• Journal of Veterinary Clinics
• /
• 제29권6호
• /
• pp.488-493
• /
• 2012

Two Maltese (2-year-old, intact female and 4-month-old, intact female) and a Pekingese (10-year-old, intact male) dogs were referred due to vomiting, anorexia, head-pressing and hypersalivation. Physical examinations, complete blood count, serum chemical analysis, radiography, ultrasonography and computed tomography (CT) were evaluated. Laboratory findings in these dogs included high hepatic enzyme, serum bile acid and ammonia concentration. Microhepatia was found on abdominal radiographs in two dogs. The existence of portosystemic shunt was presented in abdominal ultrasonography. The shunt vessel was identified in all dogs by CT imaging. Based on three-dimensional CT reconstruction, the origin and termination of each shunt vessel were defined certainly. In consequence, each dog was diagnosed single extrahepatic portosystemic shunt. After diagnosis, surgical treatment was performed in all dogs. This case report describes clinical finding, imaging characteristics, and three-dimensional CT imaging of single extrahepatic portosystemic shunt cases.

• Journal of Korea Water Resources Association
• /
• 제36권6호
• /
• pp.1013-1023
• /
• 2003

This study was performed to improve water quality of stream by applying hydraulic structures (weir and river bed material) made of porous concrete. The physical and chemical characteristics of porous concrete were measured to estimate application possibility of it in hydraulic structures and it was considered as a proper material for the hydraulic structures. In the results of comparison for the component of matters attached on the hydraulic structures made of porous and ordinary concrete, DW (dry weight) amount attached on porous concrete was 1.6 times higher than that on ordinary concrete under the condition of the same flow rate but influence by flow rate (difference of 10 times) was not shown. Therefore, we could understand that the material of media was more important in DW amount than flow rate. The rate of AFDM (ash free dry mass) to DW also was more at porous concrete than at ordinary concrete. Especially, the high rates of nitrogen and phosphorous in matters attached on porous concrete verify that they were removed by assimilation, adsorption and metabolism of periphyton. The removal percentage of SS, BOD, COD, T-N and T-P by hydraulic structures applying porous concrete compared with ordinary concrete was increased by 34.6%, 36.9%, 33.9%, 18.3% and 21.6%, respectively. Therefore, applying porous concrete to hydraulic structure is expected to contribute to improvement of stream water quality.

• Resources Recycling
• /
• 제21권4호
• /
• pp.44-52
• /
• 2012

The purpose of this study is to confirm the possibility of obtaining high grade coal from fixed carbon 20.68% coal. Also, the mineralogical, physical/chemical and liberation characteristics was found with the aim of decrease in ash amount, during the pre-processing of clean coal technology. In this study, batch flotation and microbubble column flotation that was appropriate for the processing of fine particles was used with the variation in kinds and quantity of frother, collector and depressant. Also grinding time, air flow rate and feeding rates were examined. As a result of batch flotation, using pulp density 20%, collector DMU-101+dodecyl amine(100 mL/ton), frother pine oil (200 mL/ton), depressant sodium silicate(1 kg/ton), obtained the result of ash rejection 81.55% and combustible recovery 70.23%. In result of microbubble column flotation, the result was ash rejection 83.85% and combustible recovery 70.42% under the condition of pulp density 5%, grinding time 5 min. collector DMU-101+DDA(100 mL/ton), frother AF65(5.4 L/ton), depressant SMP(3.5 kg/ton), wash water(360 mL/min.) and air flow rate(1,197 mL/min.).

