• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.3
• /
• pp.299-311
• /
• 2022

Rocks exposed to the surface are subject to long-term weathering, and such effects weaken their engineering stability. Especially as weathering progresses, the surface of rocks will be changed by weathering, and such surface changes will affect the engineering safety of the rock mass. In addition, the chemical species produced in the weathered rock have a direct effect on the surrounding environment or on the structure. In areas where rocks are exposed, such as mining areas, chemical species produced by weathering can have a serious impact on the surrounding natural environment. In this study, accelerated weathering experiments using freeze/thaw system were conducted on rocks that had already been weathered and fresh rocks, and surface changes of each rock were observed with confocal laser scanning microscope (CLSM), and chemical species were analyzed using IC/ICP-MS. As the weathering progressed, the surface roughness decreased, and the amount of chemical species produced increased. The results of this study can be used as basic data for evaluating engineering/environmental safety in areas where rocks are exposed.

• Proceedings of the Microbiological Society of Korea Conference
• /
• 2008.05a
• /
• pp.118-118
• /
• 2008

The phylogenetic diversity of microbial communities in calcareous mats from Spearfish Creek, a freshwater stream located in the Black Hills of South Dakota, was examined using PCR-based 16S rDNA sequence analysis. In this study, two types of calcareous mats were compared: mature mats formed on the natural substrate of rock surfaces and developing mats on an artificial substrate of glass slides. Among 63 unique isolates from a clone library of 16S rRNA genes from mature mat samples, there were 8 phyla of Bacteria represented. The predominant phylum was Proteobacteria (48%), with the $\beta$ subclass being the largest group. Denaturing gradient gel electrophoresis (DGGE) analysis of 16S rRNA genes from slide samples collected at intervals for four months showed considerable diversity of the microbial community from the earliest stages of community development. Amplicons isolated from DGGE gels and sequenced indicated that community succession has occurred without increasing microbial diversity. However, light microscopic analysis revealed a significant increase in microbial cell density throughout the community development. Scanning electron microscopy of mat samples provides evidence that diatoms are also important members of calcareous mat communities.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.2
• /
• pp.21-28
• /
• 2019

Handmade hydrated lime has been used for preservation and repair of architectural heritage in Korea. However, the effect of the amount of water used for slaking quicklime on the physical and chemical properties of the hydrated lime, which is the result of the slaking process, has not been clearly understood. In this study, particle size distribution, chemical composition and crystalline phases of the hydrated lime are investigated by varying the amount of water used for the slaking. In addition, temperature history during the slaking process is examined. For this, various experiments, such as laser diffraction analysis, X-ray fluorescence, X-ray diffraction, thermogravimetric analysis, and temperature recording using a thermocouple, were performed. When the quicklime came into contact with water, its temperature reached $100^{\circ}C$ within 10 min due to sudden exothermic reaction of calcium oxide, and this temperature was maintained for about 30 min. The water to lime ratio influenced the cooling rate during the slaking process; that is, the more water was used, the longer it took to reach an ambient temperature. The amount of water for the slaking did not have a noticeable effect on the contents of major components of the hydrated lime such as calcium hydroxide and calcium carbonate, but when slaked with more amount of water, average particle size of the lime tended to decrease. The experimental results in this study can be used as references for developing guidelines on the safety or appropriate amount of water in the lime slaking process.

• Journal of the Korean Chemical Society
• /
• v.23 no.5
• /
• pp.307-313
• /
• 1979

Seven new hydrazine derivatives were prepared from N-Aryllsufonylbenzimidoyl chloride. These were: ${\beta}-({\alpha}-Benzenesulfonamidobenzal)hydrazine\;(II),\;{\beta}-({\alpha}-Benzenesulfonamidobenzal)dimethylmethylenehydrazine\;(III),\;{\beta}-({\alpha}-Benzenesulfonamidobenzal)phenylhydrazine\;(VII),\;{\beta}-({\alpha}-Benzenesulfonamidobenzal)-4-nitrophenylhydrazine\;(VIII),\;{\beta}-({\alpha}-Benzenesulfonamidobenzal)-2,4-dinitrophenylhydrazine\;(IX),\;{\beta}-({\alpha}-Benzenesulfonamidobenzal)dimethylhydrazine\;(X),\;{\beta}-({\alpha}-Benzenesulfonamidobenzal)-p-methylphenylhydrazine\;(XI)$. The structure of these derivatives were identified by elemental analysis, spectral data and other chemical methods. In general, it was found that the yields of these reactions were significantly improved in polar solvent and by the electron attracting substituents in phenylhydrazine.

• Carbon letters
• /
• v.12 no.3
• /
• pp.171-176
• /
• 2011

Polyacrylonitrile-based carbon nanofibers (CNFs) containing Ti and Mn were prepared by electrospinning. The effect of metal content on the hydrogen storage capacity of the nanofibers was evaluated. The nanofibers containing Ti and Mn exhibited maximum hydrogen adsorption capacities of 1.6 and 1.1 wt%, respectively, at 303 K and 9 MPa. Toward the development of an improved hydrogen storage system, the optimum conditions for the production of metalized CNFs were investigated by characterizing the specific surface areas, pore volumes, sizes, and shapes of the fibers. According to the results of Brunauer-Emmett-Teller analysis, the activation of the CNFs using potassium hydroxide resulted in a large pore volume and specific surface area in the samples. This is attributable to the optimized pore structure of the metal-containing polyacrylonitrile-based electrospun CNFs, which may provide better sites for hydrogen adsorption than do current adsorbates.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2546-2552
• /
• 2012

