• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.773-777
• /
• 2005

This article is about using information technology to apply with water loss inspection system in District Metering Area (DMA). Inspector can check Flow rate and Minimum Night Flow; NMF via Smart Phone or PDA include sending SMS Alert in case the Pressure, Flow rate and NMF is over the range of controlling. This will be used as equipment to implement water loss in international proactive and can keep on water loss reduction more efficiency. The system consists of Data Logger which collects data of Flow rate from DMA Master Meter. PC is Wap Server which dial via modem in order to get data through FTP Protocal that will convert text file to Microsoft Access Database. Wappage will use xhtml language to show database on Wapbrowser and can show the result on Smart Phone or PDA by graph and table for system analysis.

• 농업과학연구
• /
• 제38권3호
• /
• pp.541-547
• /
• 2011

Korean building industry was developed by concrete and steel construction. However, concrete and steel have some problems which low carbon storage capability and difficulty of recycling. According to many studies, timber has high carbon storage capability, high recycling capability and sustainable supporting capability. Focus on this factors of timber, make new wall structure as Green Timber Wall panels and check the shear performance to use wall system in housing construction such as light-weight timber construction and nondearing wall on other construction. In the results, B-4-B and B-4-S show similar modulus of shear stiffness on the table. GH-4-GH has slip shape failure mode between Green Timber Wall boards. GH-4-GV has most stable characteristic curve than other specimens.

• 대한기계학회논문집A
• /
• 제27권4호
• /
• pp.647-655
• /
• 2003

This paper studies the observability of calibration system with a constraint movement by a constraint operator. The calibration system with the constraint movement need only simple sensing device to check whether the constraint movements are completed within an established range. However, it yields the concern about the poor parameter observability due to the constraint movements. This paper uses the QR-decomposition to find the optimal calibration configurations maximizing the linear independence of rows of a observation matrix. The number of identifiable parameters are examined by the rank of the observation matrix, which represents the parameter observability. The method is applied to a parallel typed machining center and the calibration results are presented. These results verify that the calibration system with low-cost indicators and simple planar table is accurate as well as reliable.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.258-263
• /
• 2005

Because of its high performance and accuracy, electron beam welding has an important role in industrial applications such as semi-conductor and LCD manufactures. Since its operation has been done in a vacuum room, it is very difficult to check out their weldability as well as the correct welding area of the specimen. In this study, a measurement system of the electron beam welding has been developed based on the 3-axis LVDT controlled table. In addition, the algorithm to tracking the welding line has been developed. Welded regions were measured by using an A-scan ultrasonic sensor only. Weldability of the aluminum specimen has been tested by newly developed measuring system. The results are compared with those by using an C-scan ultrasonic sensor, which show good agreements with each other.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2005년도 추계학술대회 및 정기총회
• /
• pp.113-121
• /
• 2005

Virtual Manufacturing is a powerful methodology for developing a new product, new equipment and new production system. It enables us to check the errors in design before production. This paper deals with a case study of virtual manufacturing in an excavator factory. Boom and rotating table of upper body are selected for application. 3D models of parts and fixtures are developed with CATIA and 3D simulation models are developed with IGRIP. These models are used for the design of fixture to verify the motion of the equipment. As a result, the manual welding systems are replaced by automatic systems and many design errors are corrected in the design phase, which enables us to reduce the developing cost and time.

• Journal of the Korean Data and Information Science Society
• /
• 제23권3호
• /
• pp.587-593
• /
• 2012

We study Bayesian estimates for finite population proportions in multinomial problems. To do this, we consider a three-stage hierarchical Bayesian model. For prior, we use Dirichlet density to model each cell probability in each cluster. Our method does not require complicated computation such as Metropolis-Hastings algorithm to draw samples from each density of parameters. We draw samples using Gibbs sampler with grid method. We apply this algorithm to a couple of simulation data under three scenarios and we estimate the finite population proportions using two kinds of approaches We compare results with the point estimates of finite population proportions and their standard deviations. Finally, we check the consistency of computation using differen samples drawn from distinct iterates.

