• Journal of the Korean Society of Food Science and Nutrition
• /
• 제44권6호
• /
• pp.809-815
• /
• 2015

In this study, we confirmed biological compounds from methanol (MeOH) extract of processed Polygoni Multiflori Radix (PPMR), and the radical scavenging effect and oxidative stress protective activity of MeOH extract of PPMR were investigated under in vitro conditions using LLC-$PK_1$ renal epithelial cells. In HPLC analysis, MeOH extract of PPMR contained four species of biological compounds named 2,3,5,4'-tetrahydroxystilbene 2-O-${\beta}$-D-glucoside, emodin, chrysophanol, and rhein. 2,3,5,4'-Tetrahydroxystilbene 2-O-${\beta}$-D-glucoside was detected as the main compound in PPMR as 115.02 mg/kg. MeOH extract of PPMR showed 2,2-diphenyl-1-picrylhydrazyl (DPPH), 2,2'-azino-bis (3-ethylbenzthiazoline-6-sulphonic acid) diammonium salt (ABTS), and hydroxyl radical scavenging activities in a concentration- dependent manner. In particular, upon $50{\mu}g/mL$ of PPMR extract treatment, DPPH, ABTS, and hydroxyl radical scavenging activities were approximately 48.4%, 57.9%, and 81.2%, respectively. LLC-$PK_1$ cell viability declined in response to oxidative stress induced by pyrogallol, sodium nitroprusside (SNP), and morpholinosydnonimine (SIN-1) generators of NO, $O_2{^-}$, and $ONOO^-$, respectively. However, MeOH extract of PPMR significantly and dose-dependently inhibited oxidative-stressed LLC-$PK_1$ cell cytotoxicity. In fact, upon $50{\mu}g/mL$ of PPMR extract treatment, LLC-$PK_1$ cell viabilities were approximately 82.1%, 89.1%, and 77.6% compared to stress levels induced by pyrogallol, SNP, and SIN-1, respectively.

• Journal of Korean Society of Forest Science
• /
• 제90권6호
• /
• pp.699-706
• /
• 2001

This study was conducted to evaluate the effectiveness of basic oxygen furnace (BOF) slag as soil conditioner in a nursery and two natural forests. The BOF slag was applied at rates of 0, 4, 8, and 12 t/ha for seedbed nursery of three tree species-Pinus densiflora, Larix leptolepis and Amorpha fruticosa; and 0, 10, 20, and 40 t/ha for Pinus densiflora natural forests located at two sites. In case of the nursery study, the significant increase in soil pH and contents of Ca, Mg, $SiO_2$, Fe and Mn was noticed after six months of the BOF slag application. Dry weight of Pinus densiflora seedlings with BOF slag treatments was lower compared with that of control. There were no significant differences among treatments in dry weight of Larix leptolepis seedlings. Dry weight of Amorpha fruticosa seedlings, which are deciduous species and grow rapidly at seedling stage, increased significantly and T/R ratio decreased as BOF slag rate increased. The differences of effects of BOF slag application on the seedlings of tree species may be attributed to the differences of optimum pH range of the species. In Pinus densiflora natural forests, there were no significant differences in soil pH and contents of $SiO_2$, Fe and Mn among the treatments, but these values became higher as BOF slag rate increased. Contents of Ca in soil became significantly higher as BOF slag rate increased. There were no significant differences among treatments in net production of mature Pinus densiflora trees, but BOF slag rate of 10ton/ha showed the highest net production. Young Pinus densiflora trees at the plots of BOF slag rate of 10 t/ha showed significantly higher root collar diameter growth rate and twig net production than those of other treatments. It may be given as a conclusion that BOF slag application in nursery and forest soil increased soil pH and contents of Ca, $SiO_2$, Fe and Mn in soil and they showed the ability of BOF slag to be used as a soil conditioner in strongly acid soil.

