• Journal of Microbiology and Biotechnology
• /
• v.23 no.2
• /
• pp.205-210
• /
• 2013

Thiol-ene polymerization is a versatile tool for several applications. Here we report the preparation of epoxide groups containing thiol-ene photocurable polymeric support and the covalent immobilization of ${\alpha}$-amylase onto these polymeric materials. The morphology of the polymeric support was characterized by scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) coupled with SEM was used to explore the chemical composition. The polymeric support and the immobilization of the enzyme were characterized by FTIR analysis. SEM-EDS and FTIR results showed that the enzyme was successfully covalently attached to the polymeric support. The immobilization efficiency and enzyme activity of ${\alpha}$-amylase were examined at various pH (5.0-8.0) and temperature ($30-80^{\circ}C$) values. The storage stability and reusability of immobilized ${\alpha}$-amylase were investigated. The immobilization yield was $276{\pm}1.6$ mg per gram of polymeric support. Enzyme assays demonstrated that the immobilized enzyme exhibited better thermostability than the free one. The storage stability and reusability were improved by the immobilization on this enzyme support. Free enzyme lost its activity completely within 15 days. On the other hand, the immobilized enzyme retained 86.7% of its activity after 30 days. These results confirm that ${\alpha}$-amylase was successfully immobilized and gained a more stable character compared with the free one.

• Journal of Applied Biological Chemistry
• /
• v.49 no.1
• /
• pp.28-32
• /
• 2006

Effect of organic-C on immobilization and nitrification patterns in acidic soil was examined during 20 weeks incubation period to verify if organic amendments such as composted material can increase soil retention of N by stimulating microbial immobilization of $NH_4^+$. Four treatments were laid out: control without fertilizer N and glucose (treatment code: S), ammonium sulfate (SN), ammonium sulfate with single glucose at the commencement (0 week) of incubation (SNG), and ammonium sulfate with double glucose at 0 and 4 weeks of incubation (SNGG). Glucose application (SNG) significantly increased microbial immobilization of $NH_4^+$ within 1 week of incubation over SN. Immobilization was followed by remineralization thereafter; however, second-application of glucose (SNGG) restored $NH_4^+$ immobilization. At the same time, nitrification was significantly inhibited by glucose application as indicated by consistently low $NO_3^-$ concentration in SNG and SNGG soils, suggesting that microbial assimilation of $NH_4^+$ is predominant compared to nitrification when available C-source is abundant. These results suggest application of chemical fertilizer-N with organic amendment would have beneficial effect on soil-N retention and environmental conservation by reducing production of $NO_3^-$ which is likely to be lost through leaching or denitrification.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.9
• /
• pp.2741-2746
• /
• 2013

The immobilization of enzyme is one of the key issues both in the field of enzymatic research and industrialization. In this work, we reported a facile method to immobilize Candida Antarctica lipase B (CALB) in alginate carrier. In the presence of calcium cation, the enzyme-alginate suspension could be cross-linked to form beads with porous structure at room temperature, and the enzyme CALB was dispersed in the beads. Activity of the enzyme-alginate composite was verified by enzymatic hydrolysis reaction of p-nitrophenol butyrate in aqueous phase. The effects of reaction parameters such as temperature, pH, embedding and lyophilized time on the reactive behavior were discussed. Reuse cycle experiments for the hydrolysis of p-nitrophenol butyrate demonstrated that activity of the enzyme-alginate composite was maintained without marked deactivation up to 6 repeated cycles.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.2
• /
• pp.199-203
• /
• 2001

A simple quantitative method to measure the degree of silanization was developed, based on the reaction of ninhydrin with the silanization reagent (3-aminopropyltriethoxysilane, 3-APTES). At low concentrations (0.001-0.005%, v/v) of 3-APTES, a good linearity was obtained when 3-APTES reacted with undiluted ninhydrin for 30 min. On the other hand, at high levels of 3-APTES, a linearity was obtained when 3-APTES reacted with 3-fold diluted ninhydrin for 20 min. The reliability of regression curves mentioned above was expressed as a regression coefficient ($R^2$) of more than 0.99. Immobilization of different enzymes was introduced via silanization by using the 3-APTES in order to confirm the validity of the ninhydrin method. When yield for each step in the immobilizatio process were compared, yields of both glutaraldehyde and protein were founc to have the same tendency to silanization. These results shw that the ninhydrin method was suitable for quatitative analysis of silanization and that yields of immobilization could be pre-estimated by measuring silanization levels using the ninhydrin method.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.2 no.2
• /
• pp.77-81
• /
• 1997

Removal of nitrogen compound from waste water is essential and often accomplished by biological process. To prevent washout and to develop an efficient bioreactor, immobilization of sutibal microorganisms could be sensible approach. Strains and permeabilized cell encapsulated in cellulose nitrate microcapsules and immobilized on polystyrene films were prepared by the method described in the previous study. In the wastewater treatment system, nitrification of ammonia component is generally known as rate controlling step. To enhance the rate of nitrification, firstly nitrifying strains Nitrosomonas europaea(IFO14298), are permeabilized chemically, and immobilized on polystyrene films and secondly oxidation rates of strain system and permeabilized strain system are compared in the same condition. with 30 minute permeabilized cells, it took about 25 hours to oxidize 70% of ammonia in the solution, while it took about 40 hours to treat same amount of ammonia with untreated cells. All the immobilization procedures did not harm to the enzyme activity and no mass transfer resistance through the capsule well was shown. In the durability test of immobilized system, the system showed considerable activity for the repeated operation for 90 days. With these results, the system developed in this study showed the possibility to be used in the actual waste water treatment system.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.11
• /
• pp.1803-1808
• /
• 2008

