• Journal of Korea Water Resources Association
• /
• v.31 no.1
• /
• pp.35-44
• /
• 1998

An integrated system of GIS and water quality model was suggested including the pollutant loads from the watershed. The developed system consists of two parts. First part is the GIS module. The geographic information system of the study area was built to provide the information on landuse and several surface factors concerning the overland flow processes of water and pollutants. Second part is the modeling modules which include storm event pollutant load model(SEPLM)., non-storm event pollutant load model(NSPLM), and river water quality simulation model(RWQSM). Models can calculate the pollutant load from the study area. The databases and models are linked through the interface modules resided in the overall system, which incorporate the graphical display modules and the operating scheme for the optimal use of the system. The developed system was applied to the Chungju multi-purpose reservoir to estimate the pollutant load during the four selected rainfall events between 1991 and 1993,. based upon monthly basis and seasonal basis in drought flow, low flow, normal flow and wet flow.

• Korean Journal of Materials Research
• /
• v.10 no.6
• /
• pp.415-421
• /
• 2000

The effect of silica binder content on the mechanical properties of zircon shell mold was investigated. Content of binder silica sol to refractory powder in weight[$R_W$] was adjusted from 0.18 to 0.43. Sintering of the shell mold was carried out in the temperature range of $871^{\circ}C$ to $1400^{\circ}C$. Green strength of the shell mold at room temperature increased with increasing $R_W$ and sintering temperature up to $1300^{\circ}C$. However, the mold with $R_W$ of 0.43 that sintered at $1400^{\circ}C$ for 3 hours showed relatively low strength and large level of porosity. The mechanical behavior of the shells is supposed to attributed to the difference in thermal expansion coefficient between refractory powder and binder silica. The optimum value of $R_W$ for zircon-based shell molds was found to be 0.33.

• Journal of Applied Biological Chemistry
• /
• v.62 no.4
• /
• pp.375-384
• /
• 2019

The root of Panax ginseng C.A. Meyer were extracted with 70% aqueous EtOH and the concentrates were partitioned into MeOH and H₂O fractions using Diaion HP-20. The repeated SiO₂ or octadecyl SiO₂ column, and MPLC for the MeOH fraction led to isolation of four malonyl ginsenosides. The chemical structures of these compounds were determined as malonyl ginsenoside Rd (1) malonyl ginsenoside Rc (2) malonyl ginsenoside Rb2 (3) malonyl ginsenoside Rb1 (4) based on spectroscopic analyses including Nuclear magnetic resonance and HR-TOF/MS. The contents of malonyl ginsenoside Rb1 was highist as 5.44 mg/g of five years of ginseng. And malonyl ginsenoside Rd was lowest as 0.11 mg/g of six years of ginseng. Additionally, the malonyl ginsenoside Rd exhibited hepatoprotective effect against ethanol-induced hepatotoxicity in HepG2 cell line.

• Journal of Applied Biological Chemistry
• /
• v.62 no.4
• /
• pp.399-406
• /
• 2019

The roots of Scrophularia buergeriana were extracted with 80% aqueous Methanol and the concentrates were partitioned into EtOAc, n-BuOH, and H₂O fractions. The repeated silica gel or octadecyl SiO₂column, and medium pressure liquid chromatographies for the n-BuOH fraction led to isolation of phenylethanoid glycosides and iridoid glycosides. The chemical structures of these compounds were determined as harpagoside (1), angoroside C (2), aucubin (3) and acetoside (4) based on spectroscopic analyses including nuclear magnetic resonance and MS. A simple and efficient HPLC with UV detection method for the simultaneous determination of the four compounds (1-4) has been developed and applied to their content determination in the S. buergeriana. The roots were extracted by 80% methanol, and the contents of 1, 2, 3, and 4 were determined to 11.5, 7.6, 41.2, and 4.8 mg/g, respectively. Additionally, angoroside C (2) and acetoside (4) exhibited hepatoprotective effect against ethanol-induced hepatotoxicity in HepG2 cell line.

