• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.10
• /
• pp.17-25
• /
• 2005

A grid adaptation method within systems of chimera and patched grids is presented. Problem domains are divided into near-body and off-body fields. Near-body field is filled with curvilinear body-fitted grids that extend only a short distance from body surfaces and connected to other grid systems via chimera domain connectivity method. Off-body field is filled with patched uniform cartesian grids of varying levels of refinement. This method gives flexibility in grid generation and efficient adaptation capability. Several numerical experiments including 2D store separation were performed to show the performance of the proposed adaptation method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.10
• /
• pp.669-676
• /
• 2022

In this paper, the carriage load analyses of stores installed on aircraft are conducted to validate the chimera grid method applied to an unstructured CFD solver, UMSAPv. First, the chimera grid method of UMSAPv is verified for the well-known Eglin Wing/Pylon/Finned store problem. Next, an angle of attack sweep of F/A-18C clean configuration is conducted at a subsonic speed. The computed results are compared with the results of the previous study using MSAPv, a structured CFD solver, to show the validity of Umsapv. Finally, the carriage of F/A-18C JDAM is carried out with a chimera grid as well as a single block grid. The computed results are compared with other computational, experimental and the flight tests.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.8
• /
• pp.719-727
• /
• 2008

A 3-D compressible Navier-Stokes solver using overlapped grids is developed to predict a flow-field around a hovering rotor. The flow solver is verified by a parametric study with the grid spacing of wake grid, spatial accuracy and turbulence model. Computations are performed with different Chimera grid systems. Computational results are compared with the experimental data of Caradonna et al. for both blade loading and the tip vortex behavior. Numerical results show good agreements with experiments for the distribution of surface pressure and tip vortex behavior. Pressure distributions over the blade have marginal differences for different numerical methods, whereas large discrepancies are seen in the prediction of the wake behavior. Results unexpectedly show that the vortex strength from an automated cut-paste Chimera grid is weaker than that from the conventional Chimera grid.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.8
• /
• pp.1-7
• /
• 2006

In the present study, A 3-D chimera technique for overlapped bodies in relative motion is studied using unstructured meshes. If all node points of a mesh element at solid boundary are in another body, this element is excluded from computational domain. For computation of unsteady flow, non-active cells have proper variables using interpolation and extrapolation. These variables are used in next time step. The motion of a launching trajectory ejected from a wing and the motion of deploying fins of a trajectory which have not been simulated are computed to conform practicality of this technique.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.04a
• /
• pp.17-22
• /
• 2007

Chimera grid Method is widely used in Computational Fluid Dynamics due to its simplicity in constructing grid system over complex bodies. Especially, Chimera grid method is suitable for unsteady flow computations with bodies in relative motions. However, interpolation procedure for ensuring continuity of solution over overlapped region fails when so-call orphan cells are present. We have adopted MLS(Moving Least Squares) method to replace commonly used linear interpolations in order to alleviate the difficulty associated with orphan cells. MSL is one of interpolation methods used in mesh-less methods. A number of examples with MLS are presented to show the validity and the accuracy of the method.

• Journal of computational fluids engineering
• /
• v.13 no.1
• /
• pp.49-56
• /
• 2008

Chimera grid methods have been widely used in Computational Fluid Dynamics due to its simplicity in constructing grid systems over complex bodies, and suitability for unsteady flow computations with bodies in relative motion. However, the interpolation procedure for ensuring the continuity of the solution over overlapped regions fails when the so-called orphan cells are present. We have adopted the MLS(Moving Least Squares) method to replace commonly used linear interpolations in order to alleviate the difficulty associated with the orphan cells. MLS is one of the interpolation methods used in mesh-less methods. A number of examples with MLS are presented to show the validity and the accuracy of the method.

• Journal of computational fluids engineering
• /
• v.5 no.2
• /
• pp.9-19
• /
• 2000

Transient aerodynamic response of an airfoil to a moving plane-flap is numerically investigated using the two-dimensional Euler equations with conservative Chimera grid method. A body moving relative to a stationary grid is treated by an overset grid bounded by a 'Dynamic Domain Dividing Line' which has an advantage for constructing a well-defined hole-cutting boundary. A conservative Chimera grid method with the dynamic domain-dividing line technique is applied and validated by solving the flowfield around a circular cylinder moving supersonic speed. The unsteady and transient characteristics of the flow solver are also examined by computations of an oscillating airfoil and a ramp pitching airfoil respectively. The transient aerodynamic behavior of an airfoil with a moving plane-flap is analyzed for various flow conditions such as deflecting rate of flap and free stream Mach number.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.2
• /
• pp.17-25
• /
• 2006

In the present study, a 2-D chimera technique for overlapped bodies in relative motion is developed using unstructured triangular meshes. The solid boundary nodes located next to the intersecting point between bodies are merged to the intersecting point to assure accurate representation of the intersecting region. In order to assign proper value of flow variables at the nodes located out of the computational field, interpolation is conducted for non-active nodes. For validation, the motions of a NACA64A006 airfoil and a NACA0012 airfoil with a plane flap are computed and the results are compared with other simulations. The motion of a launching missile ejected from a NACA0012 airfoil is also simulated.

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.1-10
• /
• 2002

Flow computations around forward sweep wing small aircraft have been conducted in this study. The main-wing of the forward-wing small aircraft is composed of two planforms: the inboard wing section with backward sweep angle which is known as strake and the outboard wing section with forward sweep angle. The geometrical discontinuity or kink generated by the combination of these two different planforms requires detailed flow analysis around wing. Four different solvers were used to calculate aerodynamic data and the accuracy of each method is examined. For the convenience of grid generation over the aircraft geometry, the overset grid method was applied. Through this calculation, the basic aerodynamic data of the forward-wing aircraft were provided and the aerodynamic characteristics of the wing is expounded.

• Journal of computational fluids engineering
• /
• v.17 no.1
• /
• pp.70-77
• /
• 2012

In this paper, diagonal implicit harmonic balance method with overset grid technique is applied to analyze helicopter rotor blade flow in hover and forward flight condition. The chimera grid need interpolation time with sub-grid and background grid in moving problem such as forward flight on every time step. Present method is available enough to reduce the grid module interpolation time. In order to demonstrate present method, Caradonna & Tung's and AH-1G rotor blades are used and the results are compared to other researchers' result and experimental data.