• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.4
• /
• pp.387-400
• /
• 2013

In this study, the slope stability analysis and the landslide hazard assessment in tunnel portal slope were carried out. First, we selected highly vulnerable areas to slope failure using the slope stability analysis and analyzed the slope failure scale. According to analyses results, high vulnerable area to slope failure is located at 485~495 m above sea level. The slope is stable in a dry condition, while it becomes unstable in rainfall condition. The analysis results of slope failure scale show that the depth of slope failure is maximum 2.1 m and the length of slope failure is 18.6 m toward the dip direction of slope. Second, we developed a 3-D simulation program to analyze characteristics of runout behavior of debris flow. The developed program was applied to highly vulnerable areas to slope failure. The result of 3-D simulation shows that debris flow moves toward the central part of the valley with the movement direction of landslide from the upper part to the lower part of the slope. 3-D simulation shows that debris flow moves down to the bottom of mountain slope with a speed of 7.74 m/s and may make damage to the tunnel portal directly after 10 seconds from slope failure.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.11
• /
• pp.1529-1539
• /
• 2012

A whole genome association (WGA) study was performed to detect significant polymorphisms for meat quality traits in an $F_2$ cross population (N = 478) that were generated with Korean native pig sires and Landrace dams in National Livestock Research Institute, Songwhan, Korea. The animals were genotyped using Illumina porcine 60k SNP beadchips, in which a set of 46,865 SNPs were available for the WGA analyses on ten carcass quality traits; live weight, crude protein, crude lipids, crude ash, water holding capacity, drip loss, shear force, CIE L, CIE a and CIE b. Phenotypes were regressed on additive and dominance effects for each SNP using a simple linear regression model, after adjusting for sex, sire and slaughter stage as fixed effects. With the significant SNPs for each trait (p<0.001), a stepwise regression procedure was applied to determine the best set of SNPs with the additive and/or dominance effects. A total of 106 SNPs, or quantitative trait loci (QTL) were detected, and about 32 to 66% of the total phenotypic variation was explained by the significant SNPs for each trait. The QTL were identified in most porcine chromosomes (SSCs), in which majority of the QTL were detected in SSCs 1, 2, 12, 13, 14 and 16. Several QTL clusters were identified on SSCs 12, 16 and 17, and a cluster of QTL influencing crude protein, crude lipid, drip loss, shear force, CIE a and CIE b were located between 20 and 29 Mb of SSC12. A pleiotropic QTL for drip loss, CIE L and CIE b was also detected on SSC16. These QTL need to be validated in commercial pig populations for genetic improvement in meat quality via marker-assisted selection.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.353-359
• /
• 2015

This study introduces a resource recycling system in urban apartment complex using four different technologies. The four technologies, called 4G, include a production technology for reclaimed water (Green water), a biogas production technology from organic waste (Green biogas), a reuse technology of rainwater (Green rainwater), and urban agropark (Green pyramid). Green water is the technology for producing the reclaimed water from wastewater, rainwater and underground water, and the average concentrations of BOD, SS, T-N and coliform of reclaimed water were 7.8mg/L, ND (not detected), 4.9mg/L and ND, respectively. Green biogas is the technology for producing biogas and effluent after treating organic wastes (e.g. food waste and night soil) discharged from households, and the average production rates of hydrogen and methane were $0.33m^3/m^3/d$ and $0.24m^3/m^3/d$, respectively. Green pyramid, agricultural farm operated by biogas and reclaimed water, provides a healthy and recreational space for residents, and plant growth rates using treated water and reclaimed water showed height of 1.32cm and weight of 112.8g. Therefore, 4G technologies can improve the recycling rate and treatment efficiencies of waste and wastewater in an apartment complex.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1215-1224
• /
• 2013

Great efforts have been made worldwide to reduce the Green House Gas (GHG) emission following the "Kyoto Protocol" declared during the United Nations Framework Convention on Climate Change in 1997. Many industries have restructured to meet the standard set by the Protocol. However, no clear guidance has been established for the purpose of reducing the GHG emission in construction industry. In addition, no significant effort has been made to conserve the energy during construction activities. For more effective energy saving in construction industry, it is essential to collect data about energy consumption, quantity of environmental emissions and costs. However, most studies on sustainable construction have been concentrated on the use of equipment, maintenance and repair works during construction due to the difficulties of collecting such data. This study suggests a method to select the most environmentally friendly equipment combination for earthwork with comparing environmental loads and costs using the database of Life Cycle Inventory in the Ministry of Knowledge Economy and Ministry of Environment of Korea.

