• 대한화학회지
• /
• 제49권2호
• /
• pp.189-195
• /
• 2005

• Korean Journal of Chemical Engineering
• /
• 제35권12호
• /
• pp.2496-2503
• /
• 2018

The short-term stability of high efficiency polymer : nonfullerene solar cells was investigated by employing a quick (ten cycles) current density-voltage (J-V) cycling method. Polymer : nonfullerene solar cells with initial power conversion efficiency (PCE) of >10% were fabricated using bulk heterojunction (BHJ) films of poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)-benzo[1,2-b:4,5b']dithiophene))-alt-(5,5-(1',3'-di-2-thienyl-5,7'-bis(2-ethylhexyl)benzo[1',2'-c:4',5'-c']dithiophene-4,8-dione))] (PBDB-T) and 3,9-bis(2-methylene-((3-(1,1-dicyanomethylene)-6/7-methyl)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2',3'-d']-s-indaceno[1,2-b:5,6-b']dithiophene (IT-M). One set of the BHJ (PBDB-T : IT-M) films was thermally annealed at $160^{\circ}C$ for 30min, while another set was used without any thermal treatment after spin-coating. The quick J-V scan (cycling) measurement disclosed that the PCE decay was relatively slower for the annealed BHJ layers than the unannealed (as-cast) BHJ layers. As a result, after ten cycles, the annealed BHJ layers delivered higher PCE than the unannealed BHJ layers due to higher and more stable trend in fill factor. The present quick J-V cycling method is simple but expected to be useful for the prediction of short-term stability in organic solar cells.

• 분석과학
• /
• 제26권6호
• /
• pp.381-386
• /
• 2013

본 연구는 유해화학물질관리법에 지정되어 있는 사고대비물질 중 휘발성과 화재위험성 등급이 높은 알릴클로라이드(allyl chloride, AC)와 이황화탄소(carbon disulfide, CD)에 대하여 테들라 백에서의 보존 특성을 연구하였다. 테들라 백에서의 시료 보존성을 연구하기 위하여 시료 보존성에 영향을 줄 수 있는 시료보관 온도($2^{\circ}C$, $25^{\circ}C$), 물질 농도(저농도, 고농도), 보관 시간(0시간, 48시간, 96시간, 144시간), 단일물질과 혼합물질 등의 영향인자를 비교하여 연구하였다. 테들라 백 내에서의 시료 보존율은 시간 경과에 따라 감소하였고 각 영향인자에 대한 T-검정결과 농도와 혼합형태에 따라 유의한 차이를 보였다. 본 연구결과는 테들라 백을 사용하여 시료 채취 시 대상물질에 대한 정량적 분석정보를 제공하는데 도움이 될 것으로 판단된다.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2427-2434
• /
• 2022

Series of unequal quantity Nd/Ce co-doped ceramic nuclear waste forms, (Gd, Nd)₂(Zr, Ce)₂O₇, were prepared to tailor its ordered pyrochlore or disordered fluorite structure. The phase transition, microtopography, and elemental composition of the ceramic samples were systematically investigated, especially the effect of order-disorder structure on the chemical stability. It was confirmed that unequal quantity of Nd/Ce could synchronously replace the Gd/Zr-sites of Gd₂Zr₂O₇. And the phase transition of order-disorder structure could be successfully tailored by regulating the average cationic radius ratio of (Gd, Nd)₂(Zr, Ce)₂O₇ series. The elements of Gd, Nd, Zr, and Ce are uniformly distributed in the ordered or disordered structures. The MCC-1 leaching results showed that (Gd, Nd)₂(Zr, Ce)₂O₇ pyrochlore ceramic nuclear waste forms had excellent chemical stability, whose elements' normalized leaching rates were as low as 10^-4-10^-7 g·m^-2·d^-1 after 7 days. In particular, the chemical stability of disordered structure was superior to that of ordered structure. It was proposed that the force constant and the closest packing were changed with the structure transformation resulting the chemical stability difference.

• Nuclear Engineering and Technology
• /
• 제48권3호
• /
• pp.608-612
• /
• 2016

D-(+)-glucose (Glc) was added to the original Fricke polyvinyl alcohol-glutaraldehyde-xylenol orange (FPGX) hydrogel dosimeter system to make a more stable FPGX hydrogel three-dimensional dosimeter in this paper. Polyvinyl alcohol was used as a substrate, which was combined with Fricke solution. Various concentrations of Glc were tested with linear relevant fitting for optimal hydrogel production conditions. The effects of various formulations on the stability and sensitivity of dosimeters were evaluated. The results indicated that D-(+)-Glc, as a free radical scavenger, had a great effect on stabilizing the dose response related to absorbency and reducing the auto-oxidization of ferrous ions. A careful doping with Glc could slow down the color change of the dosimeter before and after radiation without any effect on the sensitivity of the dosimeter.