• Journal of agriculture & life science
• /
• 제46권6호
• /
• pp.105-115
• /
• 2012

The detailed proximate, fatty/amino acid, mineral composition, texture, color, chemical and taste compounds of six oysters (four kinds of cultured oysters and two kinds of wild oysters) in Korea were investigated. Length and weight of the shell removed cultured and wild oysters were 4.7~5.1 and 3.0~4.2 cm, and 5.9~9.1 and 2.6~5.5 g, respectively. The proximate compositions were not significantly different between cultured and wild oysters. Amino nitrogen and volatile basic nitrogen content of these ones were 232.8~258.2 and 160.5~213.9 mg/100 g, 9.5~12.0 and 7.8~9.5 mg/100 g, respectively. As a texture characteristic of muscle, shearing force were 95~114 and 105~132 g. Amounts of total amino acids of cultured and wild oysters were 9,004~10,198 and 8,165~8,942 mg/100 g, respectively. Major amino acids and inorganic ions were aspartic acid, glutamic acid, proline, alanine, leucine, phenylalanine, lysine, arginine and K, Na, Ca, Fe, S, P, Zn. Major fatty acids of these ones were 16:0, 18:0, 16:1n-9, 18:1n-9, 22:1n-9, 16:4n-3, 20:5n-3 and 22:6n-3, and there was little difference between the two groups. Amounts of free amino acids of cultured and wild oysters extracts were 1,444~1,620 and 1,017~1,277 mg/100 g, respectively, and major ones were taurine, glutamic acid, glycine, alanine, tryptophan, ornithine and lysine. There is a little difference in glycine, tryptophan, ornithine and arginine contents, but TMAO and TMA contents were low in amount, and were not significantly different between the two groups.

• Korean Journal of Dental Materials
• /
• 제44권3호
• /
• pp.263-272
• /
• 2017

In this study, antibacterial chlorhexidine (CHX)-containing hydroxyapatite (HAp) was coated on titanium and investigated its characteristics. Ti-mSBF-CHX group was prepared by soaking titanium disks in the modified simulated body fluid (mSBF) mixed with CHX. Ti-mSBF group was coated using mSBF without CHX. Ti-mSBF-adCHX group was prepared by soaking Ti-mSBF specimen in CHX-containing solution. The crystallines clusters composed with nano-shaped crystallites were coated on the surface of the Ti-mSBF specimen. The ribbon-shaped crystallites were observed with the crystalline clusters on the Ti-mSBF-CHX specimen. The content of CHX chemical compositions was high in ribbon-shaped crystallites. HAp crystalline structure was dominant for all prepared specimens, and ${\beta}-TCP$ (tricalcium phosphate) and OCP (octacalcium phosphate) crystalline structures were observed in the Ti-mSBF-CHX specimen. FT-IR spectra showed the strong peaks of CHX in Ti-mSBF-adCHX and Ti-mSBF-CHX groups. However, after immersing in a phosphate buffered saline (PBS), CHX was rapidly released in Ti-mSBF-adCHX group, while it was slowly released in Ti-mSBF-CHX. We expect that the coating method of Ti-mSBF-CHX group could be used for protecting inflammation of titanium implant by incorporating antibacterial agent CHX into HAp layer.

• Food Engineering Progress
• /
• 제13권2호
• /
• pp.117-121
• /
• 2009

Detection of spoilage odors from beef during storage was investigated using sensory evaluation with R-index, and microbial assay for Pseudomonas. Beef samples were tested to measure the flavor changes, which were converted to R-index, and the Pseudomonas levels during storage. There was a steep rise in R-index until 36 hr after storage at 25$^{\circ}C$, and then a gentle rise from 48 hr, whereas, there was a steady rise in R-index in the whole range of storage at 5$^{\circ}C$. Detection time of spoilage odors according to R-index was statistically analyzed at $\alpha$=5% to be at 30.92${\pm}$3.47 hr and 169.80${\pm}$11.27 hr for 25 and 5$^{\circ}C$ storage, respectively, and analyzed at $\alpha$=1% to be 34.80${\pm}$4.01 and 176.41${\pm}$9.89 hr for 25 and 5$^{\circ}C$ storage, respectively. At the detection times of spoilage odors, the Pseudomonas levels were found to be almost the same, but less than 6-7 log CFU/g generally known as a standard level at occurrence of spoilage odors in beef. This indicated that some other factors than the Pseudomonas reactions could be associated with generation of spoilage odors.

• Journal of agriculture & life science
• /
• 제44권2호
• /
• pp.7-15
• /
• 2010

This study was conducted to investigate the bacteriological and physiological quality of seawater and surface sediments in Sacheon Bay of Korea from January to September in 2009. During the study period, the means of temperature was range from 5.3 to $24.9^{\circ}C$ (mean $17.7{\pm}0.4^{\circ}C$), transparency range from 1.4 to 2.5 m (mean $1.8{\pm}0.5m$), suspended solid ranged from 16.2 to 35.8 mg/L (mean $24.2{\pm}2.2mg/L$), chemical oxygen demand ranged from 1.42 to $3.29mgO_2/L$ (mean $2.06{\pm}0.55mgO_2/L$), dissolved oxygen ranged from 6.7 to 9.5mg/L (mean $7.9{\pm}0.6mg/L$), respectively. Seafood, if eaten raw, carries the risk of food poisoning. Seafood poisoning is often cause by pathogenic microorganism originating from fecal contamination, such as Salmonella sp., Shigella sp. and norovirus. Fecal coliforms are an important indicator of fecal contamination. Therefor, data on fecal coliform are very important for evaluating the safety of fisheries in coastal areas. So, we investigated the sanitary indicate bacteria. In this study, 56 sea water samples were collected from the Sacheon Bay, and total and fecal coliforms were compared and analyzed. The coliform group and fecal coliform MPN's of sea water in Sacehon Bay were ranged from <1.8~7,900 MPN/100mL (GM 214.7 MPN/100mL) and <1.8~330 MPN/100mL (GM 9.7 MPN/ 100mL), respectively. Total coliforms were detected in 75.0% of the samples and 76.2% of the total coliforms were fecal coliforms. During the study period, the means of water content, ignition loss, COD, and acid volatile sulfates in sediments in Sacheon Bay were $53.28{\pm}2.58%$, $9.38{\pm}0.42%$, $14.23{\pm}3.36mgO_2/g$, $0.09{\pm}0.07mgS/g$, respectively.

