• The korean journal of orthodontics
• /
• v.43 no.6
• /
• pp.279-287
• /
• 2013

Objective: To investigate the dentoskeletal factors which may predict soft-tissue chin strain during lip closure. Methods: The pretreatment frontal and lateral facial photographs and lateral cephalograms of 209 women (aged 18-30 years) with Angle's Class I or II malocclusion were examined. The subjects were categorized by three examiners into the no-strain and strain groups according to the soft-tissue chin tension or deformation during lip closure. Relationships of the cephalometric measurements with the group classification were analyzed by logistic regression analysis, and a classification and regression tree (CART) model was used to define the predictive variables for the group classification. Results: The lower the value of the overbite depth indicator (ODI) and the higher the values of upper incisor to Nasion-Pogonion (U1-NPog, mm), overjet, and upper incisor to upper lip (U1-upper lip, mm), the more likely was the subject to be classified into the strain group. The CART showed that U1-NPog was the most prominent predictor of soft-tissue chin strain (cut-off value of 14.2 mm), followed by overjet. Conclusions: To minimize strain of the soft-tissue chin, orthodontic treatment should be oriented toward increasing the ODI value while decreasing the U1-NPog, overjet, and U1 upper lip values.

• The korean journal of orthodontics
• /
• v.24 no.3 s.46
• /
• pp.535-546
• /
• 1994

The research work has been conducted in order to establish facts on posterior available space in patients with crowding. The relation between crowding and posterior available space was worked out through a cross sectinal study of fifty eight patients showing class I malocclusion. In addition, a longitudinal overlapping study was done by examing twenty patients who had their bicuspid extracted and forty nine patients who did not, at the orthodontic department of dental clinic affiliated in Chosun University. The patients had been examined for three years and eight months on a regular basis, and the study yielded the following conculusion. 1. There was a great difference in posterior available space between patients with serious crowding and those with slight crowding. The former marked 15.2mm of posterior available space and the latter 19.9mm. 2. Posterior crowding index was acquired by joint consideration of the diameter of posterior teeth and posterior available space, and manifested the highest relationship with crowding among measured items. 3. Patients who had their bicuspids extracted exhibited increase in posterior available space of 1.6mm/year and those who did not 1.8mm/year. 4. The absorption of anterior border of ramus turned out to be most deeply related with the increase of posterior available space. 5. Anterior border of ramus was absorbed at the average rate of 0.7mm/year during the period of observation. 6. The extraction of bicuspids had little influnce on the change in posterior available space.

• The korean journal of orthodontics
• /
• v.24 no.3 s.46
• /
• pp.547-554
• /
• 1994

This study was carried out in order to find out the soft tissue profile changes associated with maxillary incisor retraction in Angle's class I malocclusion patients. For this study fifty two female adult patients (Maximum Retraction Group 23, Minimum Retraction Group 29) who received orthodontic treatment were chosen. Following conclusions were obtained by analysing the changes of soft tissue and hard tissue before and after treatment. 1. When considering the mean changes of soft tissue and hard tissue, UP, LIP, Ls, Li (p<0.001), Point B, Si (p<0.01), Point A, Ss (p<0.05) were significant posterior movement in Maximum Retraction Group and UIP (p<0.001), LIP, Ls, Li (p<0.01), Point B, Si (p<0.05) were significant posterior movement in Minimum Retraction Group. 2. When considering the correlations between hard tissue and soft tissue changes, greater correlations were found in Minimum Retraction Group between UIP and Ls (p<0.01), Point A and Ss, UIP and Li, Point B and Si (p<0.05) than Minimum Retraction Group. 3. Correlations (p<0.01) were found between upper incisor retraction and posterior movement of the upper and lower lip in Thin Lip-Thickness Group, whereas no significant correlations were found in Thick Lip-Thickness Group. 4. Mean changes of the soft tissue thickness subsequent to incisor retraction were increased (p<0.01) in upper lip (Ls-Ls'), whereas no changes were found in lower lip.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.3
• /
• pp.180-185
• /
• 2012

