• Journal of Ecology and Environment
• /
• v.46 no.3
• /
• pp.259-272
• /
• 2022

Background: The Korean Peninsula exhibits a characteristic graded floral distribution, with northern (Manchurian flora) and southern (China-Japan-Korea flora) lineage species coexisting according to climatic and topographical characteristics. However, this distribution has been altered by climate change. To identify ecosystem changes caused by climate change and develop appropriate measures, the current ecological status of the entire Korean Peninsula should first be determined; however, analysis of the current floral distribution in North Korea has been hampered for political reasons. To overcome these limitations, this study constructed a database of floral distributions in both South and North Korea by integrating spatial information from the previously established National Ecological Survey in South Korea and geocoding data from the literature on biological distributions published in North Korea. It was then applied to analyze the current status and distribution characteristics of Manchurian and China-Japan-Korea plant species on the Korean Peninsula. Results: In total, 45,877 cases were included in the Manchurian and China-Japan-Korea floral distribution database. China-Japan-Korea species were densely distributed on Jeju-do and along the southern coast of the Korean Peninsula. The distribution density decreased as the latitude increased, and the distributions reached higher-latitude regions in the coastal areas compared with the inland regions. Manchurian species were distributed throughout North Korea, while they were densely distributed in the refugia formed in the high-elevation mountain regions and the Baekdudaegan in South Korea. In the current distribution of biomes classified according to the Whittaker method, subtropical and endemic species were densely distributed in temperate seasonal forest and woodland/shrubland biomes, whereas boreal species were densely distributed in the boreal forest biome Korean Peninsula, with a characteristic gradation of certain species distributed in the temperate seasonal forest biome. Factor analysis showed that temperature and latitude were the main factors influencing the distribution of flora on the Korean Peninsula. Conclusions: The findings reported herein on the current floral distribution trends across the entire Korean Peninsula will prove valuable got mitigating the ecological disturbances caused by ongoing climate change. Additionally, the gathered flora data will serve as a basis for various follow-up studies on climate change.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.452-459
• /
• 2022

One of the important factors among the smart farm factors is environmental measurement. This study tried to design an environmental measurement monitoring system through Bluetooth wireless communication with LoRa using the open source programs Arduino, App Inventor, and Node Red. This system consists of Arduino, LoRa shield, temperature and humidity sensor (SHT10), and carbon dioxide sensor (K30). The environmental measurement system is configured as a system that allows the sensor to collect environmental data and transmit it to the user through wireless communication to conveniently monitor the farm environment. As libraries used in the Arduino program, LoRa.h, Sensirion.h, LiquidCrystal_I2C.h and K30_I2C.h were used. When receiving environmental data from the sensor at regular intervals, coding using average value was used for data stabilization. An Android-based app was developed using Node Red and App Inventor program as the user interface. It can be seen that the environmental data for the sensor is well collected with the screen output to the serial screen of Arduino, the screen of the smartphone, and the user interface of Node Red. Through these open source-based platforms and programs will be applied to various agricultural applications.

• Journal of Mushroom
• /
• v.19 no.4
• /
• pp.322-328
• /
• 2021

This study was carried out to evaluate potential of Hypsizygus marmoreus (brown cultivar) as a functional food and drug materials. H. marmoreus were divided into pileus and stipe and extracted in hot water and 80% ethanol. The total polyphenol content was highest in the hot water extracts (pileus 17.15±0.19 mg of GAE g, stipe 7.37±0.16 mg of GAE/g) and pileus compared to the ethanol extracts (pileus 10.23±0.14 mg of GAE/g, stipe 3.76.±0.19 mg of GAE/g) and stipe. Also, hot water extracts of pileus from H. marmoreus (brown cultivar) was more effective DPPH, ABTS, ORAC value, reducing power than ethanol extracts and stipe extracts. The pileus and stipe extracts were confirmed to be non-cytotoxic in the mouse macrophage cell line RAW 264.7 determined by WST-1 (4-[3-(4-iodophenyl)-2-(4-nitrophenyl)-2H-5-tetrazolio]-1,3-benzene disulphonate) assay. Overall, extracts of H. marmoreus (brown cultivar) was higher antioxidant activity than other mushrooms, and no cytotoxicity. Therefore, H. marmoreus (brown cultivar) showed potential as a functional food and drug materials. The brown cultivar of H. marmoreus have higher antioxidant activity than white cultivar, H. marmoreus seem to have different antioxidant activity depending on the cultivar.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.6
• /
• pp.534-540
• /
• 1992