A novel biguanide-functionalized $Fe_3O_4/SiO_2$ magnetite nanoparticle with a core-shell structure was developed for utilization as a heterogeneous organosuperbase in chemical transformations. The structural, surface, and magnetic characteristics of the nanosized catalyst were investigated by various techniques such as transmission electron microscopy (TEM), powder X-ray diffraction (XRD), vibrating sample magnetometry (VSM), elemental analyzer (EA), thermogravimetric analysis (TGA), $N_2$ adsorption-desorption (BET and BJH) and FT-IR. The biguanide-functionalized $Fe_3O_4/SiO_2$ nanoparticles showed a superpara-magnetic property with a saturation magnetization value of 46.7 emu/g, indicating great potential for application in magnetically separation technologies. In application point of view, the prepared catalyst was found to act as an efficient recoverable nanocatalyst in nitroaldol and domino Knoevenagel condensation/Michael addition/cyclization reactions in aqueous media under mild condition. Additionally, the catalyst was reused six times without significant degradation in catalytic activity and performance.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.10
• /
• pp.1572-1576
• /
• 2006

A dimeric precursor, $[Cu(dmae)(OCOCH_3)(H_2O)]_2$ for the CVD of copper metal films, (dmaeH = N,N-dimethylaminoethanol) was synthesized by the reaction of copper(II) acetate monohydrate ($Cu(OCOCH_3)_2{\cdot}H_2O$) and dmaeH in toluene. The product was characterized by m.p. determination, elemental analysis and X-ray crystallography. Molecular structure of $[Cu(dmae)(OCOCH_3)(H_2O)]_2$ shows that a dimeric unit $[Cu(dmae)(OCOCH_3)(H_2O)]_2$ is linked to another through hydrogen bond and it undergoes facile decomposition at 300 C to deposit granular copper metal film under nitrogen atmosphere. The decomposition temperature, thermal behaviour, kinetic parameters, evolved gas pattern of the complex, morphology, and the composition of the film were also investigated.

• Mass Spectrometry Letters
• /
• v.8 no.4
• /
• pp.90-97
• /
• 2017

Androgenic anabolic steroids (AASs) are synthetic derivatives of testosterone with a common structure containing cyclopentanoperhydrophenanthrene nucleus. Their use enhances the muscle building capacity and is beneficial during performance. The AASs are one of the most abused group of substances in horse doping. Liquid chromatography tandem mass spectrometry ($LC/MS^n$) has been successfully applied to the detection of anabolic steroids in biological samples. However, the saturated hydroxysteroids viz: nandrolone, $5{\alpha}-estrane-3{\beta}$, $17{\alpha}-diol$ exhibit lower detection responses in electrospray ionisation (ESI) because of their poor ionisation efficiency. To overcome this limitation pre-column chemical derivatization has been introduced to enhance their detection responses in $LC-ESI-MS^n$ analysis. The aim of present study was to develop a sensitive method for identification and confirmation of nandrolone and its metabolite in horse urine incorporating pre-column derivatization using picolinic acid. The method consists of extraction of targeted steroid conjugates by solid phase extraction (SPE). The eluted steroid conjugates were hydrolysed by methanolysis and free steroids were recovered with liquid-liquid extraction. The resulting steroids were derivatized to form picolinoyl esters and identification was done using LC-ESI-MS/MS in positive ionization mode. The picolinated steroid adduct enhanced the detection levels in comparison to underivatized steroids.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.4
• /
• pp.614-618
• /
• 2005

The complex of the composition LaL(N$O_3)_3\;(H_2O)_2$ is prepared by the reaction of La($NO_3)_3{\cdot}6H_2O$ with Nethylmorpholine in aqueous medium. The ligand is involved in the complex as a neutral species where the chelation occurs via the oxygen of the ligand moiety and the nitrate groups as bidentate ligand. The chemical structure of the studied complex is confirmed through IR, XRD, and thermal analysis data. The complexation equilibria of La(III) with N-ethylmopholine is studied in aqueous medium at ionic strength I = 0.1 mol${\cdot}dm^{-3}\;KNO_3$ and at 25, 35 and 45 ${^{\circ}C}$, respectively. The thermodynamic parameters $\Delta$G, $\Delta$H and $\Delta$S values were calculated to prove the association with the complex formation. It is clearly observed that the process is accompanied by absorption of heat, i.e. endothermic process, while the entropy does not change greatly attributed to the release of constant number of water molecules during chelate formation.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3405-3410
• /
• 2011

We have investigated the cytotoxic potential of tellurium (Te) nanowires in BALB/3T3 fibroblast cells. Te nanowires were synthesized through an aqueous phase surfactant assisted method. Toxicological experiments, such as analysis of morphological changes, MTT assay, DAPI staining, and estimation of intracellular reactive oxygen species, were carried out to reveal the cytotoxic effects of Te nanowires. Te nanowires were found to be cytotoxic at all concentrations tested, in a dose-dependent manner. The UV/Vis spectra of Te nanowires suspended in a culture medium showed drastic changes and disappearance of two broad absorption peaks. The physicochemical properties such as, surface charge, size, and shape of Te nanowires were found to be altered during exposure of cells, due to the instability and agglomeration of nanowires in the culture medium. These results suggest that the chemical components of the DMEM medium significantly affect the stability of Te nanowires. In addition, TEM images revealed that necrosis was the basic pattern of cell death, which might stem from the formation of toxic moieties of tellurium, released from nanowire structures, in the bioenvironment. These observations thus suggest that Te nanomaterials may pose potential risks to environmental and human health.