• 한국유체기계학회 논문집
• /
• 제2권2호
• /
• pp.19-26
• /
• 1999

Thermal output in a nuclear power plant is verified with calorimetric heat balance on the secondary plant. The calorimetry involves the precise measurement of the feedwater flow rate. However, the correct indication of feedwater flow rate obtained by a pressure-difference measurement across a venturi can be affected by instrument errors, fouling or a poorly developed velocity profile. This can result in an inaccurate mass flow rate and consequently an inaccurate estimate of power. The purpose of this study is to develop verification methods with accuracy better than $0.5\%$ for high precision flow measurement to be used for measuring feedwater flow rate. This chemical tracer method is a testing process that uses tracers which can be applied to quantify losses in electrical output due to the incorrect measurements of feedwater flow rate. And this system has good response to the variation of the flow rate. Accuracy of better than 0.5 percent can be expected for feedwater flow measurement, providing that the system can be stabilized during the test. This methodology is applicable to other flow systems well.

• 한국대기환경학회지
• /
• 제31권2호
• /
• pp.105-117
• /
• 2015

Sources related to road dust is one of the biggest sources, which is responsible for a large portion of emission. In particular, PM2.5 is a potential cause for respiratory diseases, thus it should be managed and a mitigation plan using results of statistical apportionment modeling such as chemical mass balance needs to be established. Recently, identifying sources of PM2.5 and analyzing the contribution of the road dust through a contribution assessment is required. Therefore, this study provides the chemical source profiles of PM2.5 using IC, GC/MS, OCEC, and XRF for both paved sidewalk and paved roadway collected at seven different sampling sites. As a result, for paved sidewalk, $NH{_4}^+$ (70%), $NO{_3}^-$ (12%), $PO{_4}^-$ (9%), and $SO{_4}^{2-}$ (9%) have been analyzed in PM2.5 mass. Major molecular marker such as Si has been indicated as $12.0{\pm}3.4%$ and $13.6{\pm}6.9%$ for paved sidewalk and roadway, respectively. PAHs such as Fluoranthene, Pyrene, Chrysene, and 1,3,5-Triphenylbenzene are suggested as molecular markers for road dust.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1999년도 춘계 학술발표회 논문집
• /
• pp.185-191
• /
• 1999

An air-conditioning system based on the chemical heat storage principle was considered. $H_2O$ was chosen as the reaction gas and the working fluid as well. Na$_2$S, CaCl$_2$, MnCl$_2$, BaCl$_2$, MgCl$_2$, Fe$_2$(SO$_4$)$_3$ and MnSO$_4$ were tested as the solid reactants by using Cahn pressure balance. Na$_2$S was superior to other salts in respect of high capability of absorption of water gas, 5 moles of $H_2O$ per unit mole of Na$_2$S, and adequate temperature of adsorption, $65^{\circ}C$ at 7torr, and of desorption, 13$0^{\circ}C$ at 76torr. Clausius-Clapeyron diagram of Na$_2$S was obtained via adsorption experiments at several vapor pressures of water gas. To enhance heat and mass transfer characteristics, usually below 1W/m K, of the reactor bed of general adsorption systems, expanded graphite block was adapted as the support of Na$_2$S salt. Expanded graphite blocks had thermal conductivity values of 20~80W/mK with respect to 100~400kg/㎥ of block bulk density. Permeability values of expanded graphite blocks were 10$^{-13}$ ~ 10$^{-14}$ $m^2$ with respect to 100~300kg/㎥ of block bulk density showing highly decreasing values of permeability, below 10$^{-l4}$$m^2$, in the range of above 150kg/㎥ of block bulk density.y.

• Korean Chemical Engineering Research
• /
• 제54권1호
• /
• pp.1-5
• /
• 2016

목질계 바이오매스를 이용하여 효소를 사용하지 않고 발효당을 얻기 위해 황산을 이용한 당화를 수행하였다. 바이오매스로는 pinus rigida와 palm농업 부산물인 EFB를 사용하였다. 산을 이용한 당화에서는 당의 과분해 생성물을 줄이기 위한 당화조건을 생각해 보아야 한다. 따라서 본 연구에서는 목질계 바이오매스를 이용한 2단 산당화를 수행하였다. 산을 이용한 1차 가수분해에서는 72 wt%의 황산을 이용하여 $80^{\circ}C$에서 반응시켰을 경우 가장 높은 당화율을 보였고 pinus rigida와 EFB 각각 11.49 wt%, 32 wt%의 당화율을 보였다. 이후 1차 가수분해에서 얻은 액상을 9~15 wt%의 산농도가 되도록 묽혀 $50{\sim}120^{\circ}C$의 온도로 2차 가수분해를 진행했다. 2차 가수분해시 9%의 황산농도와 $120^{\circ}C$의 온도조건에서 80분간 반응시켰을 때 최종 글루코오스 당화율은 pinus rigida의 경우 86.8 wt.% (39 g/L), EFB의 경우 95.3 wt%(32.4 g/L)를 얻을 수 있었다. 각 단계에서 분석된 결과는 물질수지를 통해 확인하고 당화 효율을 비교해 보았다.

