• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.251-257
• /
• 2003

In this paper, a new distributed intelligent control module based on LonWorks fieldbus for air handling unit(AHU) of heating, ventilating and air-conditioning(HVAC) is proposed to replace with a conventional direct digital control(DDC) with 32 bit microprocessor. The proposed control architecture has a excellent features such as highly compact and flexible function design, a low priced smart front-end and reliable performance with various functions. This also addresses issues in control network configuration, logical design of field devices by S/W tool, Internet networking and electronic element installation. Experimental results showing the system performance are also included in this paper.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.709-711
• /
• 2016

An automatic control system to control a machinery system is managed by the PLC(Program Logic Control) and measured a machinery status from the sensor information to improve productivity in the industry field. This paper to propose a diagnostic monitoring system consists of a relay module, a one-chip processor module and a computer monitoring system. To improve productive capacity, the system is to check an auxiliary relay's trouble by a real-time monitoring.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.115-118
• /
• 2000

A microfabricated cell chip was developed to evaluate drug effect on mouse B16-F1 melanoma cell line. The cell chip system consists of 8-well culture cartridge incorporated with interdigitated array gold electrodes on each well, lock-in amplifier, 8-well cell scanner and computer as a system controller. Impedance of an electrode is increased according to adherent cell growth on the electrode surface. In order to verify investigated. The change of impedance was measured differentially between a control electrode containing only media and cell-cultured sample electrodes with time.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.4
• /
• pp.423-431
• /
• 2008

The control surveying which aims at identifying the coordinate system of satellite images with that of ground is a repeatedly performed essential process to produce digital ortho - photos and it acts as the main factor to increase the production cost of the photos by duplicated budgets and redundant works when executing the projects for acquiring basic geographical information from high density satellite images. During the experimentation, an application system was established for producing a stereo image chip by the analysis of DPPDB file structure, the stereo image chip was produced with SPOT and IKONOS images, the analysis of 3D modeling accuracy was performed to secure the required accuracy and to present the optimal number and deployment of the control points, and a 3D modeling was performed for new SPOT images and lastly, 3D ground coordinates were extracted by the observation of the same points through the overlapping with the new images. As the results of the research, it is proved that the stereo image chip can be used as the ground controls through the accuracy analysis between the coordinates of the images and the ground, close results were obtained between the coordinates by the ground survey and those by the 3D modeling using new images and the observation of the same points, positional changes were not found during observing the same points, and the research presented the methodology for improving the process of the control survey by showing the availability of the image controls on the stereo image chip instead of the ground controls.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.2
• /
• pp.80-86
• /
• 2011

This paper presents an integrated variable amplitude high voltage pulse generation circuit with low power and small size for driving industrial piezoelectric printer heads. To solve the problems of large size and power overhead of conventional pulse generators that usually assembled with multiple high-cost discrete ICs on a PCB board, we have designed a new integrated circuit (IC) chip. Since all the functions are integrated on to a single-chip it can achieve low cost and control the high-voltage output pulse with variable amplitudes as well. It can also digitally control the rising and falling times of an output high voltage pulse by using programmable RC time control of the output buffer. The proposed circuit has been designed and simulatedd in a 180[nm] Bipolar-CMOS-DMOS (BCD) technology using HSPICE and Cadence Virtuoso Tools. The proposed single-chip pulse generation circuit is suitable for use in industrial printer heads requiring a variable high voltage driving capability.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.10
• /
• pp.903-910
• /
• 2000

In this paper, we describe a slave chip based on the Profibus-DP protocol and a system board to verify the developed slave chip. The Profibus-DP protocol is designed using VHDL and implemented on FPGA. The system board adopting the developed FPGA is designed FPGA is designed in which the firmware is implemented on Intel 8051 by using C language. Among the Profibus-DP protocols, low level layers from the physical layer to the data link layer is implemented in the form of hardware that we are able to greatly reduce the CPU load in processing protocols, and then higher layers could be processed by software. These technologies result in an IP to make terminal devices in the distributed control systems. Therefore, many digital logics as well as communication logics can be implemented onto SOC(System On a Chip) and it could be applied to various fieldbus-related areas.

• ETRI Journal
• /
• v.37 no.6
• /
• pp.1176-1187
• /
• 2015

This work proposes a highly efficient sensorless motor driver chip for various permanent-magnet synchronous motors (PMSMs) in a wide power range. The motor driver chip is composed of two important parts. The digital part is a sensorless controller consisting mainly of an angle estimation block and a speed control block. The analog part consists of a gate driver, which is able to sense the phase current of a motor. The sensorless algorithms adapted in this paper include a sliding mode observer (SMO) method that has high robust characteristics regarding parameter variations of PMSMs. Fabricated SMO chips detect back electromotive force signals. Furthermore, motor current-sensing blocks are included with a 10-bit successive approximation analog-to-digital converter and various gain current amplifiers for proper sensorless operations. Through a fabricated SMO chip, we were able to demonstrate rated powers of 32 W, 200 W, and 1,500 W.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.2
• /
• pp.162-172
• /
• 1991

In proportion to the capacity enlargement of the induction motor system controlled by current source inverter, the capacitance of the commutating capacitor is enlarged and then the spike value of output voltage is increased at the moment of charge and discharge. Moreover, the output currnet includes a number of harmonic components. Such voltage spike and harmonics generate the torque ripple and lead to bad effects on the performance of the induction motor. In this study, all the harmonics excluding 17th and 19th harmonics were mostly elimunated by adopting 18-phase Triple High Frequency Current Source Inverter(HFCSI), and the spike component of output voltage was reduced by adding the Voltage Clamping Circuit(VCC). As a result, the torque ripple and the commutation loss were reduced and the performance of the system was improved. Experiments for speed control were carried out in the tripple current source inverter system for induction motor drive. Overall system was controlled by ONE CHIP MICROCOMPUTER(INTEL 8751). Control circuits were simplified and good experimental results in the constant V/F control were obtained due to the flexibility of the microcomputer.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.5
• /
• pp.65-71
• /
• 2016

Bluetooth technology(BT) is a standard for short distance wireless communication and widely used to connect and control various electronic and telecommunication devices without wires, where CSR8670 chip is generally adopted. These BT devices are required to comply with BT specification and the equipments for conformance test are also important. However, the existing BT testing methods have inconvenience in that they are mostly time-consuming procedure due to not only repetitive execution for each evaluation element but also error-prone nature of manual experiments. This paper proposes an automated BT communication test method using CSR8670 chip, which solves the problems related to manual testing methods. The proposed method can reduce the development period of BT products and guarantee the quality improvement owing to the exact system error detection capability.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.399-402
• /
• 2004

This paper presents a system-on-chip prototype implementing a full integration for a portable digital audio system. The chip is composed of a audio processor block to implements audio decoding and voice compression or decompression software, a system control block including 8-bit MCU core and Memory Management Unit (MMU) a low power 16-bit ${\Sigma}{\Delta}$ CODEC, two DC-to-BC converter, and a flash memory controller. In order to support other audio algorithms except Mask ROM type's fixed codes, a novel 16-bit fixed-point DSP core with the program-download architecture is proposed. Funker, an efficient power management technique such as task-based clock management is implemented to reduce power consumption for portable application. The proposed chip has been fabricated with a 4 metal 0.25um CMOS technology and the chip area is about 7.1 mm ${\times}$ 7.1mm with 100mW power dissipation at 2.5V power supply.