• Journal of Mushroom
• /
• v.6 no.2
• /
• pp.43-46
• /
• 2008

This study was carried out to investigate the utilization of platanus for Pleurotus ostreatus culture medium. The results are as follows ; The growth of mycelial was the highest in the mixture medium of platanus sawdust 90% with rice bran 10% as of 12.8cm after 30days culture. The mycelia density of most of media were high exception of mixture medium, platanus tree sawdust 60% with rice bran 40%. The total nitrogen, phosphate, and potassium contents in all mushroom media were tended to decrease after oyster mushroom growth. In platanus sawdust 90% with rice bran 10%, total nitrogen, potassium, calcium and magnesium content of fruit body were higher than other treatments, but phosphate content was the highest in Douglas-fir sawdust 80% with rice bran 20% treatment as of 0.92%. The mycelial culture period was ranged 26~37 days according to different media, the mushroom yield of culture medium with platanus tree sawdust 80% with rice bran 20% was increased 18% compare to control Douglas-fir sawdust 80% with rice bran 20%.

• Journal of Mushroom
• /
• v.15 no.1
• /
• pp.31-37
• /
• 2017

In this study, we investigated the amino acids content of shiitake mushrooms grown in eight different media and under three different temperature conditions. The sawdust media were supplemented with 4 kinds of nutrients - rice bran, barley, bean curd refuse, and red ginseng refuse in an 8:2 ratio with or without 0.5% calcium chloride, and the fruiting temperature was set to low ($13-15^{\circ}C$), medium ($18-20^{\circ}C$), or high temperatures ($24-26^{\circ}C$). Seventeen amino acids were detected, and the content varied depending on the compositions of the media. The highest total amino acid content (209.7 mg/g) was measured in mushrooms from the media with red ginseng refuse, and the glutamic acid content was the highest (51.3 mg/g) in mushrooms from the media with barley. In terms of fruiting temperature, the amino acid content was the highest (38.2%) at medium temperature followed by the content at low (32.5%) and high temperature (29.3%). The amino acid composition of shiitake mushrooms was similar between the medium and low temperature conditions.

• Journal of Mushroom
• /
• v.15 no.3
• /
• pp.139-144
• /
• 2017

A. bisporus is the fifth most cultivated mushroom in Korea, and approximately 10,757 tons were cultivated in 2015. The genetic diversity of collected strains in Korea and commercial cultivars was analyzed using inter-simple sequence repeat (ISSR) markers. ISSR markers known to be comparable among A. bisporus spp. were selected from various markers. Totally, 16 markers, namely the ISSR markers 807, 808, 810, 811, 834, 835, 836, 841, 842, P3, P8, P17, P22, P30, P38, and P39, were evaluated to discriminate between ASI 1110, 1114, 1115, 1238, 1246, 1365, 1366, and 1369 for selecting suitable markers in 16 markers. The ISSR markers P31, P38 and P39 exhibited various fingerprints that could help classify the strains in species. Using the three markers, genetic relationships among 39 strains, including commercial cultivars, such as SaeA and SaeYeon, were analyzed using the UPGMA method. The results of the analysis of the genetic relationships between commercial cultivars and collected strains in Korea confirmed that the commercial cultivars were different from the collected strains in Korea. These results suggested that the ISSR markers P31, P38, and P30 could be used for selecting the commercial cultivars of A. bisporus.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.11
• /
• pp.979-986
• /
• 2016

