• 제목/요약/키워드: Cleaning time

검색결과 622건 처리시간 0.021초

상업 운항 중인 대형 컨테이너선의 항차 중 속력 시운전을 통한 선속-동력 특성 연구 Part I (Study on the Speed-Power Characteristics Through a Speed Trial of a Large Container Vessel During a Commercial Voyage Part I)

  • 김호;이준형;장진호;안해성;강대열;변상수
    • 대한조선학회논문집
    • /
    • 제58권6호
    • /
    • pp.366-374
    • /
    • 2021
  • This paper presents the analysis of the speed-power performance in the real sea using a large container vessel data provided as a test bed from a shipping company. To perform a speed trial of the vessel during a commercial voyage, the on-board measuring device and various operation data acquisition systems were mounted on the vessel for long-term performance monitoring and the voyage operated under the container loading condition close to the design draft was adopted. The content of this paper consists of Part I and Part II. Part I, such as this paper, contains the speed trial method and analysis results of the operating vessel. Part II contains the analysis of the speed-power characteristics change over time and before and after hull cleaning using operation data measured from the voyage operated under a condition similar to the speed trial.

Toothpick method(와타나베법)을 이용한 장애인 구강건강관리 효과 (Effect of the tooth pick of the disabled person oral treatment)

  • 오하민;송경희
    • 대한치위생과학회지
    • /
    • 제1권1호
    • /
    • pp.37-46
    • /
    • 2018
  • This study conducted a 'specialist tooth brushing' method against the severely disabled once every other week. The purpose of this study is to analyze and validate the effectiveness of maintaining healthy periodontal management when consistent oral hygiene lasts with minimum stimuli for 24 - months. The conclusions were as follows. Table 2 compares the difference between group 1 and 2 from the 1st to 11th management and verifies the actual difference in measurement of each index. Group 1 used a professional tooth brush while Group 2 used a general brush. There were found many significant differences in dental index. As for PHP, Oral Malodor index and gingival bleeding, it was found that one or two times of dental care can make substantial differences in dental health condition. These results show that as the number of toothbrush method has been increased, gingival bleeding and periodontal index are significantly improved, not to mention the improvement of gingivitis and periodontal disease. This is because periodontal tissue is affected by brushing method, brushing time and consistency of dental care. During the 6-month period, 20 minutes of active periodontal care was intensively conducted, and for 18-months the effect of consistent care was verified by 10-minute periodontal care once every other week. As a result of the test, it was found that there was no complete regression in the basic periodontal treatment and the periodontal health condition had been maintained for 24 months. Also this test shows that, despite of inconsistent dental hygienic care, regular plague control can prevent dental diseases and maintain the dental health. This study proved that periodontal condition can be maintained by periodontal care once every other week as the tooth brushing properly stimulates the gums with positive effect. Therefore, professional dental healthcareworkers should be designated for each facility for the disabled, and dental health of the disabled should be professionally cared on a regular basis, and consistent and repetitive management by the dental care specialist are required.

머신러닝을 활용한 세라믹 정밀여과 파일럿 플랜트의 파울링 조기 경보 방법 (An early fouling alarm method for a ceramic microfiltration pilot plant using machine learning)

  • 탁도현;김동건;전종민;김수한
    • 상하수도학회지
    • /
    • 제37권5호
    • /
    • pp.271-279
    • /
    • 2023
  • Fouling is an inevitable problem in membrane water treatment plant. It can be measured by trans-membrane pressure (TMP) in the constant flux operation, and chemical cleaning is carried out when TMP reaches a critical value. An early fouilng alarm is defined as warning the critical TMP value appearance in advance. The alarming method was developed using one of machine learning algorithms, decision tree, and applied to a ceramic microfiltration (MF) pilot plant. First, the decision tree model that classifies the normal/abnormal state of the filtration cycle of the ceramic MF pilot plant was developed and it was then used to make the early fouling alarm method. The accuracy of the classification model was up to 96.2% and the time for the early warning was when abnormal cycles occurred three times in a row. The early fouling alram can expect reaching a limit TMP in advance (e.g., 15-174 hours). By adopting TMP increasing rate and backwash efficiency as machine learning variables, the model accuracy and the reliability of the early fouling alarm method were increased, respectively.