Purpose: An accurate preoperative analysis of the patient is essential in orthognathic surgery in order to acquire superior results. In profile, the location of the chin's position may change according to the neck's inclination. This may ultimately affect the amount of surgical movement. During acquisition of cephalometric radiographs, or in supine position, there is a discrepancy in the neck's inclination. This means that there are also various discrepancies between the actual profile and the various preoperative profile images. In the clinical situation, the decision in performing genioplasty usually lies in the analysis of the patient's profile on the operating table at the final stages of orthognathic surgery. This study aims to analyze the different preoperative profile images and to compare their discrepancies. Methods: Fifty eight patients undergoing orthognathic surgery were chosen. These patients were divided into three groups according to angle's classification of malocclusion, as class I, II or III. The right profile of these patients in centric occlusion was taken in natural head position (NHP). This was set as the 'actual profile image.' Another right profile image was taken on the operating table after insertion of the nasotracheal intubation and with muscle relaxants in effect. This was also taken in centric occlusion. The angle (denoted 'A') between the soft tissue glabella-pognion and the true vertical plane was found in the above-mentioned profile images and in the cephalometric radiographs. The differences of these values were analyzed. Results: There were differences in Angle 'A' in all of the preoperative images. These values were however, not statistically significant. Conclusion: In order to gain an esthetic profile during orthognathic surgery, the NHP is shown to be the most reliable position. Images reproducing such head positions should be used in the treatment planning process.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.3
• /
• pp.218-224
• /
• 2011

Purpose: The purpose of this study is to evaluate the post-operative skeletal stability after surgical correction of patients with mandibular prognathism by bilateral sagittal split ramus osteotomy (BSSRO) and to evaluate the horizontal relapse tendency after the surgery. Methods: Twenty-six patients with Class III dental and skeletal malocclusion were selected for this retrospective study. Fifteen of them underwent BSSRO for mandibular setback and eleven of them underwent two-jaw surgery (Lefort I and BSSRO). In each patient, lateral cephalometric radiographs were taken pre-operatively, post-operatively within 1 week, and post-operatively after eight months. After tracing of the cephalometric radiographs, various parameters were measured. The analyses were done by linear measurement to evaluate the change in position of hard tissue B point, pogonion and mandibular plan angle by examination on lateral cephalograms. Results: The horizontal relapse rate was 27.1% at B point and 31.6% at pogonion in patients who underwent BSSRO. The horizontal relapse rate of the group where the amount of correction exceeded 10 mm was 25.69% at B point. Conclusion: There were no statistical differences on the magnitude of setback and direction of rotation of the mandible in mandibular stability. There were also no statistical differences between single mandibular surgery and two-jaw surgery for mandibular stability.

• Journal of Digital Convergence
• /
• v.15 no.10
• /
• pp.307-314
• /
• 2017

In this study, a minimum amount of the vertical occlusion was secured differently in each type of mandibular advance devices snoring and Class I malocclusion patients wore these devices. This study analyzes, after the use of devices, a different amount of the vertical occlusion results in a change of the area of upper airway by additional changes such as mandibular position, muscle changes, tongue position. The higher the vertical amount, the area of the upper airway was shown smaller, And if the patient's tongues was prevented from the distal movement, the area of the upper airway had increased, To reduce snoring, doctors should accurately diagnose patients' occlusal relationships and select a MAD snoring that is appropriate for the occlusion. The dental technician who builds the selected device should also consider design settings such as the amount of vertical occlusion, the finish lines, and the thickness of the device to increase the effectiveness of the device.

• Korean Journal of Cleft Lip And Palate
• /
• v.12 no.2
• /
• pp.85-94
• /
• 2009

Cleft lip and palate patients show midface hypoplasia, maxillary hypoplasia due to scar of previous surgery, and manifest as a class III malocclusion, retruded midface and shallow palate. These deformities have been treated with traditional orthognathic surgery. Although conventional Le Fort I osteotomy was performed on most cleft patinets with midface hypoplasia, it showed limited amount of maxillary advancement and high relapse tendency. Recently, when great amount of advancement are required in severe maxillary hypoplasia, distraction osteogenesis using RED system is widely used. But, several months of consolidation period is needed after distraction osteogenesis, occlusal relationship is not stable until mandibular setback surgery has done in mandibular hyperplasia cases and during these period, patients may feel discomfort. We present clinical cases of immediate rigid internal fixation after completion of maxillary distraction using RED system and simultaneous mandibular setback procedure in adult cleft and lip patients who show both maxillary hypoplasia and mandibular prognathism.

