum total colony count was 180,000 CFU/mL, total coliforms was 2,100,000 CFU/100 mL, fecal coliforms was 4,600 CFU/100 mL, Escherichia coli was 170 MPN/100 mL and Enterococcus was 100 CFU/100 mL. This exceeded the water quality standards of drinking water. Children are very likely to inhale because the water spews from below and falls from above, so it is necessary to apply water quality standards for ammonia nitrogen, turbidity and microbes. Current floor fountain facilities are highly susceptible to disease caused by microbial contamination because of water cycling and reuse, so it is necessary to change the water every day, clean the water tank, and perform chlorination. Therefore, it is necessary to inject calcium hypochlorite according to the free chlorine water quality standard of swimming pools with a different water tank capacity. In addition, facilities should be improved to prevent the reuse of water by installing the water tank at a separate location.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1999년도 추계학술발표회 초록집
• /
• pp.15-15
• /
• 1999

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the conventional rotating barrel. vibrational barrel (vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components, The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed that the average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value, Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components, However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. $2HD{\;}+{\;}e{\;}{\rightarrow}20H{\;}+{\;}H_2$ Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure thereby resulting to bad plating condition. 1 lot of chip was divided into two equal partion. Each portion was loaded to the same barrel one after the other. Nickel plating and tin-lead plating was performed in the same station. Portion A maintained the normal barrel vibration intensity and portion B vibration intensity was increased two steps higher. All other parameters, current, solution condition were maintained constant. Generally, plating method find procedures were carried out in a best way to maintained the best plating condition. After plating, samples were taken out from each portion. molded and polished. Plating thickness was investigated for both. To check consistency of results. 2nd trial was done now using different lot of another characteristics.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.204-205
• /
• 2011

In thin film silicon solar cells, p-i-n structure is adopted instead of p/n junction structure as in wafer-based Si solar cells. PECVD is a most widely used thin film deposition process for a-Si:H or ${\mu}c$-Si:H solar cells. For best performance of thin film silicon solar cell, the dopant profiles at p/i and i/n interfaces need to be as sharp as possible. The sharpness of dopant profiles can easily achieved when using multi-chamber PECVD equipment, in which each layer is deposited in separate chamber. However, in a single-chamber PECVD system, doped and intrinsic layers are deposited in one plasma chamber, which inevitably impedes sharp dopant profiles at the interfaces due to the contamination from previous deposition process. The cross-contamination between layers is a serious drawback of a single-chamber PECVD system in spite of the advantage of lower initial investment cost for the equipment. In order to resolve the cross-contamination problem in single-chamber PECVD systems, flushing method of the chamber with NH3 gas or water vapor after doped layer deposition process has been used. In this study, a new plasma process to solve the cross-contamination problem in a single-chamber PECVD system was suggested. A single-chamber VHF-PECVD system was used for superstrate type p-i-n a-Si:H solar cell manufacturing on Asahi-type U FTO glass. A 80 MHz and 20 watts of pulsed RF power was applied to the parallel plate RF cathode at the frequency of 10 kHz and 80% duty ratio. A mixture gas of Ar, H2 and SiH4 was used for i-layer deposition and the deposition pressure was 0.4 Torr. For p and n layer deposition, B2H6 and PH3 was used as doping gas, respectively. The deposition temperature was $250^{\circ}C$ and the total p-i-n layer thickness was about $3500{\AA}$. In order to remove the deposited B inside of the vacuum chamber during p-layer deposition, a high pulsed RF power of about 80 W was applied right after p-layer deposition without SiH4 gas, which is followed by i-layer and n-layer deposition. Finally, Ag was deposited as top electrode. The best initial solar cell efficiency of 9.5 % for test cell area of 0.2 $cm^2$ could be achieved by applying the in-situ plasma cleaning method. The dependence on RF power and treatment time was investigated along with the SIMS analysis of the p-i interface for boron profiles.