라이프케어의 피부미용 NCS기반 자격 L3수준의 교육 중요도 연구 (An Importance Analysis on the NCS-Based Skin Care Qualification L3 Level of Education in Life Care)

  • 박채영;박정연
    • 한국엔터테인먼트산업학회논문지
    • /
    • 제13권5호
    • /
    • pp.263-271
    • /
    • 2019
  • 최근 교육훈련기관과 산업체의 수요에 필요한 지식이 불일치하는 인력 미스매치(miss match)의 현상은 신입 직원의 재교육과 취업을 위한 사교육 비용 증가로 전이되어 결과적으로는 개인의 직무수행 능력 저하와 취업 역량 저조는 물론 국가 차원에서도 경제적, 물질적 낭비의 원인이 되고 있다. 이러한 문제점을 보완하기 위해 실무에서 바로 활용이 가능하고 산업체에서 추구하는 인재양성을 목표로 국가에서 지정하는 직무 능력의 표준점을 구한 국가직무능력표준(NCS: National Competency Standards)이 개발되었으며, 이러한 시대적 흐름과 맞물려 NCS를 기반 한 자격제도까지 등장하게 되었다. 따라서 본 연구는 교육기관에서 NCS와 NCS기반 자격에서 제시하고 있는 수준에 맞춰 학교급별로 교육과정을 편성 운영하고 있는 현 시점에서 NCS기반 자격에서 제시하고 있는 수준의 전반적인 점검을 위하여 피부미용 분야 NCS기반 자격 중 피부관리 L3수준의 능력단위와 능력단위 요소의 중요도 및 우선순위를 도출하였으며, 이를 통해 산업계에서 요구하는 직무 수준별 전문인력 양성에 필요한 교육과정 개발의 기초자료로 제공하고자 시도되었다. 본 연구는 현장 전문가집단, 교육 전문가집단으로 구성하였으며, L3수준의 능력단위와 능력단위 요소에 대한 요구분석을 위해 AHP 설문 기법을 실시하였다. 또한 AHP 분석을 위한 통계처리는 데이터 코딩(data coding)과 데이터 크리닝(data cleaning) 과정을 거쳐, SPSS(Statistical Package for Social Science) ver. 21.0 통계 패키지 프로그램과 AHP전용 솔루션인 Expert Choice 2000을 활용하였다. 그 결과 현장 전문가집단, 교육 전문가집단의 의견이 부분적으로 차이를 보였다. 이는 전문적인 능력을 갖춘 현장맞춤형 인재 양성을 목표로 변화하고 있는 현 시점에서, 교육훈련기관과 산업현장의 불일치를 해소해야함을 시사하고 있으며, 해결 방안으로는 산업현장에서 요구하는 인재상과 접목시켜 산업현장의 직무와 교육기관의 표준화된 교육이라 할 수 있다.

담배 사은품 실크 인서트(Silk Inserts)에 관한 연구와 보존처리 (The Study and Conservation of Woven Cigarette Inserts)

