• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.3
• /
• pp.245-251
• /
• 2015

In an electrical reliability test of a printed circuit board (PCB), the impact of the micro probing pins on the PCB needs to be checked to ascertain the quality of the circuit. In this study, the impact of the dynamic movement of the probing pin on the pad was observed. As a misaligned pin can exert horizontal force on the pad of the PCB, this study focused on the behavior of a misaligned probing pin. The parameters of observation were the circular and flat edges of the probing pin. The effects of the speed of movement, diameter, and the length of projection of the probing pin were also investigated. The results demonstrated that slippage angle is strongly affected by the shape of the edge of the probing pin, and that projection length is an important factor affecting pin slippage. In contrast, the speed of movement of the probing pin was able to double the slippage angle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1585-1593
• /
• 2015

3D-structured (embossed) aluminum sheets have been used in the heat insulation purpose for automative exhaust parts because of increasing their surface areas and stiffness reinforcement imposed in making the embossing pattern. However, there are many restrictions in press forming of the embossed sheet compared with the flat sheet (non-embossed one) because of its difference in the mechanical properties and the geometrical 3-dimensional shape. In this paper we investigated the deformation characteristic of embossed aluminum sheet in the incremental sheet forming process which has frequently used in the design verification and the trial manufacturing of sheet products. The single point incremental forming (SPIF) experiments for the rectangular cone forming using the CNC machine with a chemical wood-machined die and a circular tool shape showed that the formability of the embossed sheet are better than that of the flat sheet in view of the maximum angle of cone forming. This comes from the fact that the embossed sheet between the tool and the elastic die wall is plastically compressed and the flatted area contributes to increase the plastic deformation. Also the tool path along the outward movement from the center showed a better formability than that of the inward movement from the edge. However the surface quality for the tool path along the outward movement evaluated from the surface deflection is inferior than that of the tool path along the inward movement.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.3
• /
• pp.99-106
• /
• 2024

In this paper, we design and implement the HealthSchedule app, which records exercise data based on the GPS sensor embedded in smartphones. This app utilizes the smartphone's GPS sensor to collect real-time location information of the user and displays the movement path to the designated destination. It records the user's actual path using latitude and longitude coordinates. Users register exercise activities and destination points when scheduling, and initiate the exercise. When measuring the current location, a lime green departure marker is generated, and the movement path is displayed in blue, with the destination marker and a surrounding 25-meter radius circle shown in sky blue. Using the coordinates of the starting point or the previous location and the current GPS sensor-transmitted location coordinates, it measures the distance traveled, time taken, and calculates the speed. Furthermore, it accumulates measurement data to provide information on the total distance traveled, movement path, and overall average speed. Even when reaching the destination during exercise, the movement path continues to accumulate until the completion button is clicked. The completion button is activated when the user moves into the sky blue circular area with a radius of 25 meters, centered around the initially set destination. This means that the user must reach the designated destination, and if they wish to continue exercising without clicking the completion button, they can do so. Depending on the selected exercise type, the app displays the calories burned, aiming to increase user engagement and a sense of accomplishment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1171-1176
• /
• 2014

The eye-tracking [ET] is used on the human computer interaction [HCI] analysing the movement status as well as finding the gaze direction of the eye by tracking pupil's movement on a human face. Nowadays, the ET is widely used not only in market analysis by taking advantage of pupil tracking, but also in grasping intention, and there have been lots of researches on the ET. Although the vision based ET is known as convenient in application point of view, however, not robust in changing environment such as illumination, geometrical rotation, occlusion and scale changes. This paper proposes two steps in the ET, at first, face and eye regions are discriminated by Haar classifier on the face, and then the pupils from the discriminated eye regions are tracked by CAMShift as well as Template matching. We proved the usefulness of the proposed algorithm by lots of real experiments in changing environment such as illumination as well as rotation and scale changes.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.1 no.1
• /
• pp.1-8
• /
• 2005

Aquifer Thermal Energy Storage (ATES) can be a cost-effective and renewable geothermal energy source, depending on site-specific and thermohydraulic conditions. To design an effective ATES system having the effect of groundwater movement, understanding of thermohydraulic processes is necessary. The heat transfer phenomena for an aquifer heat storage are simulated by using FEFLOW with the scenario of heat pump operation with pumping and waste water reinjection in a two layered confined aquifer model. Temperature distribution of the aquifer model is generated, and hydraulic heads and temperature variations are monitored at the both wells during 365 days. The average groundwater velocities are determined with two hydraulic gradient sets according to boundary conditions, and the effect of groundwater flow are shown at the generated thermal distributions of three different depth slices. The generated temperature contour lines at the hydraulic gradient of 0.001 are shaped circular, and the center is moved less than 5 m to the direction of groundwater flow in 365 days simulation period. However at the hydraulic gradient of 0.01, the contour center of the temperature are moved to the end of east boundary at each slice and the largest movement is at bottom slice. By the analysis of thermal interference data between two wells the efficiency of the heat pump system model is validated, and the variation of heads is monitored at injection, pumping and no operation mode.

