• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.1
• /
• pp.29-33
• /
• 2011

Background and Purpose: Uniformity is the one of the important quality control features with respect to gamma cameras. To maintain adequate uniformity, we must acquire suitable flood table (=flood map) data because the flood table effects energy, and the type or dose of input radiation. Therefore, in this study we evaluated the difference in uniformity when uniformity does not match between the type of input radiation and the flood table data or collimator type. Subjects and Methods: For input radiation, we prepared 370 MBq of $^{57}Co$, $^{99m}Tc$, and $^{201}Tl$. Using SKYLight (Philips) and Infinia gamma cameras (GE), we acquired nine uniformity data that were corrected by technetium, cobalt flood table and did not corrected image for the three sources. Additionally, we acquired two uniformity images with a collimator that were corrected by intrinsic and extrinsic flood tables. Using this data, we evaluated and compared the uniformity values. Results: In the case of the SKYLight gamma camera, the uniformities of the images that matched between the input radiation and flood table with respect to $^{99m}Tc$ and $^{57}Co$ were better than the unmatched uniformity (3.96% vs. 5.69% ; 4.9% vs. 5.91%). However, because there was no thallium flood table, the uniformities of images at Tl were significantly incorrect (7.49%, 7.03%). The uniformities of the Infinia gamma camera had the same pattern as the SKYLight gamma camera (3.7% vs. 4.5%). Moreover, the uniformity of the $^{99m}Tc$ image acquired with a collimator and corrected by an extrinsic flood table was better than the intrinsic flood table (3.96% vs. 6.28%). Conclusion: Correcting an image by a suitable flood table can help achieve better uniformity for a gamma camera. Therefore, we have to acquire images with suitable uniformity correction, and update the flood table periodically. Whenever we acquire a nuclear medicine image, we always have to check the appropriate flood table according to the acquired condition.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.5
• /
• pp.415-422
• /
• 2013

In this paper, we present Self-Checking look-up-table (LUT) based on Scalable Error Detection Coding (SEDC) scheme for use in fault-tolerant reconfigurable architectures. SEDC scheme has shorter latency than any other existing coding schemes for all unidirectional error detection and the LUT execution time remains unaffected with self-checking capabilities. SEDC scheme partitions the contents of LUT into combinations of 1-, 2-, 3- and 4-bit segments and generates corresponding check codes in parallel. We show that the proposed LUT with SEDC performs better than LUT with traditional Berger as well as Partitioned Berger Coding schemes. For 32-bit data, LUT with SEDC takes 39% less area and 6.6 times faster for self-checking than LUT with traditional Berger Coding scheme.

• Journal of Industrial Technology
• /
• v.26 no.B
• /
• pp.199-206
• /
• 2006

Internet telephony provides voice communication services with added flexibility for multimedia extension at a lower cost compared to traditional telephone systems. We implemented an internet telephony system as an overlay network without a centralized server, using a distributed hash table (DHT). Compared to the current server-based internet telephony system, our system is fault-tolerant, scalable, and can be flexible extended to various services and advanced to integrated service. To demonstrate the high flexibility of our DHT-based internet telephony system, we made our system cooperate with web servers. Web users can check up others' online stales and establish voice communication sessions to online users at a mouse click. This technology can be applied to more complex services such as multimedia messaging or video conference service.

• Journal of KSNVE
• /
• v.7 no.5
• /
• pp.789-796
• /
• 1997

In this study a conventional rubber mount and a new form of base isolator made of steel spring coated with natural and articial rubber were manufactured and tested on a shaking table to investigate the capacity of reducing the vertical vibration of a building induced by subway train. The model structure used in the test is a 1/4 scaled steel structure, and a white noise input and train vibration records were used to check the effectiveness of the isolators. According to the results all three types of isolators turned out to perform effectively in reducing the acceleration and the natural rubber-coated one is ranked best among the isolators. However the vertical displacement of the model is increased due to the instolation of the bearings, and the safty against the lateral load induced by earthquake ground motion should be provided to be able to apply the system to the real buildings.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.1 no.1
• /
• pp.51-56
• /
• 1997

The objective of this study is to review the current state of earthquake simulation tecniques using the shaking table and check the reliability. One degree-of-freedom(d.o.f) and three d.o.f aluminium shear models were used and $4m{\times}4m$ 6 d.o.f shaking table was excitated in one horizontal direction to simulate 1940 El centro earthquake accelerogram (NS component). When the actual acceleration history of shaking table is compared to the desired one, it can be found that the overall histories are very similar, but that the lower frequency range (0~2 Hz) of the actual excitation has generally lower amplitude than that of the desired in Fourier transform amplitude. Free vibration and white noise tests have shown almost the some values for natural frequencies, but shown quite different values for damping rations, that is, 1.37% in case of free vibration test vs 14.76 % in case of white noise test. The time histories of story shear driff show the globally linear elastic behaviors. But the elliptical shape of the histories with one of the axis being the stiffness of the story implies the effect of viscous damping.