  • 이영주
    • 한국의류학회지
    • /
    • 제30권3호
    • /
    • pp.447-457
    • /
    • 2006
  • 본 연구의 목적은 뉴욕의 플리마켓에서 구입한 매우 흥미로운 퀼트 텍스타일을 관찰함으로서 시작되었다. 흔하지 않은 스타일의 실크 인서트(Silk inserts)들로 구성된 이 퀼트를 본 연구자로 하여금 그 역사적 가치를 조명하고 문서기록을 남기며 보존처리하여 텍스타일 역사의 발전에 도움을 주는 것에 의의를 두고 있다. 본 연구의 방법으로는 관련된 문헌고찰과 뉴욕의 메트로폴리탄 박물관 J. R. Burdick 콜렉션을 방문하여 퀼트의 패치들이 silk insert라는 분석을 내렸고 Burdick의 연구(제작연대 1910$\∼$1912)에 의문을 갖고 연구자가 조사를 진행하여 이 연구과제에 사용된 silk inserts의 제작연대가 1934년경부터 1939년경이라는 결론을 내렸다. 다음 단계로는 이 직물의 상태를 분석하였는데, 실크 섬유의 상태가 바느질을 견디지 못하는 상태로 판단해 보존처리 방법으로는 접착제 Elvace 46575(vinyl acetate copolymer resin emulsion)를 Stabiltax에 코팅처리하여 직물을 강화처리하였다. 본 연구는 문서처리 되지 않은 미확인 직물의 역사적 의미 발견과 보존처리를 통해 후대의 텍스타일 연구자들에게 정보를 제공한다는 측면에서 가치가 있다고 사료된다.

프랜차이즈 모기업 핵심역량 자원이 가맹점 관계결속과 재계약의도에 미치는 영향 (Effects of Core Competence and Resource Sharing on the Relational Bond among Franchisees and on Re-contract Intention in the Franchising Parent Companies)

  • 허영욱;주말찬
    • 유통과학연구
    • /
    • 제12권4호
    • /
    • pp.11-22
    • /
    • 2014
  • Purpose - The domestic franchise industry has made significant contributions to industry such as investment, employment, and community economy development, facilitating growth potential. The franchise industry provides management knowhow transfer between parent companies and franchisees as per contracts addressing use of business signs, franchisees' independent position, franchisor support, and royalties to be paid to the franchisors. However, many franchisors lack management knowhow and provide insufficient support because of poor control of franchisees and not having a systematic approach to support. This results in dissatisfied franchisees and failure to establish long-term relationships. Few studies have examined relational commitment and/or re-contract intention by support resources between franchisors and franchisees, despite a considerable output of theories and studies of the growth of the franchise industry. The purpose of this study, therefore, was to examine the effects of the ability to provide resources on relational commitments and re-contract intention, and to suggest causal relationships and implications. Research design, data, and methodology - The subject was domestic franchisors registered with the Association of Franchise with more than 50 franchisees. Franchisees under contract for 2 years and considering re-contract of their franchise 2 years later were used. The subjects totaled 300 franchisees in Seoul. A questionnaire survey was used to investigate the subject of franchisees' concessions during the 10 days from November 21, 2013 to November 30, 2013. After excluding 16 surveys with poor answers, 284 responses were finally used. Four areas and 44 questions were used. A nominal scale was used for four common characteristics questions including gender, ages, educational background, and franchise managing time. Questions regarding ability, relational commitment, and re-contract intention made use of a Likert 5-point scale. Data coding and data cleaning were used. SPSS 18.0 was used as follows. First, frequency analysis was done to investigate demographic characteristics. Second, exploratory factor analysis was done to verify validity of testing tools, and Cronbach's α coefficient was used to verify reliability. Third, correlation analysis and multiple regression analysis were done. An exploratory factor analysis was done to verify validity of concepts. A correlation analysis was done to test relationships between the variables, and multiple regression analysis was done to verify franchisor's ability, franchisees' relational commitment, and re-contract intention. Results - The following were the outcomes. First, store operation management, finance operation management, and human resource management affected the calculated bond. Second, store operation management and finance operation management affected the emotional bond. Third, store operation management, finance operation management, human resource management, and marketing management affected the prescriptive bond. Fourth, calculated bond and prescriptive bond had an effect on re-contract intention. Conclusions - As stated above, in franchise management, parent companies' offer and instruction of core competence to their franchisees as an information resource could improve the relational bond by helping them grow together through the resource sharing. Consequently, core competence factors were promoting factors that could improve franchisees' re-contract intention for a long time.

