• 대한전자공학회논문지SP
• /
• 제40권1호
• /
• pp.43-50
• /
• 2003

오늘날 멀티미디어의 응용이 크게 늘면서 영상 취득 장치의 수요가 증대되고 있다. 그중 필름 스캐너는 고해상도와 고화질의 디지털 영상을 취득할 수 있는 장치이다. 그러나 필름 스캐너에서는 광원 및 센서의 비선형적 특성으로 인해 원 필름 영상의 컬러와 스캔된 영상의 컬러가 정확히 일치하지 않는 문제가 발생한다. 따라서, 필름 스캐너에서는 스캔된 디지털 영상에 대한 색보정이 필수적이다. 본 논문에서는 스캔된 RGB 색공간의 데이터를 CIE L/sup */a/sup */b/sup */ 색공간으로 변환한 후 다항회귀를 이용하여 색보정한다. 또한, TMS320C32 DSP 칩과 고해상도 라인 센서를 사용하여 R, G, B 각각 12 비트의 색분해도와 2400 dpi 급의 해상도를 갖는 스캐너 하드웨어를 구현하였다. 제작한 스캐너의 색보정 성능을 평가하기 위한 실험 결과, 색보정 전에는 평균색차 (ΔE/sup *//sub ab/)가 13.48 이었던 것이 색보정 후에는 8.46으로 감소함을 확인하였다.

• 한국산학기술학회논문지
• /
• 제11권1호
• /
• pp.61-66
• /
• 2010

본 논문은 LED감성조명장치를 개발하여 뇌파 파장과 조명의 색온도 변화에 따른 상관관계를 뇌파실험을 통해 측정하였다. 이를 위해 장치개발을 통한 열 해석과 뇌파실험의 두 부분으로 실험을 하였다. LED감성조명장치의 모듈은 메탈 PCB에 Chip LED를 배치하여 COMSOL Multiphysics로 열 해석 결과 LED와 PCB의 경계면 온도는 약 $80^{\circ}C$이며, PCB의 바닥면까지는 약 $50^{\circ}C$까지 변화함을 검증 하였으며, 결과적으로 실 제작의 근사치에 가까운 방열설계가 가능함이 확인 및 적합한 조명기구로 판정되었으며, 뇌파측정을 위해 색온도를 $2,300^{\circ}K$, $4,000^{\circ}K$, $6,000^{\circ}K$ 세가지 조건으로 피 실험자의 기본상태(휴식, 주의력, 집중력)를 측정 하였으며 그 결과 색온도가 낮을수록 편안함과 안락함을 느낀다는 것을 검증 할 수 있었다. $4,000^{\circ}K$의 조건으로 실험을 했을 때 주의력의 지수가 약간 높아짐을 볼 수 있는데 이는 $4,000^{\circ}K$가 우뇌의 기능을 활성화 시킬 수 있는 추론이 가능하며 $6,000^{\circ}K$이상에서는 일반 형광등 아래의 색온도와 유사함으로 상태가 변화되지 않았음을 알 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2696-2699
• /
• 2008

Microfluidic chips have been frequently utilized to perform biochemical analysis, like cell culture, because they reduce the consumptions of analytes and reagents and automate multi-step analysis processes. It is often critical to monitor temperature in a microchannel for the analyses in order to control a reaction condition of bio or chemical molecules. We propose a novel method to monitor temperature of a microchannel flow by using polydiacetylene (PDA), a conjugated polymer, that has a unique property to transform its color from visible blue to fluorescent red by thermal stress. We inject PDA sensor droplets generated by hydrodynamic instability into a microchannel with a microheater incorporated on the channel bottom. Also, we change the channel temperature by providing the different electric power to the microheater. The results show that the florescence intensity of PDA sensor droplets linearly increases in response to the flow temperature increase within a certain range.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1995년도 춘계학술대회
• /
• pp.164-166
• /
• 1995

The objectives of study are to develop a peripheral device on the endoscopic surgery system. These systems are consist of the following units. They are a color monitor of high resolution, light source, computer system and endoscopic camera with a C-mount head, irrigator, color video printer, Super VHS recorder and a system rack. The color monitor is a NTSC monitor for monitoring the image projected of the surgical section. The lightsource is necessary to irradiate the interior of a body via an optic fiber, The light projector will adapt the brightness in accordance with changing distance from the object. A miniature camera using a color CCD chip and computer system is used to capture and control an image of the surgical section[1]. The video printer is a 300 DPI resolution using thermal sublimation methods, which is developed by Samsung Electronics Co., Ltd. The specification of the endoscopic data management system is consist of storage of a captured image and pathological database of patients [2-4].