• 한국안전학회지
• /
• 제24권4호
• /
• pp.40-46
• /
• 2009

The early identification of thermal hazards associated with a process such as the heats of reaction, exothermic decompositions, and the understanding of thermodynamics before any large scale operations are undertaken. The evaluation of reaction factors and thermal behavior on esterification process in manufacture of concrete mixture agents are described in the present paper. The experiments were performed in the differential scanning calorimetry(DSC), C 80 calorimeter, and thermal screening unit($TS^u$). The aim of the study was to evaluate the thermal stability of single material and mixture in esterification process. We provided the thermal data of chemical materials to present safe operating conditions through this study.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3190-3194
• /
• 2010

Mixed electrolytes formed by the combination of 1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl) imide (BMP-TFSI) ionic liquid and standard liquid electrolyte are prepared and characterized. Linear sweep voltammetry measurements demonstrate that these mixed systems exhibit a wide electrochemical stability window, allowing them to be suitable electrolyte for carbonaceous anode-based lithium-ion batteries. Lithium-ion cells composed of graphite anode and $LiCoO_2$ cathode are assembled using the mixed electrolytes, and their cycling performances are evaluated. The cell containing proper content of BMP-TFSI shows good cycling performance comparable to that of a cell assembled with organic electrolyte. The presence of BMP-TFSI in the mixed electrolyte contributes to the reduction of the flammability of electrolyte solution and the improvement of the thermal stability of charged $Li_{1-x}CoO_2$ in the electrolyte solution.

• 한국식품조리과학회지
• /
• 제6권2호
• /
• pp.67-76
• /
• 1990

To observe the propability as the frying oil and oxidative stability of red pepper seed oil, some physico-chemical tests of the oil were examined during 21 days storage period at 5$^{\circ}C$, 15$^{\circ}C$ and 30$^{\circ}C$, and AOM value determined and after heating the oil at 180${\pm}$5$^{\circ}C$ for 40 hours with or without antioxidants. The analysis storage stability of red pepper seed oil showed that the quality of storage group at 5$^{\circ}C$ was almost as good as fresh oil, and the storage group at 30$^{\circ}C$ showed certain degree of rancidity. Change of physico-chemical characteristic during storage were so small so that storage stability of red pepper seed oil was found to be good. AOM stability of red pepper seed oil was 7 hours which is lower than other vegetable oil, but the degree of stability grew greatly after adding phenolic antioxidants, such on TBHQ or PG. As for the chemical change after heating continuously for 40 hours, acid value, peroxide value and refractive index increased, but iodine value decreased as the heating processed. The fatty acid composition also showed the remarkable reduction of linoleic acid. The addition of antioxidants resulted in the delay of oxidation, the degree of which was greater in TBHQ than in PG.

• Korea-Australia Rheology Journal
• /
• 제17권2호
• /
• pp.63-69
• /
• 2005

The stability of low-speed spinning process exhibiting spinline flow-induced crystallization (FIC) with no neck-like spinline deformation has been investigated using the method of linear stability analysis. Effects of various process conditions such as fluid viscoelasticity and the spinline cooling on the spinning stability have been found closely related to the development of the spinline crystallinity. It also has been found that the FIC makes the system less stable or more unstable than no FIC cases when the spinline crystallinity reaches its maximum possible value, whereas the FIC generally stabilizes the system if the crystallinity doesn't reach its maximum value on the spinline. It is believed that the destabilizing effect of the FIC on low-speed spinning when the crystallinity is fully developed on the spinline is due to the reduction of the real spinning length available for deformation on the spinline. On the other hand, the increased spinline tension caused by the FIC when the maximum crystallinity is not reached on the spinline and thus no reduction in the spinning length occurs, makes the sensitivity of spinline variables to external disturbances smaller and hence stabilizes the system. These linear stability results are consistent with the findings by nonlinear transient simulation, as first reported by Lee et al. (2005b).

• Elastomers and Composites
• /
• 제58권3호
• /
• pp.136-141
• /
• 2023

Polyacrylic rubber (ACM) is well known for its excellent heat resistance and chemical stability. Additionally, its performance can be readily manipulated by modifying its functional groups, rendering it highly attractive to various industries. However, extreme climate changes have necessitated an expansion of the operating temperature range and lifespan of ACM products. This requires the optimization of both the compounding process and functional-group design. Hence, we investigated the relationship between the cross-linking system and mechanical properties of an ACM with a carboxylic cure site. The crosslink density is determined by chemical kinetics according to the structure of additives, such as diamine crosslinkers and guanidine accelerators. This interaction enables the manipulation of the scotch time and mechanical properties of the compound. This fundamental study on the correlation analysis between cross-linking systems, physical properties, and storage stability can provide a foundation for material research aimed at satisfying the increasingly demanding service conditions of rubber products.