D정수장 정밀여과막 실증플랜트의 최적 운전조건 연구 (A Study on Operating Condition of Test-Bed Plant using Membrane filtration of D Water Treatment Plant in Gwang-Ju)

  • 양형재;이승훈;문경란
    • 대한환경공학회지
    • /
    • 제39권3호
    • /
    • pp.155-163
    • /
    • 2017
  • 최근 막여과 공정은 입자상 물질뿐만 아니라 Giardia, cryptosporidium과 같은 병원성미생물이 효과적으로 제거됨에 따라 국내외 적용성이 확대되는 추세이다. 본 연구는 광주광역시 D정수장의 원수 침전상등수의 처리를 위해 $120m^3/d$ 처리규모의 Pilot Plant (2014. 1월부터 운영)와 $2,500m^3/d$ 처리규모의 실증실험시설(2015. 1월부터 운영)의 막여과 공정을 운영하면서 최적 운전조건과 한계여과속도를 찾고자 하였다. 정밀여과막의 Pilot-test에서 얻어진 운전모드는 유입 1.0분, 여과 36.5분, 공기역세 0.9분, 역세 1.0분, 배출 1.0분이었으며, 이를 적용하여 실증실험을 하였다. 한계여과속도(critical flux)는 Pilot 운전에서 Flux 20, 40, 56 및 62 LMH일 때의 시간의 변화에 따른 막간차압의 증가식을 기반으로 $50L/m^2-h$로 산정(TMP 0.5bar 이내)되었다. 화학세정은 1차로 산세정 2회, 2차로 알칼리 세정을 하여 95%의 회복율을 얻었다. 이러한 적정 조건으로 운전한 결과 처리수의 탁도는 봄 여름 가을 겨울 평균 각각 0.028, 0.024, 0.026 및 0.028 NTU, 연평균 탁도는 0.026 NTU로, 탁도 제거율은 98.4%로 나타났다. 광주광역시 D정수장의 원수 침전상등수를 1일 $2,500m^3$ 처리하는 실증실험시설 운영을 통해 부유고형물 및 콜로이드성 물질을 제거하는데 탁월한 처리성능을 확인하였고, 일반적인 모래여과공정을 대체할 수 있는 적정운영기술이 확보되었다.

세라믹 한외여과 및 광촉매 혼성공정에 의한 고탁도 원수의 고도정수처리: 1. 광촉매 및 물역세척 조건의 영향 (Advanced Water Treatment of High Turbidity Source by Hybrid Process of Ceramic Ultrafiltration and Photocatalyst: 1. Effects of Photocatalyst and Water-back-flushing Condition)

  • 고사총;박진용
    • 멤브레인
    • /
    • 제21권2호
    • /
    • pp.127-140
    • /
    • 2011
  • 본 연구에서는 정수처리용 세라믹 한외여과 및 광촉매의 혼성공정에서 $TiO_2$ 광촉매 코팅 구(bead)의 농도 및 물역세척 주기(FT), 물역세척 시간(BT) 변화의 영향을 알아보았다. 광촉매 코팅 구의 농도는 10~40 g/L로, FT는 2~10분으로, BT는 6~30초로 변화시키면서, 그 영향을 180분 운전 후 막오염에 의한 저항$(R_f)$, 투과선속(J)과 총여과부피$(V_T)$ 측면에서 고찰하였다. 광촉매 코팅 구의 농도가 감소할수록 $R_f$는 증가하고 J는 감소하였다. 광촉매 코팅 구의 농도 40 g/L 에서 $V_T$가 8.85 L로 가장 높았다. FT 변화 실험에서는 FT가 감소할수록, $R_f$는 감소하고 J는 증가하였다. 한편, BT 변화 실험에서는 BT가 증가할수록, $R_f$는 감소하고 J는 증가하였다. 또한, NBF(no back-flushing)에서 급격한 막오염에 의한 분리막 기공의 감소로 탁도 및 용존유기물($UV_{254}$ 흡광도)이 효과적으로 제거되었기 때문에, 탁도 및 용존유기물의 처리효율이 NBF 조건에서 가장 높았다. 한편, 광촉매 코팅 구의 세척 효과로 FT가 감소할수록, BT가 증가할수록 탁도 및 용존유기물의 처리효율은 증가하였다.