• 한국기계가공학회지
• /
• 제20권10호
• /
• pp.112-118
• /
• 2021

In this study, an inspection method using a color image is proposed to conduct a real-time inspection of covalent organic framework (COF) films to detect defects, if any. The COF film consists of an upper pattern SR and a lower PI. The proposed system detects the defects of more than 20 ㎛ on the SR surface owing to the characteristics of the pattern, whereas on the PI surface, it detects defects of more than 4 ㎛ by utilizing a micro-optical system. In the existing system, it is difficult for the operator to conduct a full inspection through a high-performance microscope. The proposed inspection algorithm performs the inspection by separating each color component using the color contrast of the pattern on the SR side, and on the PI surface it inspects the bonding state of the mounted chip. As a result, it is possible to confirm the exact location of the defects through the SR and PI surface inspections in the implemented inspection.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2020년도 춘계학술대회
• /
• pp.120-120
• /
• 2020

Based on the simple sequence repeat (SSR) marker, a Korean wheat core collection were established with 616 wheat accessions. Among them, the SNP genotyping for the entire genome was performed using DNA chip array to clarify the whole genome SNP profiles. Consequently, a total of 35,143 SNPs were found and we re-established a mini-core collection with 247 accessions. Population diversity and phylogenetic analysis revealed genetic diversity and relationships from the mini core set. In addition, genome-wide association study (GWAS) was performed on 19 phenotypic traits; ear type, awn length, culm length, ear length, awn color, seed coat color, culm color, ear color, loading, leaf length, leaf width, seeding stand, cold damage, weight, auricle, plant type, heading stage, maturation period, upright habit, and degree of flag leaf. The GWAS was performed using the fixed and random model circulating probability unification (FarmCPU), which identified 14 to 258 SNP loci related to 19 phenotypic traits. Our study indicates that this Korean wheat mini-core collection is a set of germplasm useful for basic and applied research with the aim of understanding and exploiting the genetic diversity of Korean wheat varieties.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권8호
• /
• pp.1218-1223
• /
• 2003

The effects of type (high and low voltages) and time (3, 40 and 60 min postmortem) of stimulation on drip loss and meat color at 24 h post-mortem were determined on M. longissimus dorsi of 38 crossbred steers and heifers. In addition, the effect of pH early postmortem (70 min postmortem) on the rate and extend of meat tenderization was examined. Either high or low voltage stimulation at 3 min showed a tendency for faster pH decline (p=0.052) and higher drip loss (p=0.08), and improved the color dimensions of L*, a* and b* (p<0.01), compared to stimulation at 40 min. This was equivalent to approximately one unit of an AUSMEAT color chip. On the other hand, although there were significant differences in pH decline between high voltage stimulation at 40 and 60 min, and between low voltage stimulation at 40 min and control sides, drip loss and meat color did not differ significantly (p>0.05). The results suggested that early application of stimulation, regardless of type of stimulation, improved overall meat color at 24 h postmortem through its effect on faster glycolysing rate. However, if the pH decline was moderate, the benefit of electrical stimulation on meat color was not apparent. An intermediate pH decline resulted in the lowest shear force. Due to differential ageing rates the optimum pH at 70 min postmortem increased with ageing time from 5.96, 6.07, 6.12 and 6.14 for 1, 3, 7 and 14 days postmortem, respectively. This implied that a small difference in the rate of pH decline was important, especially carcasses stimulated for very early postmortem, and the optimum rate of pH decline varied with intended ageing period. The study suggests that the beneficial or adverse effects of electrical stimulation on drip loss, meat color and tenderness is determined by the rate of pH decline, rather than by stimulation treatment and time of application per se.