• The korean journal of orthodontics
• /
• v.45 no.1
• /
• pp.3-12
• /
• 2015

Objective: We compared the skeletal and dental changes that resulted from the use of two methods of intermaxillary fixation (IMF)-miniscrews and surgical archwire-in 74 adult patients who had Class III malocclusion and were treated with the same orthognathic surgical procedure at a hospital in Korea. Methods: All the patients underwent Le Fort I osteotomy and bilateral sagittal split ramus osteotomy with rigid fixation. They were divided into two groups according to the type of IMF used-group 1 underwent surgical archwire fixation and group 2 underwent orthodontic miniscrew fixation. In a series of cephalograms for each patient, we compared vertical and horizontal tooth-position measurements: (a) immediately after surgery ($T_0$), (b) 3 months after surgery ($T_1$), and (c) 6 months after surgery ($T_2$). Cephalometric changes within each group were examined using one-way analysis of variance (ANOVA) while the independent samples t -test procedure was used to compare the two groups. Results: After surgery, the maxillary incisors tended to be proclined in both groups although there were no significant differences. Incisor overbite increased significantly in both groups from $T_0$ to $T_1$, and the miniscrew group (group 2) showed slightly greater overbite than the archwire group (group 1). Conclusions: This study suggest that the use of orthodontic miniscrews and orthodontic surgical archwire for IMF in adult patients results in similar skeletal and dental changes.

• The korean journal of orthodontics
• /
• v.48 no.3
• /
• pp.153-162
• /
• 2018

Objective: The aim of this trial was to compare the alignment efficiency and intermaxillary arch dimension changes of nickel-titanium (NiTi) or copper-nickel-titanium (CuNiTi) round archwires with increasing diameters applied sequentially to the mandibular arch. Methods: The initial alignment phase of fixed orthodontic treatment with NiTi or CuNiTi round archwires was studied in a randomly allocated sample of 66 patients. The NiTi group comprised 26 women, 10 men, and the CuNiTi ($27^{\circ}C$) group comprised 20 women, 10 men. The eligibility criteria were as follows: anterior mandibular crowding of minimum 6 mm according to Little's Irregularity Index (LII), treatment requiring no extraction of premolars, 12 to 18 years of age, permanent dentition, skeletal and dental Class I malocclusion. The main outcome measure was the alignment of the mandibular anterior dentition; the secondary outcome measure was the change in mandibular dental arch dimensions during 12 weeks. Simple randomization (allocation ratio 1:1) was used in this single-blind study. LII and mandibular arch dimensions were measured on three-dimensional digital dental models at 2-week intervals. Results: No statistically significant difference was observed between NiTi and CuNiTi according to LII (p > 0.05). Intercanine and intermolar arch perimeters increased in the CuNiTi group (p < 0.001). Inter-first premolar width showed a statistically significant interaction in week ${\times}$ diameter ${\times}$ application (p < 0.05). Conclusions: The effects of NiTi and CuNiTi round archwires were similar in terms of their alignment efficiency. However, the intercanine and intermolar arch perimeters, and the inter-first premolar width changes differed between groups.

• The korean journal of orthodontics
• /
• v.43 no.1
• /
• pp.42-52
• /
• 2013

The aim of this paper was to propose a new method of bimaxillary orthognathic surgery planning and model surgery based on the concept of 6 degrees of freedom (DOF). A 22-year-old man with Class III malocclusion was referred to our clinic with complaints of facial deformity and chewing difficulty. To correct a prognathic mandible, facial asymmetry, flat occlusal plane angle, labioversion of the maxillary central incisors, and concavity of the facial profile, bimaxillary orthognathic surgery was planned. After preoperative orthodontic treatment, surgical planning based on the concept of 6 DOF was performed on a surgical treatment objective drawing, and a Jeon's model surgery chart (JMSC) was prepared. Model surgery was performed with Jeon's orthognathic surgery simulator (JOSS) using the JMSC, and an interim wafer was fabricated. Le Fort I osteotomy, bilateral sagittal split ramus osteotomy, and malar augmentation were performed. The patient received lateral cephalometric and posteroanterior cephalometric analysis in postretention for 1 year. The follow-up results were determined to be satisfactory, and skeletal relapse did not occur after 1.5 years of surgery. When maxillary and mandibular models are considered as rigid bodies, and their state of motion is described in a quantitative manner based on 6 DOF, sharing of exact information on locational movement in 3-dimensional space is possible. The use of JMSC and JOSS will actualize accurate communication and performance of model surgery among clinicians based on objective measurements.