• Korean Chemical Engineering Research
• /
• 제44권5호
• /
• pp.483-488
• /
• 2006

유기고분자에 대한 건식 식각공정으로 remote 플라즈마를 이용하여 유리 표면에 도포된 PMMA의 식각공정에 관한 연구로 플라즈마 출력, 반응가스, 플라즈마 발생원과의 거리에 대한 식각특성을 측정하였다. 플라즈마 발생원으로부터 멀어질수록 플라즈마에 의해 발생된 라디칼 밀도로 인해 PMMA 식각속도가 감소하였다. 플라즈마 내에서 발생된 라디칼에 의해 PMMA가 제거되며, 플라즈마 출력이 증가할수록 PMMA 표면과 반응하는 라디칼 증가로 식각속도는 선형적으로 증가하였다. 식각 기체에서 산소의 양이 증가함에 따라 식각속도 증가와 더불어 식각표면의 거칠기도 증가함을 알 수 있었다.

• 한국표면공학회지
• /
• 제49권3호
• /
• pp.231-237
• /
• 2016

This article reports a new chemical bath for preparing a mirror-like surface of AZ31 Mg alloy. In order to find an appropriate chemical polishing solution, four different acidic solutions of sulphuric acid, nitric acid, acetic acid and a specially designed mixture of nitric acid and acetic acid were investigated in view of the changes in surface appearance, roughness and dissolution rate of AZ31 Mg alloy. The surface scales on AZ31 Mg alloy were readily removed by all the acidic solutions, but a reflective surface was produced only by etching in the specially designed solution, and only after a specific etching time. The surface roughness increased with etching time in sulphuric acid, nitric acid, and acetic acid, but it lowered after a specific etching time in the specially designed mixture of nitric acid and acetic acid. Dissolution rate of the alloy in the specially designed mixture of nitric acid and acetic acid appeared to be more than twice than that in separate nitric acid or acetic acid. In this work, we recommend the mirror-like surface of AZ31 Mg alloy obtained by polishing for an optimum time in a mixture of nitric acid and acetic acid for following surface finishings, chemical conversion coating, electroplating, electrophoretic painting and anodizing treatment.

• 전기화학회지
• /
• 제14권4호
• /
• pp.191-195
• /
• 2011

Wet chemical etching methods were utilized to conduct Si surface texturing, which could enhance photoelectrochemical hydrogen generation rate. Two different etching methods tested, which were anisotropic metal-catalyzed electroless etching and isotropic etching. The Si nano-texture that was fabricated by the anisotropic etching showed ~25% increase in photocurrent for H2 generation. The photocurrent enhancement was attributed to the reduced reflection loss at the nano-textured Si surface, which provided a layer of intermediate density between water and the Si substrate.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.390-390
• /
• 2012

Information technology industries has grown rapidly and demanded alternative memories for the next generation. The most popular random access memory, dynamic random-access memory (DRAM), has many advantages as a memory, but it could not meet the demands from the current of developed industries. One of highlighted alternative memories is magnetic random-access memory (MRAM). It has many advantages like low power consumption, huge storage, high operating speed, and non-volatile properties. MRAM consists of magnetic-tunnel-junction (MTJ) stack which is a key part of it and has various magnetic thin films like CoFeB, FePt, IrMn, and so on. Each magnetic thin film is difficult to be etched without any damages and react with chemical species in plasma. For improving the etching process, a high density plasma etching process was employed. Moreover, the previous etching gases were highly corrosive and dangerous. Therefore, the safety etching gases are needed to be developed. In this research, the etch characteristics of CoFeB magnetic thin films were studied by using an inductively coupled plasma reactive ion etching in $CH_4/O_2/Ar$ gas mixes. TiN thin films were used as a hardmask on CoFeB thin films. The concentrations of $O_2$ in $CH_4/O_2/Ar$ gas mix were varied, and then, the rf coil power, gas pressure, and dc-bias voltage. The etch rates and the selectivity were obtained by a surface profiler and the etch profiles were observed by a field emission scanning electron microscopy. X-ray photoelectron spectroscopy was employed to reveal the etch mechanism.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.330.2-330.2
• /
• 2014

