• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.558-561
• /
• 2007

In this paper, non working day for the construction project in Cheongju and Chungju region considering weather condition was estimated. In Cheongju region, non working day for outside and half outside work was 157days and for interior work 144days. For Chungju region, non working day for outside and half outside work was 160days and for interior work 144days. Non working day affected by temperature was 144 days at both Chungju and Cheongju. Non working day due to low temperature was 109 days and it due to high temperature was 45 days for Choengju. In Chungju, it was 11Sdays for cold weather, while it due to hot weather was 29 days.Non working day due to rainfall was 23 days at both region. To reduce the deviation between estimated non working days and measured ones, proper selection of the duration is required.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.537-548
• /
• 2013

In this study, the hydraulic channel routing model was constructed to analysis the effect of flood control with the operation of Chungju Dam for 2006 flood. Study area was divided with up- and downstream of Chungju Dam in the upper Han River of Paldang Dam. The model was calibrated and verified for the flood event of 1995-2008. The effects of flood control of Chungju Dam were compared with the simulation results without the dam, and the rising effects of stage in the main observation stations were analyzed by the variation of released dam discharge. Consequently, the operation of Chungju Dam for 2006 flood was performed properly, but the effects of flood control of Chungju Dam were so focused in downstream of the dam that institutional complement was demanded to reduce the flood damage in the upper region of the dam. The limit of decision rule of downstream stage in the backwater region of dam was analyzed to solve the problem, and the decision rule of downstream stage was proposed to consider the discontinuity between the backwater region of dam and the design flood of upper stream. The proposed rule will be used to design the reduction of flood damage in upper stream of dam and to apply the analysis of region for flood damage.

• Journal of Institute of Convergence Technology
• /
• v.2 no.2
• /
• pp.55-58
• /
• 2012

The strategic industry in Chungbuk province is the electric and electronic related industry. In the Chnugju region, the trend of major industry have change from the electric and electronic related industry to mechanical parts and components related industry include manufacturing of automobile and transportation. In this paper, we perform statistical analysis using the micro data service provided by the Statistics Korea, The CAGR of the number of employee and value-added value in the electric and electronic related industry during past 7 years are -7.1% and -13.2%, respectively while the CAGR in the mechanical parts related industry are 14.4% and 22.9%, respectively. However, value-added value per value of shipment of the mechanical related industry is lower than that of the electric and electronic related industry.

• Journal of Korean Society on Water Environment
• /
• v.27 no.4
• /
• pp.509-515
• /
• 2011

For this study the 4 sub-watersheds Okdong A, Hankang B, Jecheon A and Hankang C which are the main streams of the Han River within the mid-level region of Chungju Dam are selected and the analysis of soils has been carried out through the soil basic survey. When it comes to the soil erosion amount the soil nutrient load has been calculated by utilizing the RUSLE erosion equation. In case of the data related to the measurement of water flow and quality the information available from the "Water Information System" one of the websites run by the Ministry of Environment has been used to calculate the water pollution load. The correlation between the soil nutrient load and the water pollutant load has been analyzed through making comparison. According to the results related to the soil nutrient load of each sub-watershed the Hankang C shows the highest values TOC 29,986.92 ton/yr, TN 3,860.33 ton/yr and TP 973.97 ton/yr respectively. Even when it comes to the loads related to water quality the Hankang C shows also comparatively high values TOC 6,625.64 ton/yr, TN 7,335.01 ton/yrand TP 145.49 ton/yr respectively. The soil nutrient loads of the sub-watersheds are shown to increase towards the lower stream meaning the load increases in the order of Hankang CHankang B and Okdong A. When it comes to the water pollutant load the value goes up along down the water system meaning the load gets higher in the order of Hankang C, Hankang B and Okdong A while utilizing the mainstream within the mid-level region of Chungju Dam as the basis. The correlation study showed that the nutrient content of soil is proportional to the pollutant load in water with the strongest positive correlation with TOC.

