• Journal of The Korean Astronomical Society
• /
• v.36 no.spc1
• /
• pp.29-36
• /
• 2003

Quiescent solar radiation, at microwave spectral regime, is dominated by gyroresonant and thermal Bremsstrahlung radiations from hot electrons residing in solar active region corona. These radiations are known to provide excellent diagnostics on the coronal temperature, density, and magnetic field, provided that spatially resolved spectra are available from observations. In this paper we present an imaging spectroscopy implemented for a bipolar active region, AR 7912, using the multifrequency interferometric data from the Owens Valley Solar Array (OVSA), as processed with a new imaging technique, so-called Spatio-Spectral Maximum Entropy Method (SSMEM). From the microwave maps at 26 frequencies in the range of 1.2-12.4 GHz at both right- and left-circular polarizations, we construct spatially resolved brightness spectra in every reconstructed pixel of about 2 arcsec interval. These spectra allowed us to determine 2-D distribution of electron temperature, magnetic field of coronal base, and emission measure at the coronal base above the active region. We briefly compare the present result with existing studies of the coronal active regions.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.4
• /
• pp.244-249
• /
• 2014

In this research, it have developed a sensor that could diagnose inner deterioration of covered wires. With this sensor it observed results from simulation, and the attribute required for realization. For simulation it have used FLUX, it have considered all of geometric and electromagnetic information from coil and base metal that influences eddy current sensor's property in order to predict the final result. It assumed there is no mutual inductance in the coil with N number of turns, because equivalent current flows in coil that is continuously connected in eddy current sensor. It assumed circular coil loop draws a circle, always have self inductance, and they are connected in series and overlapped according number of turns (N) in coil, and bobbin configuration. Actual sensor was produced with consideration of inductance and number of turns (N). In conclusion, it were able to test the dependency through results from simulation, actual measurement, and modeling of simulation. It is considered that attributes of respective base metal and structure can be predicted by simulating in advance.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.4
• /
• pp.315-322
• /
• 2018

Bamboo culm comprises internodes and nodes and is tapered from the bottom to the top. Anatomically, bamboo culm comprises vascular bundles and parenchymal base tissue. The gross anatomical structure of a transverse section of any culm internode is determined by the shape, size, arrangement, and number of vascular bundles. The purpose of this research was to examine the morphology of culm and the distribution and shape of vascular bundles in Ampel bamboo (Bambusa vulgaris). Bamboo culms were harvested from the base. Test samples were obtained from a central 2-cm long segment of each internode across the entire length of the culm. Results showed an uneven spread of vascular bundles in the internode cross-section. Transitioning from the outer to the inner layer of the internode, the number of vascular bundles per unit area decreased and their shape was variable. The size of vascular bundles in the middle layer of the internode was greater than that of those in the outer and inner layers. The shape of vascular bundles was circular in the outer layer, which gradually transformed into vertical oval toward the middle layer and horizontal oval toward the inner layer. Vascular bundles were of type III and IV in the bottom of the culm and type III in the middle to the top of the culm.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.2
• /
• pp.183-190
• /
• 2002

This study is about the extraction of highway's superelevation using real time kinematic surveying among of GPS surveying methods which is economic method to construct data base in the side of highway maintain management. Using the developed vehicle, center line and shoulder of highway are measured and enough precision is obtained after analyzing the result. The result is show that 1.3 cm to 2.0 cm error in the clothed and about 0.8 cm to 1.2 cm error in the circular curve. Those errors are proved error to lane making during construction. This study is expected to become efficient method for extraction of highway alignment elements in the Mobile Mapping System.

• Structural Engineering and Mechanics
• /
• v.87 no.4
• /
• pp.347-361
• /
• 2023

This research aims to assess the behavior of reinforced concrete (RC) residential buildings when moment-resisting frames (MRFs) are used as the lateral resisting system. This investigation was conducted using MIDAS Gen v.19.0. Buildings with various plan footprints (Square, Rectangular, Circular, Triangular, and Plus-Shaped), and different heights (15 m, 30 m, 45 m, and 60 m) are investigated. The defined load cases, the equivalent static lateral load pattern, and the response spectrum function were defined as stated by the American Standard (ASCE 7-16), the 1997 Uniform Building Code (UBC97), the Egyptian Code for Loads (ECP-201), and the European Standard (EC8). Extensive comparisons of the results obtained by the different codes (including the story displacement, the story drift, and the base shear) were undertaken; to assess the response of moment-resisting multi-story framed buildings under lateral loads. The results revealed that, for all study cases under consideration, both ECP-201 and EC8 gave smaller base shear, displacement, and drift by one third to one fourth, around one fourth, around one fifth, respectively for both the ELF and RSA methods if compared to ASCE 7-16 and UBC97.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.1 s.4
• /
• pp.75-83
• /
• 2004

This paper describes the design, fabrication, and measurement of a low side lobe antenna for RSE base station of the ETCS which is one of the ITS services. The antenna is installed on the gantry of road side and provides the wireless communication lint between vehicles and RSE. The required characteristics of ETCS base station antenna are low sidelobe and specific beam pattern by the road and install environment and installed place of OBU. To minimize the affects of multipath signal by reflection, Circular polarization is required. To get low sidelobe of antenna, array configuration and weighting factor by Taylor distribution in radiator elements are applied. The measured results of fabricated antenna are as follows; return loss of 130MHz by -10dB, an axial ratio of 2.6dB, and a gain of 17dBi. It is found that the measured beam patterns are similar to design results.