III-V족 화합물반도체는 트랜지스터와 광다이오드, 레이저 등의 광전소자 제작물질로 오랫동안 사용 되어 왔다. III-V 화합물 반도체로 제작된 광전소자의 특성을 향상시키기 위해선 다양한 형태의 표면구조가 필요하며, distributed feedback 레이저나 distributed Bragg reflector 레이저의 경우 높은 aspect-ratio를 가지는 구조를 필요로 한다. 현재까지 높은 aspect-ratio를 가지는 III-V족 화합물반도체 구조제작을 위해 reactive ion etching (RIE) 방식을 사용 하였는데, 이 방법은 ion collision에 의한 표면손상과 더불어 에칭 잔여물이 남아 반도체 표면을 오염시키는 문제점을 가지고 있다. 이를 개선하기 위하여 MaCE (Metal-Assited chemical etching)법이 최근 제안되었는데, 본 연구에서는 MaCE 방법을 통하여 다양한 형태의 GaAs 표면구조를 제작하였다. 본 실험을 통하여 에칭용액 조건에 따라 GaAs의 구조적 특성과 morphology가 달라지는 것을 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1408-1411
• /
• 2009

This paper describes organic acid-based wet chemical etching behaviors of amorphous Ga-doped zinc oxide (GZO) thin film sputter-deposited at low temperature (room temperature). Wet etch parameters such as etching time, temperature, and etchant concentration are investigated for formic and citric acid etchants, and their effects on the etch rate, etch residue and the feature of edge line are compared.

• 한국표면공학회지
• /
• 제26권5호
• /
• pp.225-234
• /
• 1993

Titanium nitride coatings were deposited onto SUS304 stainless steel substrates pretreated by mechanical scrubbing, chemical etching at 50% HCl solution and Ar ion etching. Adhesion strength were measured by scratch tester and confirmed by SEM with EDS. Adhesion strength of Ar ion etched substrate was 10 to 15 times higher than that of mechanical scrubbed or chemical etched substrate. Ar ion etching brought about an uniform and fine spherical shaped surface, while chemical etching gave rise to a rough and irregular surface on SEM micrograph. It was suggested that higher adhesion strength might be caused by anchoring effect of Ar ion etched surface prior to TiN deposition.

• 공업화학
• /
• 제25권1호
• /
• pp.53-57
• /
• 2014

본 연구에서는 micro-contact printing을 통하여 니오븀 호일 표면 위에 균일한 에칭 pits를 형성하였다. 균일한 보호층을 형성하고자 전해연마의 효과를 확인하였으며, 기존의 $O_2$ 플라즈마 공정 없이 손쉽게 균일한 에칭 pits를 형성시킬 수 있는 조건을 확인하였다. 메탄올 혼합 전해질을 사용하여 10 min 동안 에칭을 진행한 결과 니오븀 호일 표면 위에 지름과 간격이 각각 $10{\mu}m$와 $5{\mu}m$로 잘 정렬된 에칭 pits를 관찰하였다.

• 한국재료학회지
• /
• 제31권3호
• /
• pp.162-171
• /
• 2021

Dry etching of copper thin films is performed using high density plasma of ethylenediamine (EDA)/hexafluoroisopropanol (HFIP)/Ar gas mixture. The etch rates, etch selectivities and etch profiles of the copper thin films are improved by adding HFIP to EDA/Ar gas. As the EDA/HFIP concentration in EDA/HFIP/Ar increases, the etch rate of copper thin films decreases, whereas the etch profile is improved. In the EDA/HFIP/Ar gas mixture, the optimal ratio of EDA to HFIP is investigated. In addition, the etch parameters including ICP source power, dc-bias voltage, process pressure are varied to examine the etch characteristics. Optical emission spectroscopy results show that among all species, [CH], [CN] and [H] are the main species in the EDA/HFIP/Ar plasma. The X-ray photoelectron spectroscopy results indicate the formation of CuCN compound and C-N-H-containing polymers during the etching process, leading to a good etch profile. Finally, anisotropic etch profiles of the copper thin films patterned with 150 nm scale are obtained in EDA/HFIP/Ar gas mixture.

• 한국표면공학회지
• /
• 제28권2호
• /
• pp.101-109
• /
• 1995

Electroetching rates of $FeCl_3$ solution were increased according to increasing solution temperature. Activation energy of electroetching at Be'36 and 5A/$dm^2$ condition was 28.3Kcal and also, at Be'46 and 5A/dm$^2$ condition was 33.2Kcal. At Be'36 concentration of $FeCl_3$ solution, electroetching rate were more higher than at Be'46 concentration. Surfaces of etched grooves obtained at 8A/$dm^2$ or higher current density in 46 Be' concentration of $FeCl_3$ solution were observed to be flat and smooth owing to suppressing chemical etching reaction. Distinctly etched boundaries became to be appeared at 2A/$dm^2$ in Be'41 electroetching condition by differential effects. In case of applying 8A/$dm^2$ current density to Be'46 of $FeCl_3$ solution, etching depth were 4 times and side etching were 6 times more than chemical etching case respectively.