• 한국항공우주학회지
• /
• 제36권3호
• /
• pp.291-297
• /
• 2008

아리안-5 발사체를 이용한 통신해양기상위성 발사에 대하여 소개되었다. 먼저, 통신해양기상위성이 간단히 소개되고, 20%의 추력 향상을 위한 아리안-5G 발사체의 발칸-1 엔진으로부터 아리안-5ECA 발사체의 발칸-2 엔진으로의 개량에 대한 상세한 설명을 포함하여 아리안 5 발사체에 대하여 소개되었다. 그 다음 통신해양기상위성의 발사과정에 대하여 소개되었다. 아리안-5 발사체는 남미 프랑스령 기아나의 쿠루시에 있는 기아나스페이스센터에서 발사된다. 위성처리시설에서 최종점검을 마치면 같은 건물 내의 위험처리시설로 옮겨져 연료를 주입하고, 그곳에서 발사체 어댑터에 결합된 후 최종조립건물로 이동된다. 최종조립건물 내의 발사 테이블 위에서 조립되는 발사체 위에 같이 발사될 위성들이 결합된 후 발사 테이블이 발사체를 싣고 발사대로 이동하여 발사한다. 발사체가 비행하는 동안의 비행 과정에 대해서도 소개되었다.

• Journal of Plant Biology
• /
• 제4권1호
• /
• pp.9-11
• /
• 1961

A comparative investigation of free amino acids content in healthy check and virus diseased leaves of Chinese date tree, Zyzyphus jujuqa Mill var. inermis Rhed, was carried out by authors throughout the growing season of 1959 and 1960 from June to October. The methods of qualitative analysis of free amino acids aplied in this experiment is followed by Moore and Stein. Free amino acids determined in this experiment are shown in Fig. 1 and Table 1. As the figure and the table are shown, three more amino acids such as glutamine, asparagine and histidine are detected in the diseased material. The additional amino acids which are known as diamines in diseased leaves are conspicuous. It is presumed that the diamine might be incresed by the self-reproduction of the virus in cooporation with certain enzymes which are carrying out the protein metabolism in the host protoplast in contrast with the healthy checks which is carrying out normal protein metabolism. From the histological poing of view, the facts of phloem degeneration or necrosis in diseased leaves, it seems to interrupt to move free amino acids from roots to leaves and it possibly takes place an excessive production of NH3 which is diaminated by the metabolism of nitrogen compounds in such conditioned leaves. Therefore, it is also presumed that additional diamino acids are accumulated in diseased leaves. There are no change of amino acids are accumulated in diseased leaves. There are no change of amino acids in both materials of this plant throughout the growing season qualitatively, and this result agress with the paper of Knight.

• 한국전산구조공학회논문집
• /
• 제20권4호
• /
• pp.463-468
• /
• 2007

최근 일본에서 발생한 지진으로 이동통신용 전자장비들이 많이 파손되었으나. 국내에서 제작되어 일본에 설치된 모제품은 강진에서도 대부분 구조적 손상이 없었다. 본 논문에서는 이동통신 네트워크 장비의 정/동적 특성을 평가하기 위하여 제품의 유한요소 모델을 생성하여 정적 및 동적 구조해석을 수행하였다. 또한 Zone 3 GR-63-CORE 동적 실험을 수행하여 제품의 안정성을 검증하였고, 유한요소 구조해석 결과와 비교하여 실험과 해석 결과가 유사함이 입증되었다. 구조해석 결과인 동적 응답특성은 실험보다 다소 크게 나왔으며, 부재의 특성파악을 위해 구조물의 치수를 설계변수로 하여 진동특성에 대한 민감도 해석으로 고유진동수에 민감한 부재를 판별하였고, 치수변경으로 경량화 설계치를 산출하였다. 경량화된 디자인의 동적 응답변위가 원래 디자인보다 작게 나와 최적화 결과가 유용할 것으로 보인다.

• 한국정보통신학회논문지
• /
• 제20권3호
• /
• pp.543-548
• /
• 2016

공인인증서는 본인 확인을 위한 중요한 수단으로 금융거래, 전자정부, 전자상거래 등 주요 경제활동에서 사용되고 있다. 그러나 공인인증서의 부정 발급 및 해킹 등으로 피해 사례가 증가하고 있으나, 사용자는 자신의 공인인증서가 언제, 어디서 사용되었는지 확인하기가 어려운 현실이다. 따라서 제안하는 시스템은 OCSP 서비스 과정에서 공인인증서를 이용하는 기관에 대한 기관코드를 사전에 부여하고, 이용기관에서 공인인증기관에 인증서 검증 요청 시 기관코드를 OCSP Request의 Extensions 부분에 삽입하여 메시지를 전송하며, OCSP 서버는 기관코드를 추출하여 요청기관을 확인하고 해당 결과를 데이터베이스의 이력관리 테이블에 기록하게 된다. 본 논문에서는 인증서 검증 서비스인 OCSP를 사용하여 사용자가 공인인증서 사용이력을 확인할 수 있는 시스템을 제안하고 구현하여 금융사고 등을 방지하고 대처할 수 있도록 한다.