• Journal of Applied Biological Chemistry
• /
• v.63 no.1
• /
• pp.9-22
• /
• 2020

This study was designed to use the safety management data for residual pesticides in imported banana based on the investigation of pesticide residue detection of agricultural products with different origins in the Republic of Korea. From the USA, EU, UK, Japan and Korea from 2007 to 2018, the results of banana residue pesticides were summarized into detected pesticides, number of inspections, number of pesticide detection cases, and the amount of detected pesticide residue. A total of 109 pesticides were detected for the pesticide residue and pesticide detection rate was 4.58% in 206,894 cases. The detection rate was ranged within 10.62-24.62% for chlorpyrifos, imazalil, methyl-bromide, azoxystrobin, carbendazim, pretilachlor and thiabendazole. Among them, chlorpyrifos was detected most often followed by imazalil, azoxystrobin, thiabendazole, bifenthrin and carbendazim. According to the results of monitoring data for bananas in EU, Japan, USA, UK and Korea, the kinds of detected pesticides were 85, 57, 23, 18 and 8, respectively. Azoxystrobin, bifenthrin and chloropyrifos were found in monitoring data of all countries. Fourteen and twelve pesticides were detected in bananas from Costa Rica and Ecuador, respectively. Imazalil and thiabendazole were detected in 16 and 11 origins, respectively. Myclobutanil and iprodione were detected in four and two countries, respectively. In bananas from Costa Rica, azoxystrobin and bifenthrin were detected 11.8 and 9.8%, respectively, and the detection rate of azoxystrobin was 19% in bananas from Colombia. Chlorpyrifos was detected 22.7, 13.3 and 10.8% in bananas from Belize, Colombia and Costa Rica respectively. Myclobutanil was detected in bananas from Colombia and Costa Rica with the rate of 17.9 and 10.4%, respectively.

• Reproductive and Developmental Biology
• /
• v.33 no.4
• /
• pp.257-262
• /
• 2009

This study was to investigate pregnancy rate of IVM/IVF/IVC Korean cattle (registered in government) embryos according to transport time course. For the production of embryos, oocytes recovered from slaughtered excellent grade cow and highly motile frozen-thawed bull semen (purchased from LIMC, KPN#497) was used. In vitro produced embryos were cultured in CR1aa medium for 8 days and some of them were frozen. The rate of average cleavage (>2-cell) was 83.0% (308/371) and blastocyst rate at day 8 was 34.7% (107/308). Among in vitro produced blastocyst embryos at day 8, most healthy embryos were freshly transferred on production day and some frozen embryos were direct transferred on appropriate day. These embryos were produced in a laboratory, embryo transfer (ET) was planned in 10 areas of the remote island (Jeju) from the laboratory by airplane. Thus, we examined the pregnancy rate in recipient cow according to embryo of transport time course before ET. From embryo transferred 44 recipient cows, overall pregnancy was 40.9% (18/44), these 18 cows were all calved [single, 94% (17/18); twin, 6% (1/18)] and total embryo implantation rate was 26% (19/66). Comparing transport time in the base of 6 hr, pregnancy rate in ET group required less 4 hr (60%, 9/15) was significantly higher than that required more 6 hr (26.3%, 5/19). In direct ET of freezing embryos, the pregnancy rate was 40% (4/10). However, it was difficult to find the meaning of temperature, pH and corpus luteum quality of recipients on comparison of pregnancy rate. When the cell death level of embryos according to storage time in thermos (straw container) before ET was measured by TUNEL staining, apoptotic index was increased with storage time-dependent. These results demonstrated that long distance transfer of IVM/IVF/IVC embryos is possible and the time of embryo transport is very important for the pregnancy rate on field trial.