• Journal of the Korean Geographical Society
• /
• v.43 no.2
• /
• pp.235-252
• /
• 2008

Many cartographers have for many years searched for a way to construct cartograms in which the sizes of geographic areas such as states, counties or census tracts are reseated in proportion to their population or some other socio-economic properties. While many techniques and algorithms for creating cartograms have been proposed, some of them are still extremely complex to generate in a proper manner, and many of them suffer either from this lack of readability or from seamless integration with GIS software. This paper, therefore, presents a simple population cartogam technique based on the Circular Cartogram Algorithm(CCA) by Dorling(1996) to tackle these drawbacks by drawing the areas as simple circles for use as a base map and linking the construction with GIS mapping processes. For an automated approach in the cartogram generation, this paper proposes a close coupling method of ArcView GIS 3.3. package in order for users to access to the cartopam algorithm. Then, they will be available through an interface that the ArcView GIS system allows user-written routines to be accessed easily. The CCA and its coupling architecture ensure to improve the potential applicability of the use of cartograms to census mapping at practical levels. As the cartogram examples, cartograms of population and property types in 2005 Korea census data sets are illustrated in the end, by which viewers can easily identify the residential concentration and their relative ratio in Seoul metropolitan area.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.12
• /
• pp.67-75
• /
• 2016

DNA computing technology makes the interests on DNA storage and DNA watermarking / steganography that use the DNA information as a newly medium. DNA watermarking that embeds the external watermark into DNA information without the biological mutation needs the reversibility for the perfect recovery of host DNA, the continuous embedding and detecting processing, and the mutation analysis by the watermark. In this paper, we propose a reversible DNA watermarking based on circular histogram shifting of DNA code values with the prevention of false start codon, the preservation of DNA sequence length, and the high watermark capacity, and the blind detection. Our method has the following features. The first is to encode nucleotide bases of 4-character variable to integer code values by code order. It makes the signal processing of DNA sequence easy. The second is to embed the multiple bits of watermark into -order coded value by using circular histogram shifting. The third is to check the possibility of false start codon in the inter or intra code values. Experimental results verified the our method has higher watermark capacity 0.11~0.50 bpn than conventional methods and also the false start codon has not happened in our method.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.3
• /
• pp.59-72
• /
• 2014

For circular rigid footings with a rough base on sand, combined vertical - moment loading capacity was studied by three-dimensional numerical modelling. Mohr-Coulomb plasticity model with the associated flow-rule was used for the soil. After comparing the results of the swipe loading method, which can construct the interaction diagram with smaller number of analyses, and those of the probe loading method, which can simulate the load-paths in the conventional load tests, it was found that both loading methods give similar results. Conventional methods based on the effective width or area concept and the results by eccentricity factor ($e_{\gamma}$) were reviewed. The results by numerical modelling of this study were compared with those of previous studies. The combined loading capacity for vertical (V) - moment (M) loading was barely affected by the internal friction angle. It was found that the effective width concept expressed in the form of eccentricity factor can be applied to circular footings. The numerical results of this study were smaller than the previous experimental results and the differences between them increased with the eccentricity and moment load. Discussions are made on the reason of the disparities between the numerical and experimental results, and the areas for further researches are mentioned.

• Journal of Korea Multimedia Society
• /
• v.16 no.3
• /
• pp.318-329
• /
• 2013

This paper proposes a DNA watermarking method for the privacy protection and the prevention of illegal copy. The proposed method allocates codons to random circular angles by using random mapping table and selects triplet codons for embedding target with the help of the Lipschitz regularity value of local modulus maxima of codon circular angles. Then the watermark is embedded into circular angles of triplet codons without changing the codes of amino acids in a DNA. The length and location of target triplet codons depend on the random mapping table for 64 codons that includes start and stop codons. This table is used as the watermark key and can be applied on any codon sequence regardless of the length of sequence. If this table is unknown, it is very difficult to detect the length and location of them for extracting the watermark. We evaluated our method and DNA-crypt watermarking of Heider method on the condition of similar capacity. From evaluation results, we verified that our method has lower base changing rate than DNA-crypt and has lower bit error rate on point mutation and insertions/deletions than DNA-crypt. Furthermore, we verified that the entropy of random mapping table and the locaton of triplet codons is high, meaning that the watermark security has high level.