• 한국생산제조학회지
• /
• 제4권4호
• /
• pp.42-49
• /
• 1995

It is not clearly known how defects or inclusions of a low carbon steel affect a fatigue strength. We study this issue using SM15C materials. The investigation is carried out by a quantitative evaluation, and experimental findings are: (1) a fatigue limit of A series smooth specimen is 205MPa, and that of B, C, D series is 245MPa, 304MPa and 245MPa, respectively. (2) the fatigue limit varies with respects to the stress distribution I the vicinity of a defects and crack. (3) the micro hole creates a half-circular shape crack, while the hole depth is not critical to the fatigue strength, (4) considering the fatigue strength, the hole diameter is more significant than the hole depth, and (5) Fatigue limit of artificially defected specimen is lower than that of a flawless one (5-10%), however, there exist allowance size and depth of defect which don't get to influence at fatigue limit.

• Archives of Plastic Surgery
• /
• 제32권4호
• /
• pp.521-528
• /
• 2005

The purpose of this research is to find out the degree of cartilage regeneration by inserting the atelo-collagen scaffold obtained from dermis of a calf on cartilage defect site. Dissection underneath the perichondrium by the periosteal elevator on both side of ears of six New Zealand white rabbits were made to expose the cartilage, leaving pairs of circular holes 3, 6, 9 mm width with punches. One hole was left for a control, and on the other hole atelo-collagen scaffold of the same size was transplanted. In postoperative 1, 2, 4 weeks, the tissues were dyed. The length of long axis of neocartilage was measured through an optical microscope with a 0.1 mm graduation at original magnification, ${\times}40$. In the first and second week, both group showed no sign of cartilage regeneration. In the fourth week, regeneration on marginal portions was observed on all groups and the average values of length of long axis of neocartilage according to defect size were as follows: In the cases with 3mm defect, it was $0.85{\pm}0.30mm$ in the control group, and $1.85{\pm}0.38mm$ in the graft group; in the cases with 6 mm defect, $1.33{\pm}0.58mm$ in the control group, and $2.25{\pm}0.46mm$ in the graft group; and in the cases with 9 mm defect, $2.33{\pm}0.77mm$ in the control group, and $4.47{\pm}1.39mm$ in the graft group. This means that the collagen scaffold has an influence on the regeneration of neocartilage. But the relative ratio of the length of neocartilage to cartilage defect size was not significant in the statistics.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 금형가공,미세가공,플라스틱가공 공동 심포지엄
• /
• pp.193-197
• /
• 2005

This paper presents a method by which multiple holes of ultra small size can be punched simultaneously. Silicon wafers were used to fabricate punching die. Workpiece used in the present investigation were the rolled pure copper of $3{\mu}m$ in thickness and CP titanium of $1.5{\mu}m$ in thickness. The metal foils were punched with the dies and arrays of circular and rectangular holes were made. The diameter of holes ranges from $2-10{\mu}m$. The process set-up is similar to that of the flexible rubber pad forming or Guerin process. Arrays of holes were punched successfully in one step forming. The punched holes were examined in terms of their dimensions, surface qualities, and potential defect. The effects of the die hole dimension on ultra small size hole formation of the thin foil were discussed. The optimum process condition such as proper die shape and diameter-thickness ratio (d/t) were also discussed. The results in this paper show that the present method can be successfully applied to the fabrication of ultra small size hole array in a one step operation.

• 반도체디스플레이기술학회지
• /
• 제20권3호
• /
• pp.167-171
• /
• 2021

The core-shell InGaN/GaN Multi Quantum Well-Nanowires (MQW-NWs) that were selectively grown on oxide templates with perfectly circular hole patterns were highly crystalline and were shaped as high-aspect-ratio pyramids with semi-polar facets, indicating hexagonal symmetry. The formation of the InGaN active layer was characterized at its various locations for two types of the substrates, one containing defect-free MQW-NWs with GQDs and the other containing MQW-NWs with defects by using HRTEM. The TEM of the defect-free NW showed a typical diode behavior, much larger than that of the NW with defects, resulting in stronger EL from the former device, which holds promise for the realization of high-performance nonpolar core-shell InGaN/GaN MQW-NW substrates. These results suggest that well-defined nonpolar InGaN/GaN MQW-NWs can be utilized for the realization of high-performance LEDs.