The tripod shafts of constant-velocity joint are used in both the trains KTX and KTX-sanchon. It is an important component that connects the motor reduction unit and the axle reduction unit in a power bogie. The tripod shaft not only transmits drive and brake torque in the rotational direction, but also slides in the axial direction. If the drive system is loaded with an excessive torque, the fuse part of the shaft will be fractured firstly to protect the other important components. In this study, a rig was developed for conducting torsion tests on the tripod shaft, which is a type of mechanical fuse. The tripod shafts were subjected to torsional fracture test and torsional fatigue test on the rig. The weak zone of the tripod shaft was identified, and its fatigue life was predicted using finite element analysis (FEA). After analyzing the FEA results, design solutions were proposed to improve the strength and fatigue life of the tripod shaft. Furthermore, the deterioration trend and time for failure of the tripod shaft were verified using the hysteresis loops which had been changed with the advancement of the torsional fatigue test.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.10
• /
• pp.1670-1676
• /
• 2018

Objective: This study was conducted to enable on-line prediction of primal and commercial cut weights in Korean slaughter pigs by AutoFom III, which non-invasively scans pig carcasses early after slaughter using ultrasonic sensors. Methods: A total of 162 Landrace, Yorkshire, and Duroc (LYD) pigs and 154 LYD pigs representing the yearly Korean slaughter distribution were included in the calibration and validation dataset, respectively. Partial least squares (PLS) models were developed for prediction of the weight of deboned shoulder blade, shoulder picnic, belly, loin, and ham. In addition, AutoFom III's ability to predict the weight of the commercial cuts of spare rib, jowl, false lean, back rib, diaphragm, and tenderloin was investigated. Each cut was manually prepared by local butchers and then recorded. Results: The cross-validated prediction accuracy ($R^2cv$) of the calibration models for deboned shoulder blade, shoulder picnic, loin, belly, and ham ranged from 0.77 to 0.86. The $R^2cv$ for tenderloin, spare rib, diaphragm, false lean, jowl, and back rib ranged from 0.34 to 0.62. Because the $R^2cv$ of the latter commercial cuts were less than 0.65, AutoFom III was less accurate for the prediction of those cuts. The root mean squares error of cross validation calibration (RMSECV) model was comparable to the root mean squares error of prediction (RMSEP), although the RMSECV was numerically higher than RMSEP for the deboned shoulder blade and belly. Conclusion: AutoFom III predicts the weight of deboned shoulder blade, shoulder picnic, loin, belly, and ham with high accuracy, and is a suitable process analytical tool for sorting pork primals in Korea. However, AutoFom III's prediction of smaller commercial Korean cuts is less accurate, which may be attributed to the lack of anatomical reference points and the lack of a good correlation between the scanned area of the carcass and those traits.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.10
• /
• pp.1635-1642
• /
• 2018

Objective: This study was conducted to evaluate the effects of Rhus succedanea extract addition on in vitro ruminal fermentation and microbial growth. Methods: Two ruminally-fistulated steers consuming 600 g/kg timothy- and 400 g/kg cracked corn-based concentrate with free access to water and mineral block were used as rumen fluid donors. In vitro batch fermentation, with timothy as a substrate, was conducted for up to 72 h, with Rhus succedanea extracts added to achieve final concentrations of 0, 10, 30, 50, 70, and 90 mg/L. Results: Effective dry matter (DM) degradability rate linearly decreased (p = 0.046) depending on extract dosing levels. Total gas production after 24 to 72 h incubation tended to decrease following extract addition, beginning with 50 mg/L starting dose (significance of quadratic effects: p = 0.006, p<0.001, and p = 0.008 for 24, 48, and 72 h, respectively). Methane production decreased depending on dosing levels following 24 h (p<0.05) and 48 h (p<0.005) incubations and was the lowest with the 50 mg/L dose. The Rhus succedanea extracts increased the abundance of Fibrobacter succinogenes (p<0.05) and Ruminococcus flavefaciens (p = 0.0597) and decreased the abundance of methanogenic archaea (p<0.05) following 24 h incubation. Conclusion: Rhus succedanea was shown to reduce methane production and increase cellulolytic bacteria without any signs of toxic effects and with a minor effect on DM degradability.