• ETRI Journal
• /
• v.28 no.6
• /
• pp.745-760
• /
• 2006

In this paper, we particularly deal with no $F_p$-rational two-torsion elliptic curves, where $F_p$ is the prime field of the characteristic p. First we introduce a shift product-based polynomial transform. Then, we show that the parities of (#E - 1)/2 and (#E' - 1)/2 are reciprocal to each other, where #E and #E' are the orders of the two candidate curves obtained at the last step of complex multiplication (CM)-based algorithm. Based on this property, we propose a method to check the parity by using the shift product-based polynomial transform. For a 160 bits prime number as the characteristic, the proposed method carries out the parity check 25 or more times faster than the conventional checking method when 4 divides the characteristic minus 1. Finally, this paper shows that the proposed method can make CM-based algorithm that looks up a table of precomputed class polynomials more than 10 percent faster.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.1
• /
• pp.43-48
• /
• 2023

This paper discusses the design of 32Mbyte asynchronous nonvolatile memory modules, which includes self-diagnosis and RTC (Real Time Clock) functions to enhance their data stability and reliability. Nonvolatile memory modules can maintain data even in a power-off state, thereby improving the stability and reliability of a system or device. However, due to the possibility of data error due to electrical or physical reasons, additional data loss prevention methods are required. To minimize data error in asynchronous nonvolatile memory modules, this paper proposes the use of voltage monitoring circuits, self-diagnosis, BBT (Bad Block Table), ECC (Error Correction Code), CRC (Cyclic Redundancy Check)32, and data check sum, data recording method using RTC. Prototypes have been produced to confirm correct operation and suggest the possibility of commercialization.

• Korean Journal of Breeding Science
• /
• v.42 no.3
• /
• pp.212-217
• /
• 2010

A new waxy corn hybrid 'Daedukchal 1' was developed from single cross between CNU 504 and CNU 2396 at Chungnam National University in 2007. Inbred CNU 504 used as a seed parent and inbred CNU 2396 as a pollen parent were collected throughout domestic regions. Tasseling date of this hybrid was seven days later than that of check hybrid, 'Chalok 1'. 'Daedukchal 1' was 19.7 cm in ear length and 4.5 cm in ear diameter. On yield trial, ear length of this hybrid was increased 29.7% compared with a check hybrid, 'Chalok 1'. 'Daedukchal 1' had white kernels and good eating quality due to high sugar content and thinner pericarp. The ratio of kernel set length/ear length was similar to 'Chalok 1'. It is moderately resistant to southern leaf blight and northern leaf blight but susceptible to corn borer. The yields of 'Daedukchal 1' in fresh ear weight and in number of fresh ear were 16% and 8%, respectively, higher than those of a check hybrid in regional yield trials for two years. Seed production for this hybrid was better because of the consistency of tasseling dates.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10b
• /
• pp.582-584
• /
• 1998

객체 지향 설계 명세를 대상으로한 시스템의 안전성에 대한 검사를 하여, 표(Table)조작에 기초한 검증법을 제안하였다[4]. 제안한 검증법에서는 전문 분야별로 준비된 안정성 기준(Safety Standard)과 노우하우(Knowhow)를 이용하여, 안전성에 관한 이벤트(Event)와 액션(Action)의 관계표를 작성하였다. 그러나, 많은 실제 개발 현장에서는 실제 존재하는 안전성 기준의 부족 등으로 인하여, 이러한 검증법의 기용이 어렵다는 문제점이 있다. 이에 본 논문에서는 신뢰성 분석의 한 방법인 FTA(Fault Tree Analysis)의 FT(Fault Tree)도를 이용한 안정성 체크리스트(Check list)를 작성하여, 이를 바탕으로 관계표를 작성하는 새로운 방법을 제안하고자 한다.

• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.3
• /
• pp.201-207
• /
• 2000

In this study, methodologies for checking the interference between in-core instrumentation (ICI) guide tubes for routing of ICI guide tubes in the reactor coolant system of typical Pressurized Water Reactor under cold and normal operation (NOP) conditions are presented. The closest points of ICI guide tubes under cold condition are calculated by using minimize technique and are used as data for NOP analysis. Movements of ICI guide tubes under NOP condition are performed by the commercial computer code, SUPERPIPE.