• 융합정보논문지
• /
• 제11권2호
• /
• pp.10-15
• /
• 2021

본 논문에서는 먼저 습식 코팅 방법으로 페로브스카이트 (CH3NH3PbI3) 박막을 글라스 상에 형성하고, 다양한 분석 기법을 이용하여 막의 두께, 표면거칠기, 결정성, 구성성분 및 가시광 영역에서의 이 물질의 반응에 대해 논한다. 완성된 반도체 물질은 막내부에 결함(defect)이 없고 균일하며, 표면거칠기는 매우 작으며, 가시광영역에서 높은 흡수율이 관찰되었다. 다음으로 이와 같이 형성된 유무기 층에 hole 형상을 구현하기 위하여, 구멍이 일정한 간격으로 있는 메탈마스크, 페로브스카이트 물질이 코팅되어 있는 유리, 자석 순서로 되어있는 구조의 샘플을 상압플라즈마 공법을 이용하여 시간에 따른 물질에 형성되는 hole 형태의 변화를 분석하였다. 시간이 길어짐에 따라 더 많이 식각되는 것을 알 수 있으며, 이 중에서 공정 시간을 가장 오래한 샘플에 대해서는 보다 자세하게 살펴보았고, 플라즈마의 위치에 따른 차이에 의해 7영역으로 분류할 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.116-116
• /
• 2004

편마비 환자의 보행운동 개선을 위한 보조기구로 족부보장구(Ankle Foot Orthosis, A.F.O.)가 활용되고 있다 족부보장구는 Fig. 1에 제시한 바와 같이 보행특성상 무수히 반복되는 충격과 굽힘하중을 받는다. 따라서 족부보장구용 재료는 피로특성이 우수한 탄소섬유 강화재(Carbon Fiber Reinforced Plastic, 이하 CFRP)를 주로 사용한다. 그러나 CFRP의 상용재인 프리프레그(prepreg)는 강한 이방성의 단방향 섬유이므로 섬유방향과 하중작용방향의 관계에 매우 민감하다.(중략)

• 한국공작기계학회논문집
• /
• 제18권2호
• /
• pp.170-177
• /
• 2009

The objective of this study is to evaluate an acoustic emission (AE) source characterization and fracture behavior of the SM45C steel by using back-propagation neural network (BPN). In previous research Ref. [8] about k-nearest neighbor classifier (k-NNC) continuity, we used K-means clustering method as an unsupervised learning method for obtaining multi-variate AE main data sets, such as AE counts, energy, amplitude, risetime, duration and counts to peak. Similarly, we applied k-NNC and BPN as a supervised learning method for obtaining multi-variate AE working data sets. According to the error of convergence for determinant criterion Wilk's ${\lambda}$, heuristic criteria D&B(Rij) and Tou values are discussed. As a result, in k-NNC before fracture signal is detected or when fracture signal is detected, showed that produce some empty classes in BPN. And we confirmed that could save trouble in AE signal processing if suitable error of convergence or acceptable encoding error give to BPN.

• 한국음향학회지
• /
• 제14권6호
• /
• pp.62-67
• /
• 1995

본 논문에서는 금속내부에 존재하는 결함의 다양한 형태로부터 반사된 초음파 신호를 디지탈 신호처리에 의하여 특징추출하는 방법을 연구분석하였다. 다양한 형태의 결함으로부터 반사된 초음파 신호는 잡음 등의 영향으로 그 특징의 구별이 애매하므로 자기 회기법(auto-regressive)을 이용한 위너 필터링(Wiener filtering)과 최소 절대치 노름(least-absolute-values norm) 기법을 사용하여 신호의 특징을 추출하고 상호 비교분석하였다. 실험에서는 알루미늄 시편에 평면결함, 사각결함, 원형결함의 세가지 결함형태를 제작하였으며, 초음파를 입사하고 펄스-에코 방법에 의하여 반사신호를 측정하였다. 반사신호의 디지탈 신호처리 결과, 이러한 특징추출방법은 다양한 형태의 결함으로부터 반사된 신호를 효율적으로 분류 할 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.150-150
• /
• 2008

본 연구에서는 Wet chemistry damage가 Nanopatterned p-ohmic electrode에 미치는 영향을 연구하였다. Nanopattern은 Metal clustering을 이용하여, P-GaN와 Ohmic형성에 유리한 Pd을 50$\AA$ 적층한 후 Rapid Thermal Annealing방법으로 $850^{\circ}C$, $N_2$분위기에서 3min열처리를 하여 Pd Clustering mask 를 제작하였다. Wet etching은 $85^{\circ}C$, $H_3PO_4$조건에서 시간에 따라 Sample을 Dipping하는 방법으로 시행하였다 Ohmic test를 위해서 Circular - Transmission line Model 방법을 이용하였으며, Atomic Force Microscopy과 Parameter Analyzer로 Nanopatterned GaN surface위에 형성된 Ni/ Au Contact에서의 전기적 분석과, 표면구조분석을 시행하였다. AFM결과 Wet처리시간에 따라서 Etching형상 및 Etch rate이 영향을 받는 것이 확인되었고, Ohmic test에서 Wet chemistry처리에 의한 Tunneling parameter와 Schottky Barrier Height가 크게 증/감함을 관찰하였다. 이러한 결과들은 Wet처리에 의해서 발생된 Defect가 GaN의 표면과 하부에서 발생되며, Deep acceptor trap 및 transfer거동과 밀접한 관련이 있음을 확인 할 수 있었다. 보다 자세한 Transport 및 Wet chemical처리영향에 관한 형성 Mechanism은 후에 I-V-T, I-V, C-V, AFM결과 들을 활용하여 발표할 예정이다.