• Fire Science and Engineering
• /
• 제22권2호
• /
• pp.63-69
• /
• 2008

The characteristics of the spread of a forest fire are generally related to the attributes of combustibles, geographical features, and meteorological conditions, such as wind conditions. The most common methodology used to create a prediction model for the spread of forest fires, based on the numerical analysis of the development stages of a forest fire, is an analysis of heat energy transmission by the stage of heat transmission. When a forest fire breaks out, the analysis of the transmission velocity of heat energy is quantifiable by the spread velocity of flame movement through a physical and chemical analysis at every stage of the fire development from flame production and heat transmission to its termination. In this study, the formula used for the 1-D surface forest fire behavior prediction model, derived from a numerical analysis of the surface flame spread rate of solid combustibles, is introduced. The formula for the 1-D surface forest fire behavior prediction model is the estimated equation of the flame spread velocity, depending on the condition of wind velocity on the ground. Experimental and theoretical equations on flame duration, flame height, flame temperature, ignition temperature of surface fuels, etc., has been applied to the device of this formula. As a result of a comparison between the ROS(rate of spread) from this formula and ROSs from various equations of other models or experimental values, a trend suggesting an increasing curved line of the exponent function under 3m/s or less wind velocity condition was identified. As a result of a comparison between experimental values and numerically analyzed values for fallen pine tree leaves, the flame spread velocity reveals a prediction of an approximately 10% upward tendency under wind velocity conditions of 1 to 2m/s, and of an approximately 20% downward tendency under those of 3m/s.

• Korean Journal of Weed Science
• /
• 제13권2호
• /
• pp.81-88
• /
• 1993

For searching the photosynthetic electron transport(PET) inhibitors, bio-rational screening system using thylakoid membranes extracted from wild and mutant cyanobacteria(Anacystis nidulans $R_2$) was developed. Generally, thylakoid membrane was more sensitive to the tested herbicides than the chloroplast from spinach in the Hill reaction. Higher resistant characteristics appeared in mutant D-5, Di-22 to diuron and mutant G-264 to atrazine as compared to wild type. To test the reaction of thylakoid membrane to herbicides, diuron and atrazine were applied simultaneously. Diuron and atrazine competed each other for binding with substituted amino acids, while diuron and dinoseb were non-competitive, and inhibiting activity was increased. Conclusively, bio-rational screening system using cyanobacteria was proved to be fast and efficient screening method for the development of PET inhibitors.

• Clean Technology
• /
• 제26권2호
• /
• pp.122-130
• /
• 2020

The isotherm, kinetic, and thermodynamic parameters of reactive blue 4 adsorbed by activated carbon were investigated for activated carbon dose, pH, initial concentration, contact time, and temperature data. The adsorption of the RB 4 dye by activated carbon showed a concave shape in which the percentage of adsorption increased in both directions starting from pH 7. The isothermal adsorption data were applied to Langmuir, Freundlich, and Temkin isotherms. Both Freundlich and Langmuir isothermal adsorption models fit well. From determined Freundlich separation factor (1/n = 0.125 ~ 0.232) and Langmuir separation factor (R_L = 1.53 ~ 1.59), adsorption of RB 4 by activated carbon could be employed as an effective treatment method. The constant related to the adsorption heat (B_T = 2.147 ~ 2.562 J mol^-1) of Temkin showed that this process was physical adsorption. From kinetic experiments, the adsorption process followed the pseudo second order model with good agreement. The results of the intraparticle diffusion model showed that the inclination of the first straight line representing the surface diffusion was smaller than that of the second straight line representing the intraparticle pore diffusion. Therefore, it was confirmed that intraparticle pore diffusion is the rate-controlling step. The negative Gibbs free energy change (ΔG = -3.262 ~ -7.581 kJ mol^-1) and the positive enthalpy change (ΔH = 61.08 kJ mol^-1) indicated the spontaneous and endothermic nature of the adsorption process, proving this process to be spontaneous and endothermic.

