• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.442-445
• /
• 1987

In this paper, a new ARMA spectrum estimation algorithm based on Circular Lattice filter is presented. Since APMA model is used in signal modeling, high-resolution spectrum can be obtained. And the computational burden is reduced by using Circular Lattice filter. By modifying the input estimation part of other proposed methods, we can get high-resolution spectrum with less computation and less memory compared with other Lattice methods. Some computer simulations are performed.

• Transactions of Materials Processing
• /
• v.8 no.5
• /
• pp.520-526
• /
• 1999

In this study a practical formula based on the experime수 랙 the estimation of load in the non-circular tube extrusion with the mandrel is proposed by using the effective extrusion ratio. Through some experiments for the several shaped sections, the coefficients of the empirical equation are determined by ticine as a model material at room temperature. The proposed empirical formula for the estimation of extrusion load will be applicable to the non-steady state as well as steady state for the extrusion of various shaped tubes from hollow billets.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.12
• /
• pp.1934-1939
• /
• 1989

The circular microstrip resonator which can be exactly performed with theoretical resonant frequency using the conception of dynamic effective relative dielectric constants is analyzed in this paper. The formula of exact resonant frequency of resonator, in this study, is estabilished by effective resonator dimension and dynamic relative dielectric constant. The measurement of transmission type circular resonator which fabricated by AL2O3 and Epsilam-10 is to prove that the experimental results are more agreed a well with the simulated values by this new method than the simple resonator model.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.2
• /
• pp.110-119
• /
• 2000

In this study, we considered the method evaluation the flexibility of joint area including member with circular section. We regarded the flexibility of joint area as translational and rotational springs for the purpose of expressing local deformation. We verified this method by the use of normal mode analysis. We also calculated this joint area occurring in penetration so as to apply this method to other cases. Compare with the shell element model. we can the considerably approximate values.

• Structural Engineering and Mechanics
• /
• v.24 no.4
• /
• pp.411-427
• /
• 2006

The Discrete Element Method, DEM, is increasingly used in fracture studies of non-homogeneous continuous media, such as rock and concrete. A 2D circular rigid DEM formulation, developed to model concrete, has been adopted. A procedure developed to generate aggregate particles with a given aspect ratio and shape is presented. The aggregate particles are modelled with macroparticles formed by a group of circular particles that behave as a rigid body. Uniaxial tensile and compression tests performed with circular and non-circular aggregates, with a given aspect ratio, have shown similar values of fracture toughness when adopting uniform strength and elastic properties for all the contacts. Non-circular aggregate assemblies are shown to have higher fracture toughness when different strength and elastic properties are set for the matrix and for the aggregate/matrix contacts.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.609-612
• /
• 2003

For combating multipath fading in wireless radio environment, diversity schemes is useful. In this paper, for performance improvement of polarization diversity system, we analyzed a two-branch polarization diversity at the receiving end of a mobile link when the transmitter emits a circularly polarized wave. And In order to calculate the correlation coefficient considering the XPD(cross polarization discrimination) between the received signals for the two diversity branches, a simple theoretical model of circular polarization diversity is adopted and calculate correlation coefficient. From the analysis results, it is seen that the correlation coefficient of circular polarization diversity evaluated by the XPD is less than that of vertical polarization diversity. And also, we designed and fabricated circular polarization diversity system with microstrip antenna. we analyzed data measured in indoor NLOS environment using fabricated circular polarization diversity system. From the measurement results, it is clearly seen that the diversity effect of circular polarization diversity system is higher 3dB than vertical polarization diversity system.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.6
• /
• pp.491-498
• /
• 2011

The structural vibration due to earthquake or outside impact causes serious problem for building safety. A dynamic model of a friction damper which can be constructed and installed easily is needed to reduce the vibration of the building. In this paper, the experimental equation of a circular friction damper is derived and designed for reduction of a earthquake vibration of a building. The developed experimental equation is defined to simply design the capacity on design of the circular friction damper based on the results of the performance test. Finally this experimental equation can be used for the design of a circular friction damper.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.3 s.258
• /
• pp.273-282
• /
• 2007

Numerical calculations are carried out for the natural convection induced by temperature difference between a cold outer square cylinder and a hot inner circular cylinder. A two-dimensional solution for unsteady natural convection is obtained, using the immersed boundary method (IBM) to model an inner circular cylinder based on finite volume method, for different Rayleigh numbers varying over the range of $10^4\;to\;10^6$. The study goes further to investigate the effect of an inner cylinder location on the heat transfer and fluid flow. The location of inner circular cylinder is changed vertically along the center-line of square enclosure. The number, size and formation of cell strongly depend on Rayleigh number and the position of inner circular cylinder. The changes in heat transfer quantities have been presented.

• Journal of electromagnetic engineering and science
• /
• v.4 no.3
• /
• pp.128-136
• /
• 2004

In this paper,. with the aim of achieving the expected performance improvement for a polarization diversity system, we analyzed two-branch polarization diversity at the receiving end of a mobile link which a transmitter emits circularly polarized wave. In this analysis, to calculate the correlation coefficient considered by XPD(cross polarization discrimination) between the two received signals, a simple theoretical model of circular polarization diversity is adopted. From the analysis results, it is clearly seen that the correlation coefficient of circular polarization diversity evaluated by the XPD is less than that of conventional linear polarization diversity. And also, we designed and implemented a circular polarization diversity system with micro-strip antenna. By using the circular polarization diversity system, we analyzed the measured data in indoor NLOS(Non-Line-Of-Sight) environments. From this analysis results, it is also clearly seen that the diversity effect of circular polarization diversity system shows better performance compared to the conventional linear diversity system by about 3 dB high.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.19 no.1
• /
• pp.69-81
• /
• 2015

The present paper deals with the determination of temperature, displacement and thermal stresses in a semi-infinite hollow circular disk due to internal heat generation within it. Initially the disk is kept at arbitrary temperature F(r, z). For times t > 0 heat is generated within the circular disk at a rate of g(r, z, t) $Btu/hr.ft^3$. The heat flux is applied on the inner circular boundary (r = a) and the outer circular boundary (r = b). Also, the lower surface (z = 0) is kept at temperature $Q_3(r,t)$ and the upper surface ($Z={\infty}$) is kept at zero temperature. Hollow circular disk extends in the z-direction from z = 0 to infinity. The governing heat conduction equation has been solved by using finite Hankel transform and the generalized finite Fourier transform. As a special case mathematical model is constructed for different metallic disk have been considered. The results are obtained in series form in terms of Bessel's functions. These have been computed numerically and illustrated graphically.