• Analytical Science and Technology
• /
• v.12 no.4
• /
• pp.326-331
• /
• 1999

The metabolites of 1,2,4-trimethylbenzene (TMB) were synthesized and determined by capillary electrophoresis (CE). The optimum conditions of CE for the separation and determination of 3,4-, 2,4-, 2,5-dimethylbenzoic acid and 3,4-, 2,4-, 2,5-dimethylhippuric acid from the rat urine were as following: the fused silica capillary($75{\mu}m$ i.d. ${\times}$ 36 cm length, 29 cm to detector) was used and kept at $15^{\circ}C$. The applied voltage was 10㎸ and compounds were detected at UV 210 mnm and 254 nm. The running electrolyte was 0.1 M phosphate buffer (pH 7) containing 15 mM of ${\beta}-CD$ and 3% of 2-propanol. The relative amount of the metabolite of 1,2,4-TMB in the rat urine was 56.7% of 3,4-isomer, 30.5% of 2,4-isomer and 12.8% of 2,5-isomer. This method can be applied to the analysis of TMB-metabolites in human urine.

• Analytical Science and Technology
• /
• v.12 no.4
• /
• pp.284-289
• /
• 1999

Dissolved inorganic carbonates in ground water were quantitatively recovered by using gas evolution method. Gas evolution method was found to be less time-consuming, less susceptible to the contamination fromatmospheric $CO_2$ and little affected by the sulfate ions in comparison to the direct precipitation method. Extraction efficiency of nearly 99% could be achieved by gas evolution method in two hours using recirculated gas at a sweeping rate of 4 liter per minute. Samples for carbon isotope fractionation study were collected in three fractions with collection times. The evolution time for the first fraction was one hours, and then second and third fractions were collected at intervals of 30 minutes, respectively. A small portion of each fraction was analyzed to evaluate ${\delta}^{13}C$ values, which were measured to be -7.9‰, -3.0‰ and +0,4‰ for the each fraction. The result clearly indicated that gas evolution method generates isotopically lighter carbon at the beginning of the purging process and heavier isotopes at the end. However, this isotope fractionation effect could be neglected by the almost complete recovery of carbonates.

• Journal of Animal Science and Technology
• /
• v.48 no.2
• /
• pp.247-254
• /
• 2006

The present study was carried out to determine the effects of feeding levels of barley grain in diets of Hanwoo on the growth performance and carcass characteristics of Hanwoo. Twenty Hanwoo bull calves (initial mean body wt. 99kg) were randomly divided to examine the effects of 5 feeding levels of barley grains(addition levels: 0, 0 and 40% for FII40; 0, 0 and 60% for FII60; 0, 20 and 40% for F2040; and 0, 20 and 60% for F2060 during the growing, early fattening and late fattening periods, respectively) on growth performance and meat quality. Body weight was not affected by the feeding level of barley grains through the whole experimental period, although the body weight of Hanwoo bulls fed FII40 diet at 24 months old of age tended to be lower(591.5kg) than that of other animals(606.2～614.6kg). However, body weight gain in the bulls of the FII60 diet was slightly increased(P<.19). The feeding levels of barley grains did not influence on fasting body weight, carcass weight, carcass rate, lean meat, retailed cut, KPH fat and bone yield. The lean meat yield(89.82%) and fat yield(20.28%) tended to increase in Hanwoo bulls fed the F2060 compared with other treatments. Feeding of the diets of FII40 resulted in the higher marbling scores as 3.75, respectively than other diets.

• Journal of Animal Science and Technology
• /
• v.51 no.2
• /
• pp.105-110
• /
• 2009

The Objective of this study was to compare performances of proven and young holstein bulls bred in Korea. Proven bulls are categorized into the imported and the korean ones. Data from 148,329 heads of daughters of 1,128 bulls from 1990 to 2004 were used in this study. Proven bulls showed higher milk yield than young bulls in same year. Young bulls, however, always yielded more milk than korean bulls when proven bulls were categorized into the imported and the korean ones. Hence, it was proven that dairy bull selection program had properly been functioned in Korea. Selected bulls, which were korean proven bulls and young bulls, yielded higher milk fat than imported bulls as the selection was weighted on the yield of the milk fat. This comparison was based on the performances of daughters without the consideration of the semen price. Semen price of the imported proven bulls were higher than the korean proven bulls and the semen of young bulls was free. Hence, the performances of korean bulls with the consideration of the preferential effect would be much higher than others, and further studies are necessary.