• Journal of agriculture & life science
• /
• 제45권5호
• /
• pp.81-89
• /
• 2011

This study was carried out to investigate changes in physicochemical and sensory properties of cooked sausages replaced sodium chloride (NaCl) to potassium chloride (KCl) or magnesium chloride ($MgCl_2$) during storage for 30 days under $4^{\circ}C$. All sausages were prepared with different combination of salts as follow; CTL (1.5% NaCl), KCL (0.9% NaCl+0.6% KCl), MCL (0.9% NaCl+0.6% $MgCl_2$), KML (0.9% NaCl+0.3% KCl+0.3% $MgCl_2$) and PST (1.5% PanSalt). Among sausages moisture content in KML was the highest (p<0.05). Lightness and redness in CTL were lower than those of other treatments, but MCL and KML containing $MgCl_2$ showed higher CIE $L^*$ and $a^*$ values than CTL. The pH in CTL was the highest during storage, however, no significant difference was determined between two treatments, MCL and KML (p>0.05). Crude fat content and water holding capacity (WHC), hardness and cohesiveness of MCL sausages were higher than those of CTL. In sensory characteristics of cooked sausages, saltness in MCL was the lowest during 10 and 20 days of storage (p<0.05). Yellowness in PST was lower than other treatmeants. Gumminess and chewiness of texture property of sausages from MCL and KML were higher than CTL. The results indicate that the replacement of NaCl by KCl improved texture, but meat color was not improved as expected. In contrast, the replacement of NaCl by $MgCl_2$ enhanced color, texture and WHC, whereas partial replacement of NaCl by $MgCl_2$ must reduce bitter taste as compared to sausages manufactured with a NaCl only. Therefore, $MgCl_2$ may be a salt replacing NaCl in cooked pork sausages.

• Journal of Korea Water Resources Association
• /
• 제52권11호
• /
• pp.917-929
• /
• 2019

Denitrification in streams is of great importance because it is essential for amelioration of water quality and accurate estimation of $N_2O$ budgets. Denitrification is a major biological source or sink of $N_2O$, an important greenhouse gas, which is a multi-step respiratory process that converts nitrate ($NO_3{^-}$) to gaseous forms of nitrogen ($N_2$ or $N_2O$). In aquatic ecosystems, the complex interactions of water flooding condition, substrate supply, hydrodynamic and biogeochemical properties modulate the extent of multi-step reactions required for $N_2O$ flux. Although water flow in streambed and residence time affect reaction output, effects of a complex interaction of hydrodynamic, geomorphology and biogeochemical controls on the magnitude of denitrification in streams are still illusive. In this work, we built a two-dimensional water flow channel and measured $N_2O$ flux from channel sediment with different bed geomorphology by using static closed chambers. Two independent experiments were conducted with identical flume and geomorphology but sediment with differences in dissolved organic carbon (DOC). The experiment flume was a circulation channel through which the effluent flows back, and the size of it was $37m{\times}1.2m{\times}1m$. Five days before the experiment began, urea fertilizer (46% N) was added to sediment with the rate of $0.5kg\;N/m^2$. A sand dune (1 m length and 0.15 m height) was made at the middle of channel to simulate variations in microtopography. In high- DOC experiment, $N_2O$ flux increases in the direction of flow, while the highest flux ($14.6{\pm}8.40{\mu}g\;N_2O-N/m^2\;hr$) was measured in the slope on the back side of the sand dune. followed by decreases afterward. In contrast, low DOC sediment did not show the geomorphological variations. We found that even though topographic variation influenced $N_2O$ flux and chemical properties, this effect is highly constrained by carbon availability.

