• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.849-854
• /
• 2003

The Korea Atomic Energy Research Institute has developed a teleoperated cleaning robot for use in the radioactive zone of the isolation room of the Irradiated Material Examination Facility where direct human access to the interior is strictly limited. The teleoperated cleaning robot that was designed to completely eliminate human interaction with the hazardous radioactive contaminants has five remotely replaceable submodules - a mobile module for navigation, a cleaning module for dislodging and sucking contaminated waste, a sensing module for obstacle avoidance, a collection module for storing the acquired waste, and a cover module for protecting the collection module. This cleaning robot is capable of cleaning the contaminated floor surface of the isolation room and collecting loose dry spent nuclear fuel debris and other radioactive waste fixed or scattered on the floor surface. The developed cleaning robot is operated either by a manual control or by autonomous control in conjunction with a graphical simulator, by which the human operator can monitor and intervene the robot performing cleanup tasks in the isolation room. In this paper, we present the mechanical and environmental design considerations and development of the teleoperated cleaning robot for radioactive isolation room use. We also demonstrate its mock-up performance test results from the viewpoint of a remote cleanup operation and remote maintenance.

• Journal of KIISE:Software and Applications
• /
• v.35 no.5
• /
• pp.297-305
• /
• 2008

We present a cleaning robot algorithm that can be implemented on low-cost robot architecture while the cleaning performance far exceeds the conventional random style cleaning through human-robot interaction. We clarify the advantages and disadvantages of the two notable cleaning robot styles: the random and the mapping styles, and show the possibility how we can achieve the performance of the complicated mapping style under the random style-like robot architecture using the idea of human-aided cleaning algorithm. Experimental results are presented to show the performance.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.4
• /
• pp.553-561
• /
• 2009

This paper presents development of ROV-type underwater robot capable of cleaning ship hull in automatic mode. The purpose of developing this robot is for underwater cleaning to secure the safety of divers who inspect and clean the ship hull. The robot consists of the cleaning system with rotating brush mechanism, a car-like driving mechanism, inspection system using video, and overall control system for underwater communication and operation. In this paper, we present overall design process of the cleaning system and operating system and technical contents of the overall control system for the underwater cleaning robot.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.272-273
• /
• 2017

As businesses put a greater emphasis on outward appearances, the demand for external window cleaning has been on the rise. However, with the conventional labor-intensive window cleaning method, it is hard to meet this demand. Therefore, this study proposes a Life Cycle Cost (LCC) analysis model for a guiderail-type cleaning robot, and estimate the LCCs of the conventional method and the cleaning robot. The findings of this research are expected to serve as a guide for future development of a cleaning robot.

• The Journal of Korea Robotics Society
• /
• v.5 no.3
• /
• pp.209-215
• /
• 2010

This paper presents a graphic user interface system consisting of graphic simulator and remote control system for a building cleaning robot. It provides a tool of convenient 3D graphical map construction for real world. The 3D map is reconstructed from existing 2D building CAD data with DXF format by using OpenGL graphic API. Through this system, graphic display of robot's status information, remote control and cleaning scheduling can be done for a building cleaning robot. This proposed system is expected to give efficient way of graphic simulation and remote monitoring and control system for a building cleaning robot.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.224-225
• /
• 2013

Most of the building exterior wall cleaning robots use a water jet device for spraying water. However this method is sprayed excessive water usage than water quantity required for cleaning. And setting weight of the water pump cleaning device increase the weight of the building exterior wall cleaning robot. Therefor, this paper suggest that the mechanisms scatter minimal cleaning water using a spinning device of the building exterior wall cleaning robot.

• The Journal of Korea Robotics Society
• /
• v.17 no.3
• /
• pp.381-386
• /
• 2022

We develop a business model for facade cleaning service robot system that provides service by meeting the market needs and environments. The size of the facade cleaning market is growing rapidly in recent years due to the increasing importance of indoor space and the modern trend of building construction methods. Also, maintenance of exterior appearance of buildings has become an important factor in residential and commercial facilities. Though demand for facade cleaning services is rising, the current facade cleaning services are performed dangerously in a human labor-dependent way. It is desirable that the existing human resource service should be replaced with robot-based services. In addition, quantitative analysis of rental pricing model was conducted to propose effective launch of products to the market. The robot system is economically attractive from the consumer's point of view. When the actual facade cleaning robot service is released, it is expected that verification of the business models and more accurate analysis with specific figures can be performed.

• Journal of Power System Engineering
• /
• v.21 no.3
• /
• pp.74-84
• /
• 2017

This paper presents the development of the underwater cleaning robot platform for a higher efficiency in manufacturing industry. Human operators directly go into the cistern and clean sludge after drainage of the water so far. It is sometimes dangerous because of the harmful chemical materials from the product making process. In addition, it takes long time for water drainage and supplying it back. However, the robot cleaning operation does not need to drain water so that it could be applied to the sludge cleaning work at any time without the plant pause. Moreover, it can prevent the safety accidents because human operators are not necessary to enter directly the sludge cisterns. This paper shows the performance of cleaning work that can be applied in the industrial field through the design and development of underwater cleaning robot platform. And these results demonstrate that the developed underwater cleaning robot has great possibilities to clean other industrial water cisterns.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05b
• /
• pp.89-90
• /
• 2011

External wall cleaning is a task that is currently being performed by human workers. The recent surge in the number of high-rise buildings has led to such problems as difficulties in cleaning the wall, high risk to the specialized workers, and increased maintenance expenses. As a fundamental measure to perform external wall cleaning work in a safer manner, automation/mechanization has been on the rise. This research aims to classify façade types and analyze the performance requirements of a wall-cleaning robot, as preliminary research to develop a wall-cleaning robot. The replacement of specialized workers with robots is expected to improve both safety for workers and quality of cleaning.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.203-204
• /
• 2017

In case of developing a guide-rail type window cleaning robot, only the first prototype has been developed. In this study, it was considered that the size and the load of the window cleaning robot was not optimized, and through the structural analysis of the self-weight of the window cleaning robot, the stress concentration area was derived and the concentrated stress was quantified. Analysis showed that the upper rail shaft had a bending stress of 9.964Mpa and the bolt had a shear stress of 19.544Mpa. The results of this study will be used as basic data for designing future prototypes.