• 한국생활과학회지
• /
• 제24권2호
• /
• pp.267-284
• /
• 2015

The purpose of this study is to extract the color chip from the works of Matisse with the exotic tastes, to analyze the characters of adjacent colors, and to suggest the color coordination of artistic character. The research method is based on the literature study which analyzes visual materials. The results are as follows. Considering the colors of Japanese taste, He employs vivid and strong tone in red, yellow, and blue, light tone in pink, purple, and green and deep tone in green, purple, blue and black. His color scheme is very bold and splendid. In his Algerian taste, red is very popular, but an attention should be paid in his development of orange and blue tones. In general, the usage of various tones brings colors into less relief and make the contrast of tones more conspicuous. His Spanish taste, based on red and orange, attracts attentions with strong impressions, but sometimes, dark or adjacent pale tones creates strong, mild and murky atmosphere. The Moroccan taste, based on the development of blue tones which have strong attraction implies the lightness but represents silent and calm. The Rumanian taste, represented in primary colors of red, yellow and blue and achromatic colors is bright and clear. In addition, its light tone in various colors represents peace and romance. The coordination of the exotic colors with the unique adjacent colors created by Matisse is not based on the established color coordination theory, but extracts colors in the aspect of culture borrowing. Therefore, it can double the effects of the color scheme expressed in the existing designs and be used as the global and multi-cultural design sources.

• 전자공학회논문지
• /
• 제53권5호
• /
• pp.111-120
• /
• 2016

칩 상에서 연결을 담당하는 와이어의 인식은 칩 역공학에서 가장 중요한 부분 중 하나이다. 칩 사진에서 인식된 와이어는 칩 회로의 논리 수준 또는 기능 수준 표현을 복원하는데 사용된다. 기존의 칩 역공학에서 주로 사용되는 수작업에 의한 와이어 인식은 정확한 결과를 제공하지만, 한 칩이나 블록에 속한 와이어의 수가 수십 만개 또는 그 이상이 될 경우 너무 많은 시간이 걸리는 단점이 있다. 칩 상의 와이어는 그 재료에 따라 특정한 밝기나 색상 특성을 가지고 있다. 따라서, 본 논문에서는 칩 사진에 나타나는 영역의 밝기나 색상 특성을 이용하여 와이어 여부를 판단하는 2단계 방법을 제안한다. 즉, 이미지 이진화 과정과 이진 이미지에 나타나는 영역에 대한 와이어 여부를 판단하는 과정으로 이루어진다. 활용되는 기법들은 기존에 제안된 기법들을 이용한다. 둘째 단계에서, 와이어 영역의 특성을 지정해주기 위해서 사용자는 특정 와이어 영역을 선택하는 과정을 수행해야 한다. 선택된 와이어 영역의 히스토그램 특성은 다른 영역과의 히스토그램 유사도를 계산하는 데 사용된다. 첫 번째 실험은, 기존에 제안된 몇 가지 이미지 이진화 기법 중에서 둘째 단계를 위해 적절한 한 가지 기법을 선택하기 위한 것이다. 와이어 영역 판별 방법에 대한 둘째 실험은, 실험적으로 비교 가능한 기존 방법이 없는 관계로, 본 논문에서 제안하는 그레이 스케일 또는 HSV 컬러를 이용하는 히스토그램 유사도 비교 방법 세 가지에 대한 비교 실험 결과를 제시한다. 제일 성능이 좋은 방법은, 와이어 영역으로 판단한 영역이 진짜 와이어 영역인 비율이 98% 이상임을 확인하였다.

• ETRI Journal
• /
• 제25권5호
• /
• pp.288-296
• /
• 2003

In this study, we present a 260k color TFT LCD driver chip set that consumes only 5 mW in the module, which has exceptionally low power consumption. To reduce power consumption, we used many power-lowering schemes in the logic and analog design. A driver IC for LCDs has a built-in graphic SRAM. Besides write and read operations, the graphic SRAM has a scan operation that is similar to the read operation of one row-line, which is displayed on one line in an LCD panel. Currently, the embedded graphic memory is implemented by an 8-transistor leaf cell and a 6-transistor leaf cell. We propose an efficient scan method for a 6-transistor embedded graphic memory that is greatly improved over previous methods. The proposed method is implemented in a 0.22 ${\mu}m$ process. We demonstrate the efficacy of the proposed method by measuring and comparing the current consumption of chips with and without our proposed scheme.