• Journal of Ginseng Research
• /
• 제37권1호
• /
• pp.124-134
• /
• 2013

The authentication of the physico-chemical properties of ginsenosides reference materials as well as qualitative and quantitative batch analytical data based on validated analytical procedures is a prerequisite for certifying good manufacturing practice (GMP). Ginsenoside Rb1 and Rg1, representing protopanaxadiol and protopanaxatriol ginsenosides, respectively, are accepted as marker substances in quality control standards worldwide. However, the current analytical methods for these two compounds recommended by Korean, Chinese, European, and Japanese pharmacopoeia do not apply to red ginseng preparations, particularly the extract, because of the relatively low content of the two agents in red ginseng compared to white ginseng. In manufacturing fresh ginseng into red ginseng products, ginseng roots are exposed to a high temperature for many hours, and the naturally occurring ginsenoside Rb1 and Rg1 are converted to artifact ginsenosides such as Rg3, Rg5, Rh1, and Rh2 during the heating process. The analysis of ginsenosides in commercially available ginseng products in Korea led us to propose the inclusion of the (20S)- and (20R)-ginsenoside Rg3, including ginsenoside Rb1 and Rg1, as additional reference materials for ginseng preparations. (20S)- and (20R)-ginsenoside Rg3 were isolated by Diaion HP-20 adsorption chromatography, silica gel flash chromatography, recrystallization, and preparative HPLC. HPLC fractions corresponding to those two ginsenosides were recrystallized in appropriate solvents for the analysis of physico-chemical properties. Documentation of those isolated ginsenosides was achieved according to the method proposed by Gaedcke and Steinhoff. The ginsenosides were subjected to analyses of their general characteristics, identification, purity, content quantification, and mass balance tests. The isolated ginsenosides showed 100% purity when determined by the three HPLC systems. Also, the water content was found to be 0.534% for (20S)-Rg3 and 0.920% for (20R)-Rg3, meaning that the net mass balances for (20S)-Rg3 and (20R)-Rg3 were 99.466% and 99.080%, respectively. From these results, we could assess and propose a full spectrum of physico-chemical properties of (20S)- and (20R)-ginsenoside Rg3 as standard reference materials for GMP-based quality control.

• 한국대기환경학회지
• /
• 제26권3호
• /
• pp.318-329
• /
• 2010

The purpose of this study was to develop the $PM_{2.5}$ source profiles for diesel and gasoline-powered vehicles, which contained mass abundances in terms of mass fraction of $PM_{2.5}$ of chemical species. Seven diesel-powered vehicles and nine gasoline-powered vehicles were sampled from a chassis dynamometer exhaust dilution system. The species measured were water-soluble ions, elements, elemental carbon (EC), and organic carbon (OC). From this study, the large abundances of EC (54.5%), OC (26.0%), ${SO_4}^{2-}$ (1.5%), ${NO_3}^-$ (0.8%), and S (0.6%) were observed from the diesel-powered vehicle exhaust showing that carbons were dominant species. The gasoline-powered vehicle exhaust emitted large abundances of OC (38.3%), EC (4.2%), ${SO_4}^{2-}$ (3.6%), ${NH_4}^+$ (3.5%), and ${NO_3}^-$ (3.0%). The abundances of ${SO_4}^{2-}$, ${NH_4}^+$, and ${NO_3}^-$ from gasoline vehicle were greater than those of diesel vehicle. The emissions of P, S, Ca, Fe, and Zn among trace elements for the gasoline vehicle were greater than 1% of the $PM_{2.5}$ mass unlike those for the diesel vehicle. Particularly, the fraction of Zn was five times higher from the gasoline vehicle than that from the diesel vehicle. The source profiles developed in this work were intensively examined by applying chemical mass balance model.