• Applied Biological Chemistry
• /
• 제35권2호
• /
• pp.110-114
• /
• 1992

The lipid compositions, physical and chemical characteristics of crude oil in Korean safflow, Carthamus tinctorius L., seeds were determined and proxmate composition of it were also analyzed. The proximate composition showed moisture 7.2%, carbohydrate 34.4%, crude protein 18.2%, crude fat 34.8% and ash 5.35. Specific gravity, refractive index, smoking point, melting point and titer of the crude oil were $0.922{\sim}0.927,\;1.468{\sim}1.469,\;210^{\circ}C,\;-15{\sim}-18^{\circ}C\;and\;15{\sim}18$, respectively. Iodine value, saponification value, acid value, esterification value, unsapoifiable matter and saturated fatty acid content of the crude oil were $140{\sim}152,\;186{\sim}192,\;2.6{\sim}3.5,\;179{\sim}186,\;0.8{\sim}1.3%\;and\;6.6{\sim}7.2%$, respectively. Fatty acid compositions were quantitatively determined by G.L.C. to give $70{\sim}78%$ linoleic acid, $10{\sim}23%$ oleic acid and $5{\sim}8%$ palmitic acid as main components, stearic, linolenic and myristic acid were presented in small quantities.

• Korean Journal of Construction Engineering and Management
• /
• 제15권3호
• /
• pp.47-57
• /
• 2014

LNG plant projects tend to be implemented in overseas owing to its characteristics, so their project management scheme is somewhat different from those of general projects. Value chain in a LNG plant project includes exploration/production of gases, physical liquefaction/chemical conversion processes, transportation and storage. Key factors in the chain include liquefaction process (including ultra-low temperature liquefaction) to convert natural gas into liquid materials or fuel, and Front End Engineering Design (FEED) package, as well as Engineering, Procurement and Construction (EPC) technology comprising control, operation and construction. Success of a complex LNG plant project implemented in overseas depends on decision-making process in project management. Accordingly, to develop a decision-making model in of plant construction, the study extracted none factors in project management by EPC stage and assessed importance of each factor. The result showed that items in both project management and project risk management are important. Especially, the study developed a decision-making model in the construction stage of a LNG plant project based on the project management factors and importance assessment. The developed decision-making model would lay groundwork in building a decision-making system in construction stage of project management.

• Resources Recycling
• /
• 제22권6호
• /
• pp.64-72
• /
• 2013

The purpose of this study is to confirm the possibility of obtaining high grade coal from 57.39% of fixed carbon fine coal. Also, the mineralogical, physical/chemical and liberation characteristics are to be identified to decrease in ash amount, during the pre-processing of clean coal technology. In this study, batch flotation and CPT column flotation proper for the processing of fine particles were used with the variation in kinds and quantity of frother, collector and depressant. Also air flow rate and feeding rates were examined. As a result of batch flotation using 20% of pulp density DMU 101 collector(100 mL/ton), AF65 frother(300 mL/ton), sodium metaphosphate depressant (1 kg/ton), 67.57% of ash rejection and 70.90% of combustible recovery were obtained. The result of CPT column flotation was 85.59% of ash rejection and 88.97% of combustible recovery under the conditions of 5% of pulp density, DMU-101 collector (100 mL/ton), AF65 frother(10 L/ton), SMP depressant(1 kg/ton), wash water(100 mL/min.) and air flow rate(1,200 mL/min.).

• Korean Journal of Heritage: History & Science
• /
• 제46권4호
• /
• pp.78-89
• /
• 2013

For safe conservation treatment of damaged accessory relics that were unearthed, the quality of the material should be accurately identified through a nondestructive analysis and failure analysis. This study provides the basic conservational scientific data regarding material analyses and conservation treatment that were conducted for 11 relics, including amber and agate that were discovered during the repair of Geumsansa Temple's Hall of Maitreya Buddha and Left Attendant Buddhas in June 2008. An ultraviolet analysis, SEM-EDS analysis and FT-IR microscope analysis revealed that the physical and chemical characteristics of the 11 relics are the same as those of amber. It is inferred that the cracks and exfoliation of the surface of most amber relics is attributable to darkening of the color due to C=C bond oxidation. It is also assumed that cracks and exfoliation occurred from the weathered layer on the amber surface. As such, it is appropriate to engage in conservation treatment of the damaged amber relics by using $Paraloid^{(R)}$ B67 reinforcing agent that is diluted in nonpolar solvent. The greatest care is needed for future handling of organic artifacts.