• Korean Journal of Head & Neck Oncology
• /
• v.37 no.1
• /
• pp.43-46
• /
• 2021

Mucinous cystadenocarcinoma (MCA) is a malignant tumor that mainly occurs in the breast or ovary, but MCA is internationally rarely reported in head and neck region. Especially MCA in minor salivary gland of oral cavity is even more rare. It is characterized by cystic spaces lining of epithelial cells containing intracytoplasmic mucin. We report a case of MCA in the labial mucosa of upper lip considered to develop from minor salivary gland with a review of literatures.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.8
• /
• pp.1215-1218
• /
• 2010

The recombinant DNA pLR5cat_PSAB, in which pediocin PA-1 structural and immunity genes (pedAB) fused with the promoter and deduced signal sequence of an ${\alpha}$-amylase gene from a bifidobacterial strain were inserted in Escherichia coli-lactobacilli shuttle vector pLR5cat, was transferred to Lactobacillus reuteri KCTC 3679 and the transformant presented bacteriocin activity. The recombinant L. reuteri KCTC 3679 transformed with the shortened pLR5cat(S)_PSAB, where a nonessential region for the lactobacilli replicon was removed, also showed bacteriocin activity. The molecular mass of the secreted pediocin PA-1 from the recombinant bacteria was the same as that of native pediocin PA-1 (~4.6 kDa) from Pediococcus acidilactici K10 on a sodium dodecylsulfate-polyacrylamide gel electrophoresis (SDS-PAGE) gel. In cocultures with Listeria monocytogenes, the recombinant L. reuteri KCTC 3679 effectively reduced the viable cell count of the pathogenic bacterium by a 3 log scale compared with a control where L. monocytogenes was incubated alone.

• Macromolecular Research
• /
• v.15 no.4
• /
• pp.330-336
• /
• 2007

Luminescent CdSe/ZnS QDs, with emission in the red region of the spectrum, were synthesized and encapsulated in poly(ethylene glycol)-poly(D,L-lactide) diblock copolymer micelles, to prepare water-soluble, bio-compatible QD micelles. PEG-PLA diblock copolymers were synthesized by ring opening polymerization of D,L-lactide, in the presence of methoxy PEG as a macro initiator. QDs were encapsulated with PEG-PLA polymers using a solid dispersion method in chloroform. The resultant polymer micelles, with encapsulated QDs, were characterized using various analytical techniques, such as UV- Vis measurement, light scattering, fluorescence spectroscopy, transmission electron microscopy (TEM) and atomic forced microscopy (AFM). The polymer micelles, with encapsulated QDs, were spherical and showed diameters in the range of 20-150 nm. The encapsulated QDs were highly luminescent, and have high potential for applications in biomedical imaging and detection.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.5
• /
• pp.606-613
• /
• 2011

In this paper, patterns of laser scattering and detection of micro defects have been investigated based on Rayleigh criterion for silicon wafer in solar cell. Also, a new laser scattering mechanism is designed using characteristics of light scattering against silicon wafer surfaces. Its parameters are to be optimally selected to obtain effective and featured patterns of laser scattering. The optimal parametric ranges of laser scattering are determined using the mean intensity of laser scattering. Scattering patterns of micro defects are investigated at the extracted parameter region. Among a lot of pattern features, both maximum connected area and number of connected component in patterns of laser scattering are regarded as the important information for detecting micro defects. Their usefulness is verified in the experiment.

• Journal of the Korean housing association
• /
• v.14 no.4
• /
• pp.39-48
• /
• 2003

The purpose of this study was to analyze the changes of floor plans in the entry and transfer spaces of single detached houses. The sample size was 185 households in Chungju, Jechon and Wonju Which are small cities in the central region of Korea. The results of the study are as follows: Firstly, the approach and transfer spaces show various changes and those are important factors which symbolize the housing plane typology transformations of the research areas. Secondly, the approach direction to the indoor space was more adopted a front approach in 1960's and 1970's, it is a side approach in 1980's, and a back side approach in 1990's. Thirdly, as the stage of the transfer space increased, the detached house planes have been changing to the direction, the depth of space comes to be deep, spatial function to be fixed, and privacy of bed rooms to be increased.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.176-179
• /
• 2003

ITO films on PET substrate were prepared by DC magnetron sputtering method using powdery target with different deposition conditions. In addition, the electrical and optical properties were investigated. As the sputtering power and working pressure were higher, the resistvity of ITO films increased. The optical transmittance deteriorated with increasing sputtering power and thickness. As the working pressure increased, however, the optical transmittance improved at visible region of light. From these results, we could deposited ITO films with $8{\times}10^{-3}\;{\Omega}-cm$ of resistivity and 80% of transmittance at optimal conditions.