• Geophysics and Geophysical Exploration
• /
• v.12 no.2
• /
• pp.208-214
• /
• 2009

Using the GNSS data and tilt-meter data of Boeun (BOEN) and Goesan (GSAN) GNSS stations, we have calculated the differential distance vector variation with the calculation time span set to 1 hour and 3 hour and differential tilt vector variation along time and derived an indicator of similarity between the two variations along time. The similarity such calculated is rather lower than high. But as the existence of a circular type movement of the antenna's phase center's location due to the tilt's variation of the antenna tower because of the sunlight's diurnal change is certain, we recommend to take such diurnal variation of antenna's location into consideration when the correction error in DGNSS or the measured data at reference stations in VRS (Virtual Reference System) is broadcast.

• Korean Journal of Veterinary Research
• /
• v.45 no.4
• /
• pp.593-599
• /
• 2005

An abattoir study on the abdominal fat necrosis in adult cattle was performed pathologically. Grossly, masses of fat necrosis were leekgreen in colour, lobulated on the cut surface, and saponificated in the texture. These necrotic adipose tissues infiltrated usually into neighboring parenchymal organs including intestines and pancreas, leading to fibrosis or atrophy of them. Histopathologically, necrotic fat cells contained acidophilic, opaque, amorphous substance or basophilic fibrillar or granular minerals in their cytoplasms. The lesions of fat necrosis were divided by fibroconnective tissue. With increase of the severity, necrotic fat cells fused each other and then formed fat cysts. In this severe lesion, necrotic fat cells were partialy or completely replaced by macrophages. Multinucleated giant cells were scattered in this lesion. Interestingly, small artery in the lesion of fat necrosis revealed severe thickening of internal elastic membrane. Severe fibrosis was observed in or between the outer longitudinal and inner circular muscular externas causing segregation, degeneration and necrosis of muscle fibers. The nerve cells of Auerbach's and Meissner's plexuses surrounded by fibrosis were degenerated or necrotic. In addition, necrotic fat cells infiltrated into the pancreas, resulting in pancreas atrophy. From these results, it is speculated that fat necrosis might compromise intestinal movement due to necrosis of muscular externa and ganglion cells of Auerbach's and Meissner's plexuses.

• Korean Journal of Veterinary Research
• /
• v.39 no.3
• /
• pp.435-447
• /
• 1999

The localization of substance P(SP), calcitonin gene-related peptide(CGRP) and three calcium binding proteins, calbindin D-28k(CB), calretinin(CR) and parvalbumin(PA) was immunohistochemically examined in the myenteric and submucous plexuses of Korean native goat duodenum. In the neurons of myenteric and submucous plexuses of duodenum, immunoreactivities of SP, CGRP and CB were confirmed in both nerve cell bodies and fibers. In contrast, CR immunoreactivity was found only in nerve fibers of myenteric plexuses, while PA immunoreactivity was found only in nerve cell bodies of submucous plexuses. In the inner circular muscle layer, dense SP-like immunoreactive fibers were prominent but only a few CGRP-like immunoreactivities were observed. Most of SP- and CGRP-like immunoreactive neurons of both plexuses colocalized with CB. This result showed that SP and CGRP may have a important role for the movement of small intestine. The colocalizations of CB with SP or CGRP in myenteric and submucous plexuses suggest that CB may serve neuromodulatory role for SP- and CGRP-immunoreacted neurons on the movement of intestinal wall.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.1
• /
• pp.97-103
• /
• 2013

This study proposes a path generation technique for simultaneous five-axis driving for ball bar measurement, which is equivalent to cone frustum machining as mentioned in the NAS979 standard. The technique is generalized for a 3D circular path, and it is applicable to all machine tools regardless of their structural configurations. A mathematical machine input model that consists of a five-axis machine tool, ball-bar measurement and conical path information as inputs is presented for easy NC code generation, simulation for various test conditions, and a measurement test. The movement range of rotary axes, which depends on various conditions, is mathematically analyzed based on the proposed conical path model. Moreover, the effect of the movement range on various conditions (apex angle and inclination angle, ball bar tilting acceptance angle, offset position of workpiece ball, etc.) is analyzed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.1
• /
• pp.85-93
• /
• 2022

This paper contains the design and implementation results of a package tour management application using a Geofence technology as well as the performance evaluation. This application ables the tour guide to monitor the tourist movement in real-time whether the tourists are inside the virtual polygonal Geofence set by the tour guide. Even when the tour is moving between travel destinations, a virtual circular Geofence can be set by the tour guide to monitoring the tourist movement while on the move. The application includes tour guide's and tourist's locations, schedule and participant management. To evaluate the performance, average response time and accuracy is measured, resulting in satisfactory performance. The average response time ranged from 0.0047 seconds to 7.3 seconds in various cases and for accuracy, it scored 100% in various cases. It is expected that implementing Geofence technology to package tour management applications will help tour guides to perform more productive package tours by reducing the burden of managing tourists.