• 대한환경공학회지
• /
• 제30권3호
• /
• pp.302-313
• /
• 2008

본 연구는 포항지역 대기 중 PM$_{2.5}$의 물리 화학적 성분들의 농도분포특성을 파악하여 PM$_{2.5}$에 대한 배출원 기여도를 정량적으로 추정하고 PM$_{2.5}$농도 변동에 영향을 미치는 배출원을 알아보고자 하였다. 시료채취지점은 포항지역 내의 대조적인 두 지점인 공업지역과 주거지역에서 각 1개 지점을 선정하였다. 시료채취는 2003년 3월부터 12월에 걸쳐서 계절별 10$\sim$15일 동안 고용량공기시료채취기를 이용하여 24시간 연속 채취였다. PM$_{2.5}$ 시료에 함유된 화학성분들은 산추출하여 ICP와 이온크로마토그래피로 분석하였다. PM$_{2.5}$의 전체평균은 공업지역이 36.6 $\mu$g/m$^3$, 주거지역에서 30.6 $\mu$g/m$^3$로 나타났다. 계절별로는 두 지점 모두 봄철에 가장 높은 농도를 보이고 있으며 다음으로 겨울철, 가을철, 여름철의 순으로 나타났다. 두 측정지점에서 PM$_{2.5}$ 중 가장 많이 함유된 화학성분들은 이차생성입자를 형성하는 성분인 NO$_3^-$, SO$_4^{2-}$으로 나타났으며 각각의 농도는 공업지역에서 4.2 및 8.6 $\mu$g/m$^3$, 주거지역에서 3.7 및 6.9 $\mu$g/m$^3$로 나타났다. 반면, 공업지역에서는 Fe, Mn, Cr 등의 금속성분 농도가 주거지역에 비해 상당히 높게 나타나 공업지역이 철강산업의 영향을 반영하고 있는 것으로 추측된다. 포항지역 대기 중 PM$_{2.5}$의 농도 변동에 미치는 주요 영향인자를 파악하기 위하여 주성분 분석 및 다중회귀분석을 실시한 결과, 공업지역과 주거지역에서 가장 중요한 변수는 도로 비산먼지와 이차생성입자인 것으로 나타났으며, 이들 변수의 변동이 전체 PM$_{2.5}$ 농도변동에 가장 큰 영향을 미친다는 것을 알 수 있었다. 또한 포항지역 PM$_{2.5}$에 대한 주요 발생원의 기여도를 평가하기 위하여 CMB 모델링을 수행한 결과 공업지역의 경우 기여도가 큰 발생원은 토사 및 도로상의 비산먼지로 나타났고 그 다음으로 이차생성입자, 자동차, 해염입자, 금속산업의 순을 보였으며 주거지역도 이와 유사한 양상을 보였다. 이와 같은 결과를 토대로 국내에서 측정된 먼지시료를 대상으로 CMB 모델링 수행 시 그 적용한계성과 문제점 등을 고찰하였다.

• Korean Chemical Engineering Research
• /
• 제55권1호
• /
• pp.86-92
• /
• 2017

석탄 화력발전 연소 배가스에 포함된 이산화탄소를 염수의 전기분해를 통해 얻어진 가성소다와 반응시켜 중탄산나트륨, 염소, 수소 등을 생산하는 공정에 대하여 실험과 전산모사를 병행하였다. Bench 규모 공정을 디자인하여 가성소다에 의한 이산화탄소 전환 공정에 대하여 실험하였고 같은 공정을 공정 모델링을 통해 전산모사 하였다. 실험결과와 전산모사 결과의 비교를 통해 모델의 신뢰성을 확인하였고, 상용급 공정에 대한 모델링을 수행하였다. 상용급 공정에 대한 열 및 물질수지를 계산하였고 반응기내 온도분포와 $CO_2$ 흡수율을 도출하였다. 본 연구를 통해 온실가스 저감뿐만 아니라 $CO_2$ 전환을 통한 경제성까지 갖춘 본 공정에 대한 기술 신뢰성을 확보할 수 있을 것이다.

• 한국수소및신에너지학회논문집
• /
• 제33권4호
• /
• pp.419-429
• /
• 2022

Effects of operating variables on temperature profile and performance of 3 MWth chemical looping combustion system were estimated by mass and energy balance analysis based on configuration and dimension of the system determined by design tool. Air reactor gas velocity, fuel reactor gas velocity, solid circulation rate, and solid input percentage to fluidized bed heat exchanger were considered as representative operating variables. Overall heat output and oxygen concentration in the exhaust gas from the air reactor increased but temperature difference decreased as air reactor gas velocity increased. Overall heat output, required solid circulation rate, and temperature difference increased as fuel reactor gas velocity increased. However, overall heat output and temperature difference decreased as solid circulation rate increased. Temperature difference decreased as solid circulation rate through the fluidized bed heat exchanger increased. Effect of each variables on temperature profile and performance can be determined and these results will be helpful to determine operating range of each variable.

• 상하수도학회지
• /
• 제18권4호
• /
• pp.486-492
• /
• 2004

CMP (Chemical mechanical polishing) is inevitable process to overcome $0.2{\mu}m$ wire thickness in semiconductor industry. In this study, effect of pressure to separate used CMP slurry into solid and liquid for recycle and reuse by ultrafiltration was investigated. Also, water quality after the ultrafiltration such as turbidity and TDS was evaluated. The material of membrane used in the study was PVDF. The used CMP contained 0.5% of solid content and then concentrated up to 18% by weight. The used CMP can not be concentrated higher than 18% because of viscosity and abrasion of pump. The tested feed pressures were 22.1, 29.4 and 36.8 psi. The results have shown that operating at 36.8 psi has advantages on operation time and total flux. The specific flux showed some variation at 1 to 15 of concentration factor but no difference after 15 of concentration factor. Mass balance of solid at initial stage of the operation showed some unbalance because of deposition of solid on the membrane, which was main reason to reduce flux. Turbidity was very stable at lower than 0.2NTU for 22.1 and 36.8 psi of feed pressure.