For practical application, the stability of permeabilized Ochrobactrum anthropi SY509 needs to be increased, as its half-life of enzymatic denitrification is only 90 days. As the cells become viable after permeabilization treatment, this can cause decreased activity in a long-term operation and induce breakage of the immobilization matrix. However, the organic solvent concentration causing zero cell viability was 50%, which is too high for industrial application. Thus, whole-cell immobilization using glutaraldehyde was performed, and 0.1% (v/v) glutaraldehyde was determined as the optimum concentration to maintain activity and increase the half-life. It was also found that 0.1% (v/v) glutaraldehyde reacted with 41.9% of the total amine residues on the surface of the cells during the treatment. As a result, the half-life of the permeabilized cells was increased from 90 to 210 days by glutaraldehyde treatment after permeabilization, and no cell viability was detected.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.1
• /
• pp.70-74
• /
• 2003

The heterogeneous bioluminescence immunoassay for digoxin was developed using photoprotein, native aequorin as a label and the site-directed immobilization technique based on avidin/biotin interaction. Aequorin is a bioluminescence protein, originally isolated from the jellyfish Aequoria Victoria and an attractive label in analytical applications because of sensitive detection due to virtually no background bioluminescent signal. Digoxin is a cardioactive drug, and its therapeutic level in serum is at low concentration with very narrow therapeutic index. The aequorin-digoxigenin conjugates were synthesized by the N-hydroxysuccinimide ester method and characterized in terms of bioluminescent residual activity. The resulting dose-response curve shows that the detection limit is $1.0\;{\times}\;10^{-10}\;M$ and a dynamic range is three orders of magnitude, which was obtained by $1.0\;{times}\;10^{-10}\;M$ conjugate and 0.9 μg/mL anti-digoxin antibody. Three structurally similar molecules to digoxin were examined for their cross-reactivity. None of these three compounds showed any crossreactivity with digoxin antibody employed in this study. Standard amounts of digoxin corresponding to the therapeutic range were spiked into the each serum solution. Study of the serum matrix effect indicated that correlation coefficient shows good agreement between luminescence light intensity between in buffer and in serum.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.11
• /
• pp.1667-1670
• /
• 2004

In DNA microarray produced by DNA-deposition technology, DNA-immobilization and -hybridization yields on a solid support are most important factors for its accuracy and sensitivity. We have developed a dendrimeric support using silylated aldehyde slides and polyamidoamine (PAMAM) dendrimers. An oligonucleotide array was prepared through a crosslinking between the dendrimeric support and an oligonucleotide. Both DNAimmobilization and -hybridization yields on the solid support increased by the modification with the dendrimers. The increase of the immobilization and hybridization efficiency seems to result from a threedimensional arrangement of the attached oligonucleotide. Therefore, our dendrimeric support may provide a simple and efficient solution to the preparation of DNA microarrays with high-density DNA-deposition and high hybridization efficiency.

• Macromolecular Research
• /
• v.10 no.5
• /
• pp.291-295
• /
• 2002

Atomic force microscopy(AFM) was used to study the polyethylene(PE) surfaces grafted and immobilized with acrylic acid by Ar plasma treatment. The topographical images and parameters including RMS roughness and Rp-v value provided an appropriate means to characterize the surfaces. The plasma grafting and immobilization method were a useful tool for the preparation of surfaces with carboxyl group. However, the plasma immobilization method turned out to have a limitation to use as a means of preparation of PE surface with specific functionalities, due to ablation effect during the Ar plasma treatment process.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.12
• /
• pp.3668-3674
• /
• 2010

Mesoporous SBA-15 was synthesized using tetraethylorthosilicate (TEOS) as the silica source and Pluronic (P123) as the structure-directing agent. The defective Si-OH groups present in SBA-15 were successively grafted with 3-chloropropyltrimethoxysilane (CPTMS) followed by tris-(2-aminoethyl) amine (TAEA) and/or tetraethylenepentamine (TEPA) for effective immobilization of silver nanoparticles. Grafting of TAEA and/or TEPA amine and immobilization of silver nanoparticles inside the channels of SBA-15 was verified by XRD, TEM, IR and BET techniques. The silver nanoparticles immobilized on TAEA and /or TEPA grafted SBA-15 was subjected for electrocatalytic reduction of hydrogen peroxide ($H_2O_2$). The TEPA stabilized silver nanoparticles show higher efficiency for reduction of $H_2O_2$ than that of TAEA, due to higher number of secondary amine groups present in TEPA. The amperometric analysis indicated that both the Ag/SBA-15/TAEA and Ag/SBA-15/TEPA modified electrodes required lower over-potential and hence possess high sensitivity towards the detection of $H_2O_2$. The reduction peak currents were linearly related to hydrogen peroxide concentration in the range between $3{\times}10^{-4}\;M$ and $2.5{\times}10^{-3}\;M$ with correlation coefficient of 0.997 and detection limit was $3{\times}10^{-4}\;M$.