양송이에서 포식성 스키미투스응애 (Stratiolaelaps scimitus)를 이용한 버섯응애류의 생물적 방제 효과 (Biological control of mushroom mites using predatory mite Stratiolaelaps scimitus in button mushroom (Agaricus bisporus) cultivation)

  • 윤정범;김동환;양창열;서미혜;김형환
    • 한국버섯학회지
    • /
    • 제15권4호
    • /
    • pp.254-258
    • /
    • 2017
  • 과거 돌발적으로 피해를 주었던 버섯응애류가 최근 양송이 주산지를 중심으로 빈번하게 발생하여 피해 농가가 확산되고 있다. 버섯응애류 방제용으로 등록된 약제는 아직까지 없으며 적용 가능한 살충제가 있다고 하더라도 잔류 문제로 인하여 사용 시기에 제약이 많아 방제에 어려움이 있다. 따라서 양송이 생장에는 영향이 없이 안전하면서 버섯파리, 버섯응애류만 선택적으로 방제할 수 있는 친환경 방제기술 개발이 절실하다. 본 연구에서는 버섯파리를 포식하는 포식성 천적 응애 스키미투스응애를 이용한 버섯응애류의 생물적 방제효과를 검정하였다. 그 결과 스키미투스응애 30,000마리(3병)를 재배사 $165{\sim}230m^2$ 기준으로 균상 준비 전 물청소 후 1회, 균 접종 후 1회, 복토 전후 1회 등 3회를 1~2 m 간격으로 골고루 균상 위에 처리하면 버섯응애류 방제를 효과적으로 할 수 있을 것으로 판단되며 스키미투스응애의 처리만으로 양송이의 주요 해충인 버섯파리의 알, 유충, 번데기, 버섯응애류를 동시에 방제할 수 있으며 작기 중 사용 시기에 구애받지 않고 사용할 수 있는 것이 장점이다.

3D CAD 모델 기반 해양플랜트 배관 공정 모니터링 시스템 개발 (A Development of Offshore plant Piping Process Monitoring System Based on 3D CAD Model)

  • 김현철;이규홍
    • 한국산학기술학회논문지
    • /
    • 제21권2호
    • /
    • pp.58-65
    • /
    • 2020
  • 3D CAD 시스템으로 설계된 해양플랜트 배관재 모델들은 2D 배관 제작도와 설치도의 형태로 생산 공정에 제공되고, 기본 엔지니어링 정보와 함께 통합 공정관리시스템에서 원자재의 구매, 조달, 제작, 설치 및 검사가 체계적으로 관리되어 진행된다. 기존의 통합 공정관리시스템은 자원의 흐름 및 진행 상황을 체계적으로 관리하여 공정 시수 절감에 많은 기여를 하고 있지만, 3D 설계 형상 모델 정보를 포함하고 있지 않기 때문에 배관 설치 작업 전에 복잡한 배관 구조를 파악하거나, 잦은 설계 변경으로 인해 연관된 도면을 찾을 때 상호간 신속한 정보 교류가 어려운 단점을 가지고 있었다. 이러한 문제점을 해결하기 위해 3D 모델을 기반으로 하는 해양플랜트 배관 공정 모니터링 시스템을 개발하였다. 본 시스템은 3D 모델 기반 배관 모니터링 시스템은 Visual Studio 2017 C#과 UNITY3D를 기반으로 배관 공정 작업 정보가 3D CAD 모델과 실시간 연동될 수 있도록 구성하였다. 그리고 블록, 크기, 재료에 따른 배관 설치 공정 진행 흐름 뿐만 아니라, 청소, 수압검사, 공압검사 등 기능 검사 항목별 진행 흐름을 3D 모델상에서 실시간으로 확인할 수 있도록 하였다. 작업자는 개발된 시스템을 통해 생산 현장에서 실시간으로 배관 공정 진행 흐름을 포함한 3D CAD 모델을 쉽게 파악함으로써 작업 효율성 향상에 많은 기여를 할 것으로 기대된다.