• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.11
• /
• pp.1192-1201
• /
• 2009

Analysis of the vibration characteristic for cylindrical shell is more complex than plates since the coupling effects are considered on three dimensions. Based on Love's equation, spectral finite element method(SFEM) is introduced to predict frequency response function of finite circular cylindrical shell in the air with simply supported - free boundary condition without simplifying the equation of motion. And for the radiated noise analysis of cylindrical shell, indirect boundary element method(BEM) is applied using out-of-plane displacements as an input from structural vibration analysis. Comparisons of the structural vibration results by the spectral finite element method and commercial code, NASTRAN(FEM based) are carried out. Likewise, for verification of radiated noise analysis results, commercial code, SYSNOISE(BEM based) are used.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.5
• /
• pp.58-63
• /
• 2011

Underwater vehicles such as UUVs (Unmanned Underwater Vehicles) and ROVs (Remotely Operated Vehicles) use sonar to detect their underwater environment or other underwater vehicles. The underwater vehicles designed recently have an electrical power system with high rotational speed. This system can generate high frequency vibrations above 10 kHz, and these vibrations can cause bad (negative) effects on the performance of the sonar. In many previous investigations, numerical analyses have been used for high frequency vibration problems. In this study, an experimental analysis was carried out, and a circular cylindrical shell was considered as the hull structure of an underwater vehicle. Frequency transfer functions for the circular cylindrical shell were identified using an experimental vibration analysis in the air and in a fully-submerged condition. We compare the frequency transfer functions in the air and water to obtain hydro-elastic effects. It is found that the dynamic characteristics of the circular cylindrical shell are changed by varying the response position.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.807-819
• /
• 1989

Buckling and vibration of laminated non-circular cylindrical shells with constant thickness and simply supported boundary condition is considered. Governing equations are derived based on the Donnell and Flugge shell theory and Galerkin method is applied for the numerical analysis. Comparisons are made between present results and others. Variations of frequency parameter and buckling load parameter on the change of stacking angle, eccentricity parameter and shell theories are investigated. Conclusion of this study is as follows: (1) General solutions of buckling and vibration of laminated non-circular cylindrical shell are obtained. (2) Frequency parameter is decreased as the initial axial load is increased. (3) In general, frequency and buckling load parameter of laminated non-circular cylindrical shells are decreased as increasing of eccentricity parameter and stacking angle.

• Journal of KSNVE
• /
• v.4 no.4
• /
• pp.469-478
• /
• 1994

This paper desfcribes the formulation for the analysis of the free vibration of a circular cylindrical shell with elastic supports by the transfer influence coefficient method. This method was developed on the base of the concept of the successive transmission of dynamic influence coefficients. The analysis algorithm for circular cylindrical shell elastically restrained by springs, which plays an important role in many industrial fields, is discussed. The supporting springs have the axial, circumferential, radial and rotational spring constants uniformly distributed along the circumference of the shell. The simple computational results on a personal computer demonstrate the validity of the present method, that is, the numerical high accuracy, the high speed analysis method and the flexibility for programming, compared with results of the transfer matrixmethod and reference. We also confirmed that the present algorithm could obtain the solutions of high accuracy for system with a number of intermediate rigid supports. And we could easily treat the intermediate support and all boundary conditions by adequately varying the values of spring constants.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.3
• /
• pp.41-46
• /
• 2008

It is a recent trend for advanced ships and submarines to incorporate composite structures with viscoelastically damping material. Much research has been done on curve-fitting techniquesto identify vibration characteristic parameters such as natural frequencies, modal damping ratios, and mode shapes of the composite structure. In this study, an advanced technique for accurately determining vibration characteristic of a circular cylindrical shell-attached viscoelastically damping material is used, based on a multi-degree of freedom (MDOF) curve-fitting method. First, an initial value is obtained by using a linear least square method. Next, using the initial value, the exact modal parameters of the composite circular cylindrical shell are obtained by using a nonlinear least square method. Results show computation time is greatly decreased and accurate results are obtained by the MDOF curve-fitting method.

• Journal of KSNVE
• /
• v.6 no.6
• /
• pp.801-818
• /
• 1996

Free vibration analyses of circular cylindrical shells attached with plate structures for the symmetric boundary condition such as simply-simply supported shells by receptance method are found in literatures. However analyses of those shells with unsymmetric boundary condition as clamped free boundary are hardly found. Here frequency equation of the clamped free circular cylindrical shell with end plate is derived using receptance method and natural frequencies of the combined system were calculated. The frequencies and mode shapes obtained from present method are compared with those of ANSYS to show the validity of the method. Natural frequencies and mode component ratios of clamped-free cylindrical shell are obtained by employing Rayleigh-Ritz method on energy equations, and they are used in receptance calculation. Results show good agreement with those of ANSYS analyses.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.6
• /
• pp.929-936
• /
• 1986

Free vibration characteristics of laminated orthotropic circular cylindrical shells with clamped free boundary condition are investigated. The solution is obtained through a direct solution procedure with axial mode displacements represented as simple Fourier series expressions. On the basis of the thin shell theories of Sanders, Love, Loo, Morley and Donnell, the 4*$ frequency determinant is derived and is expressed in a unified form. Various numerical examples determining the natural frequencies of circular cylindrical shells with isotropic material and also with layers of orthotropic elastic material arbitraily laminated either symmetrically or anti-symmetrically about the shell middle surface. The results obtained compared very well with some available experimental and numerical results.

• Structural Engineering and Mechanics
• /
• v.55 no.4
• /
• pp.785-799
• /
• 2015

A three-dimensional (3-D) method of analysis is presented for determining the free vibration frequencies of hyperboloidal shells free at the top edge and clamped at the bottom edge like a hyperboloidal cooling tower by the Ritz method based upon the circular cylindrical coordinate system instead of related 3-D shell coordinates which are normal and tangent to the shell midsurface. The Legendre polynomials are used as admissible displacements. Convergence to four-digit exactitude is demonstrated. Natural frequencies from the present 3-D analysis are also compared with those of straight beams with circular cross section, complete (not truncated) conical shells, and circular cylindrical shells as special cases of hyperboloidal shells from the classical beam theory, 2-D thin shell theory, and other 3-D methods.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.22 no.1
• /
• pp.1-8
• /
• 1985

The buckling characteristics of cylindrical shells with a circular hole, under axially compressed loads, have been analyzed and the results have been compared with existed experimental results. Deflection function with decay factor is assumed, and stress distribution around a circular hole in tensioned infinite plate is used for formulating buckling energy function. Applying Rayleigh Ritz procedure to this energy function, characteristic equation of eigenvalue problem is determined. Buckling load is defined by the minimum value of eigenvalues calculated according to several decay factors, and as the radius ratios of a circular hole (a/R) and shell thickness ratios (R/t) are varied, the reducing characteristics of buckling load are studied. As a result, buckling loads are reduced by about 50% according to some radius ratios ($a/R{\geq}0.15$) of circular hole and are not nearly affected by shell thickness ratio(R/t).

• Journal of KSNVE
• /
• v.6 no.1
• /
• pp.45-56
• /
• 1996

Frequency equation for clamped-free circular cylindrical thin shell is derived by the application of Rayleigh-Ritz method using the Sanders shell equation. The cubic frequency equation is solved for each axial and circumferential mode number. Integration of the beam characteristic funcitions was performed via Mathematica which results in more accurate integration of the beam functions that affect the accuracy of the frequency. The natural frequencies from this calculation are compared with existing results. It shows that this calculation predicts natural frequencies closer to the test results than existing results.