• Journal of Microbiology and Biotechnology
• /
• 제29권10호
• /
• pp.1607-1623
• /
• 2019

Sediment bioelectrochemical systems (SBESs) can be integrated into brackish aquaculture ponds for in-situ bioremediation of the pond water and sediment. Such an in-situ system offers advantages including reduced treatment cost, reusability and simple handling. In order to realize such an application potential of the SBES, in this laboratory-scale study we investigated the effect of several controllable and uncontrollable operational factors on the in-situ bioremediation performance of a tank model of a brackish aquaculture pond, into which a SBES was integrated, in comparison with a natural degradation control model. The performance was evaluated in terms of electricity generation by the SBES, Chemical oxygen demand (COD) removal and nitrogen removal of both the tank water and the tank sediment. Real-life conditions of the operational parameters were also experimented to understand the most close-to-practice responses of the system to their changes. Predictable effects of controllable parameters including external resistance and electrode spacing, similar to those reported previously for the BESs, were shown by the results but exceptions were observed. Accordingly, while increasing the electrode spacing reduced the current densities but generally improved COD and nitrogen removal, increasing the external resistance could result in decreased COD removal but also increased nitrogen removal and decreased current densities. However, maximum electricity generation and COD removal efficiency difference of the SBES (versus the control) could be reached with an external resistance of $100{\Omega}$, not with the lowest one of $10{\Omega}$. The effects of uncontrollable parameters such as ambient temperature, salinity and pH of the pond (tank) water were rather unpredictable. Temperatures higher than $35^{\circ}C$ seemed to have more accelaration effect on natural degradation than on bioelectrochemical processes. Changing salinity seriously changed the electricity generation but did not clearly affect the bioremediation performance of the SBES, although at 2.5% salinity the SBES displayed a significantly more efficient removal of nitrogen in the water, compared to the control. Variation of pH to practically extreme levels (5.5 and 8.8) led to increased electricity generations but poorer performances of the SBES (vs. the control) in removing COD and nitrogen. Altogether, the results suggest some distinct responses of the SBES under brackish conditions and imply that COD removal and nitrogen removal in the system are not completely linked to bioelectrochemical processes but electrochemically enriched bacteria can still perform non-bioelectrochemical COD and nitrogen removals more efficiently than natural ones. The results confirm the application potential of the SBES in brackish aquaculture bioremediation and help propose efficient practices to warrant the success of such application in real-life scenarios.

• Journal of Energy Engineering
• /
• 제28권3호
• /
• pp.65-79
• /
• 2019

The study attempted to estimate the optimal facility capacity by combining renewable energy sources that can be connected with gas CHP in industrial complexes. In particular, we reviewed industrial complexes subject to energy use plan from 2013 to 2016. Although the regional designation was excluded, Sejong industrial complex, which has a fuel usage of 38 thousand TOE annually and a high heat density of $92.6Gcal/km^2{\cdot}h$, was selected for research. And we analyzed the optimal operation model of CHP Hybrid System linking fuel cell and photovoltaic power generation using HOMER Pro, a renewable energy hybrid system economic analysis program. In addition, in order to improve the reliability of the research by analyzing not only the heat demand but also the heat demand patterns for the dominant sectors in the thermal energy, the main supply energy source of CHP, the economic benefits were added to compare the relative benefits. As a result, the total indirect heat demand of Sejong industrial complex under construction was 378,282 Gcal per year, of which paper industry accounted for 77.7%, which is 293,754 Gcal per year. For the entire industrial complex indirect heat demand, a single CHP has an optimal capacity of 30,000 kW. In this case, CHP shares 275,707 Gcal and 72.8% of heat production, while peak load boiler PLB shares 103,240 Gcal and 27.2%. In the CHP, fuel cell, and photovoltaic combinations, the optimum capacity is 30,000 kW, 5,000 kW, and 1,980 kW, respectively. At this time, CHP shared 275,940 Gcal, 72.8%, fuel cell 12,390 Gcal, 3.3%, and PLB 90,620 Gcal, 23.9%. The CHP capacity was not reduced because an uneconomical alternative was found that required excessive operation of the PLB for insufficient heat production resulting from the CHP capacity reduction. On the other hand, in terms of indirect heat demand for the paper industry, which is the dominant industry, the optimal capacity of CHP, fuel cell, and photovoltaic combination is 25,000 kW, 5,000 kW, and 2,000 kW. The heat production was analyzed to be CHP 225,053 Gcal, 76.5%, fuel cell 11,215 Gcal, 3.8%, PLB 58,012 Gcal, 19.7%. However, the economic analysis results of the current electricity market and gas market confirm that the return on investment is impossible. However, we confirmed that the CHP Hybrid System, which combines CHP, fuel cell, and solar power, can improve management conditions of about KRW 9.3 billion annually for a single CHP system.