• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1999.10a
• /
• pp.162-169
• /
• 1999

Intentionally weakened girders near the beam-to-colum connection lead ductile failures at the weakened points prior to potential brittle failure at the connection points subjected to strong earthquake. Recent research investigated cyclic behavior of composite beams with a rectangular web opening and find out ductile failure of such beams due to plastic hinge formation of T-section at the four corners of the rectangular opening. But eventual failures of T-sections are resulted from local buckling of T-section having a narrow stem and a narrow bound of plastic hinge formation. This continuing research proposes double-circular opening instead of rectangular one in ofter to improve energy dissipation capacity as well as composite beam strength, Experimental test of two specimens was carried out and its results are compared with those of nonlinear finite element analyses

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.4
• /
• pp.183-190
• /
• 2000

It is well-known that the poles of a system are closely related with the dynamics of the systems, and the pole assignment problem, which locates the poles in the desired regions, in one of the major problem in control theory. Also, it is always possible to assign poles to specific points for exactly known linear systems. But, it is impossible for the uncertain linear systems because of the uncertainties that originate from modeling error, system variations, sensing error and disturbances, so we must consider some regions instead of points. In this paper, we consider both the analysis and the design of robust pole assignment problem of linear system with time-varying uncertainty. The considered uncertainties are the unstructured uncertainty and the structured uncertainty, and the considered region is the circular region. Based on Lyapunov stability theorem and linear matrix inequality(LMI), we first present the analysis result for robust pole assignment, and then we present the design result for robust pole assignment. Finally, we give some numerical examples to show the applicability and usefulness of our presented results.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.3
• /
• pp.7-11
• /
• 2009

In this paper, we developed and presented a design result for optimizing the geometry of Ag circular SPP waveguide for subwavelength waveguide applications. We investigated the effect of the design parameters on the light propagation and find the optimum design for small modal size, high coupling coefficient, and low sensitivity. The results show that the globally optimal design locates optimal waveguide geometries more efficiently than individual optimal points for multivalued objective function.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.4
• /
• pp.59-66
• /
• 2004

We define a SG(String Graph) and an ASG(Alive String Graph) to the purpose to do static analysis. For a life and death judgment, we apply the rule to the situation which the stone is included and not included. We define the rules that are SR(String Reduction), ER(Empty Reduction), ET(Edge Transform), and CG(Circular Graph), when the stone is not included. We define the rules that are DESR(Dead Enemy Strings Reduction) and SCSR(Same Color String Reduction), when the stone is included. We evaluate a SG that it is an ASG or not by using rules. And we use APC(Articulation Point Check) nile according to number of articulation points lot a life and death judgment. The performance of our method has been tested on the problem set IGS_31_counted form the Computer Go Test Collection. The test set contains 11,191 Points and 1,123 Strings. We obtain 92.5% accuracy of Points and 95.7% accuracy of Strings.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.1
• /
• pp.22-26
• /
• 2011

On this paper, a circular unimorph-type piezoelectric transducer was proposed and studied. The transducer was fabricated by attaching a circular-shaped PZT ceramic to a circular plate of brass and output characteristics of the fabricated transducer were then analyzed and measured by changing driving points where the mechanical vibrations were applied. Two conditions depending on the location of vibration were respectively defined as a center forced model and an edge forced model. The resonance frequency and output voltage of the models were simulated by using ANSYS, a FEM(finite element method) program. Based on the results of the analyses, the vibration experiment was conducted and the output characteristics then measured through measurement equipment. As a result, the maximum output characteristics of two models were respectively generated at each resonance frequency and the resonance frequency of the center forced model was lower than the edge forced model.

• Korean Journal of Remote Sensing
• /
• v.30 no.5
• /
• pp.547-557
• /
• 2014

This paper presents a method for designing circular template used in similarity measurement for image registration. Circular template has translation and rotation invariant property, which results in correct matching of control points for image registration under the condition of translation and rotation between reference and sensed images. Circular template consisting of the pixels located on the multiple circumferences of the circles whose radii vary from zero to a certain distance, is converted to two-dimensional Discrete Polar Coordinate Matrix (DPCM), whose elements are the pixels of the circular template. For sensed image, the same type of circular template and DPCM are created by rotating the circular template repeatedly by a certain degree in the range between 0 and 360 degrees and then similarity is calculated using mutual information of the two DPCMs. The best match is determined when the mutual information for each rotation angle at each pixel in search area is maximum. The proposed algorithm was tested using KOMPSAT-2 images acquired at two different times and the results indicate high accurate matching performance under image rotation.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.229-232
• /
• 2008

This study presents a numerical procedure to optimize the shape of stepped circular pin-fins to enhance turbulent heat transfer. The KRG method is used as an optimization technique with Reynolds-averaged Navier-Stokes analysis of fluid flow and heat transfer with shear stress transport turbulent model. The objective function is defined as a linear combination of heat transfer and friction loss related terms with a weighting factor. Ten training points are obtained by Latin Hypercube Sampling for two design variables. Optimum shape has been successfully obtained with the increased objective function.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.10a
• /
• pp.229-232
• /
• 2008

This study presents a numerical procedure to optimize the shape of stepped circular pin-fins to enhance turbulent heat transfer. The KRG method is used as an optimization technique with Reynolds-averaged Navier-Stokes analysis of fluid flow and heat transfer with shear stress transport turbulent model. The objective function is defined as a linear combination of heat transfer and friction loss related terms with a weighting factor. Ten training points are obtained by Latin Hypercube Sampling for two design variables. Optimum shape has been successfully obtained with the increased objective function.

• Wind and Structures
• /
• v.6 no.5
• /
• pp.347-356
• /
• 2003

Experimental studies on drag reduction of a circular cylinder of diameter D were conducted in the subcritical flow regime at Reynolds numbers in the range $4{\times}10^4{\leq}Re{\leq}10^5$. To shield the cylinder rear surface from the pressure deficit of the unsteady vortex generation in the near wake, two shield plates were attached downstream of the separation points to form a cavity at the base region. The chord of the shield plates, L, ranged from 0.22 to 1.52 D and the cavity width, G, was in the range from 0 to 0.96 D. It is concluded that significant drag reductions from that of a plain cylinder may be achieved by proper sizing of the shield plates and the base cavity. The study shows that using a pair of shield plates at G/D of 0.86 and angular position ${\theta}$ of ${\pm}121^{\circ}$ results in a configuration with percentage drag reduction of 40% for L/D of 0.5, and 55% for L/D of 1.0.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.2
• /
• pp.44-51
• /
• 1993

Here is represented a vortex panel method to evaluate the performance characteristics of the 2-dimensional turbomachinery with circular arc blades or logarithmic blades. The present method is characterized by distributing small consecutive panels of linearly varing vortex strength satisfying boundary condition at control points and Kutta condition at trailing edge. To confirm the reliability of the present method, experimental result of a 2-D pump impeller of six circular arc blades is compared with the calculated one. As an application of the present method, figures are presented in series showing velocity and pressure distribution between blades.