Climatic condition and seeding depth affect the seedling stand and early growth in the direct-seeded rice cultivation on dry soil. This experiment was conducted to elucidate the effects of the day /night temperatures and the seeding depths on the seedling emergence and mesocotyl elongation of rice seed. Three combinations of the day/night temperatures(25/2$0^{\circ}C$ 20/15$^{\circ}C$ and 20/1$0^{\circ}C$) were employed with seeding depths 1, 3, 5 and 7cm at the Phytotron of the Crop Experiment Station in 1991. It appeared that seedling emergence ratio increased and days to seedling emergence decreased in the high temperature (25/2$0^{\circ}C$) and the deep seeding depth (5 and 7cm) condition. The seedling emergence ratio did not. show the, difference up . to the seeding depths of 3cm and below, but the ratio decreased from the seeding depths of 5cm and above. Plant height and leaf number were almost the same up to the depths of 3cm at 30 days after seeding, but those of the seeding depths of 5cm and 7cm were remarkably reduced in all temperature combinations. Mesocotyl and lower internode elongation were seen in the high temperature(25/2$0^{\circ}C$) with the seeding depths of 5cm and 7cm. In the seeding depth of 6cm, of the tested varieties, Tamjinbyeo and Odaebyeo showed the highest emergence ratio. Generally, leaves of all tested varieties appeared approximately in the soil depth of 3cm, so the reasonable seeding depth will be around 3cm in the direct-seeded cultivation on dry soil.

• Journal of Bio-Environment Control
• /
• v.32 no.1
• /
• pp.34-39
• /
• 2023

Growth modeling in plant factories can not only control stable production and yield, but also control environmental conditions by considering the relationship between environmental factors and plant growth rate. In this study, using the expolinear function, we modeled perilla [Perilla frutescens (L.) Britt.] cultivated in a plant factory. Perilla growth was investigated 12 times until flower bud differentiation occurred after planting under light intensity, photoperiod, and the ratio of mixed light conditions of 130 μmol·m^-2·s^-1, 12/12 h, red:green:blue (7:1:2), respectively. Additionally, modeling was performed to predict dry and fresh weights using the expolinear function. Fresh and dry weights were strongly positively correlated (r = 0.996). Except for dry weight, fresh weight showed a high positive correlation with leaf area, followed by plant height, number of leaves, number of nodes, leaf length, and leaf width. When the number of days after transplanting, leaf area, and plant height were used as independent variables for growth prediction, leaf area was found to be an appropriate independent variable for growth prediction. However, additional destructive or non-destructive methods for predicting growth should be considered. In this study, we created a growth model formula to predict perilla growth in plant factories.

• Analytical Science and Technology
• /
• v.21 no.4
• /
• pp.332-337
• /
• 2008

Purification of silica mineral was compared with various leaching methods such as shaking, stirring, ultrasonic with 2.5% HF/HCl solution. Among them, ultrasonic method showed a best leaching effect. From the leaching experiment, Na, K, Fe, Al exist as the major impurity elements. The removal rate of Al, Fe showed little difference with various leaching methods but Ca, Mn, Na were very different. Four kinds of silica mineral (>99% purity) after physical purification treatment were used for ultrasonic leaching experiment. Among them IN-Si had a highest impurity removal rate. Ca, Cr, K, Zn were removed above 80% using ultrasonic leaching method and Fe was also removed above 60%. But Al showed 10~60% removal rate with different samples.

• Analytical Science and Technology
• /
• v.20 no.6
• /
• pp.516-523
• /
• 2007

Purification of silica mineral has been investigated by acid leaching of pulverized silica. A series of studies has been carried out on the effect of leaching silica powder as a function of the leaching time at the constant temperature of $80^{\circ}C$ in oxalic acid, aqua regia, and two mixed acids of HF/HCl, $HF/HNO_3$. The impurities of silica and leachantes were measured by neutron activation analysis (NAA), inductively coupled plasma atomic emission spectrometry (ICP-AES), atomic absorption spectrometry, x-ray fluorescence (XRF) method and wet analysis (WA). Certain metals, such as sodium, calcium, iron, aluminium and titanium, have been found in concentrations of hundreds or even thousands of mg/kg. Comparison of purification processes of silica and analytical methods of impurities in the silica was conducted in this study.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.332-340
• /
• 2023

This study investigated the effects of nanoparticles on the fracture toughness of cement mortar. Three-point bending tests, compressive tests, and slump tests were conducted on cement mortars reinforced with carbon nanotubes(CNTs), nanosilica(NS), and nano calcium carbonate(NC), respectively. Cement mortar with a water-to-cement ratio and a sand-to-cement ratio of 0.45 and 1.5, respectively, and reinforced with 0 and 2 vol.% of 19.5 mm steel fibers, respectively, was used. Reinforcement with nanoparticles partially improved the fracture toughness and compressive strength of the cement mortar. However, in the case of cement mortar reinforced with steel fibers, the reinforcement with nanoparticles was found to reduce the flowability of the mortar, adversely affecting the dispersion of steel fibers, and ultimately leading to a decrease in fracture toughness, contrary to the intended enhancement. Additional research is needed to improve the decrease in mortar fluidity caused by the reinforcement with nanoparticles.

• Journal of The Korean Astronomical Society
• /
• v.56 no.2
• /
• pp.263-275
• /
• 2023

The Sun-Earth Lagrange point L4 is considered as one of the unique places where the solar activity and heliospheric environment can be observed in a continuous and comprehensive manner. The L4 mission affords a clear and wide-angle view of the Sun-Earth line for the study of the Sun-Earth and Sun-Moon connections from he perspective of remote-sensing observations. In-situ measurements of the solar radiation, solar wind, and heliospheric magnetic field are critical components necessary for monitoring and forecasting the radiation environment as it relates to the issue of safe human exploration of the Moon and Mars. A dust detector on the ram side of the spacecraft allows for an unprecedented detection of local dust and its interactions with the heliosphere. The purpose of the present paper is to emphasize the importance of L4 observations as well as to outline a strategy for the planned L4 mission with remote and in-situ payloads onboard a Korean spacecraft. It is expected that the Korean L4 mission can significantly contribute to improving the space weather forecasting capability by enhancing the understanding of heliosphere through comprehensive and coordinated observations of the heliosphere at multi-points with other existing or planned L1 and L5 missions.

• Journal of Industrial Convergence
• /
• v.21 no.9
• /
• pp.77-87
• /
• 2023

The purpose of this study was to examine the effect of social relations satisfaction of low-income middle-aged and elderly single-person households on individual subjective happiness and to verify the mediating effect of depression and gender control to provide basic data for the development of related policies and programs. The SPSS WIN 25.0 program used frequency analysis, technical statistics analysis, correlation analysis, and PROCESS MACRO Model Number 4 to verify the mediating effect of 482 middle-aged singleperson households extracted using the "17th Korea Welfare Panel in 2022" survey data. In addition, the control effect was verified using PROCESS MACRO Model Number 1. The results of the study first showed that social relationship satisfaction after controlling demographic characteristics had a positive effect on subjective happiness. Second, it was found that depression had a partial mediating effect in the relationship between social relationship satisfaction and subjective happiness. Third, it was found that the higher the satisfaction level of social relationships among women than men, the greater the sense of happiness. Through this study, it is meaningful in that it identified the meaning of social relationships of middle-aged and elderly single-person households and presented practical implications so that they can be used as basic data for policy support measures.