• Journal of the Korean Regional Science Association
• /
• v.37 no.1
• /
• pp.45-61
• /
• 2021

This research purposes to design a methodological framework to suggest the optimal method to resolve the conflicts of stakeholders surrounding the water use charge of the Han River region, and to use the analysis results to provide the direction of policy. For this, it was preceded that the process of understanding the mechanisms of the multifaceted conflict between decision makers taking different positions over water use charge of the Han River region, and an optimal method to resolve the conflict of water use charge of the Han River region was derived by using a graph model for conflict resolution(GMCR). According to the analysis results, the optimal state to find a solution to the water use charge of the Han River is that the Seoul-Incheon-Gyeonggi region pays the charge according to the original rate while Seoul-Incheon requesting discount the water use rate. In addition, the Han River management committee should establish policies desired by Seoul-Incheon-Gyeonggi region including rationalization of the decision-making structure to determine the rate of water use charge, making the basis to support the Han River management fund system for the Seoul-Incheon region, and transparent management of the Han River management fund system considering the characteristics of beneficiary regions and residents. This study is expected to provide objective decision-making information in establishing environmental policy directions related to conflict resolution in the water use charge of the Han River region and to offer a methodological basis for similar follow-up studies related to conflicts derived from sharing nature environment.

• Journal of Nutrition and Health
• /
• v.53 no.6
• /
• pp.688-701
• /
• 2020

Purpose: This study was performed to evaluate the importance and satisfaction of the selective attributes of delivery food and to analyze the factors affecting customer satisfaction. Methods: A total of 574 responses were collected from customers who had ordered delivery food for data analysis. Statistical analyses were conducted using the SPSS program (ver. 25.0) for frequency analysis, χ2 tests, t-test, factor analysis, Pearson correlation, multiple regression analysis, and Importance-Performance Analysis (IPA). Results: The importance of delivery food selection attributes was higher in the order of 'hygiene control level (4.72)', 'taste of food (4.64)', and 'delivery accuracy (4.40)'. Satisfaction assessment was higher in the order of 'taste of food (4.32)', 'delivery accuracy (4.26)', and 'convenience of using the delivery app (4.21)'. According to the results of IPA, items that were priorities for improvement were charges for delivery, discount offers, sufficient description of the menu, and rapid handling of customer complaints. On an average, overall customer satisfaction score of delivery food was 4.01 out of 5 points. Additionally, five satisfaction factors were extracted by exploratory factor analysis. According to the results of multiple regression analysis, quality of delivery platform (p < 0.001), quality of delivery service (p < 0.001), convenience and diversity (p < 0.001), quality of delivery food (p < 0.001), and health and safety (p < 0.001) had significant positive effects on overall customer satisfaction. Conclusion: To increase customer satisfaction among delivery food customers, restaurant or delivery platform managers should consistently improve not only the quality of the delivery platform but also the quality of the delivery food and service.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.55-60
• /
• 2020

The PERC photovoltaic (PV) modules installed in PV power plant are still reports potential-induced degradation (PID) degradation due to high voltage potential differences. This is because Na+ ions in the cover glass of PV modules go through the encapsulant (EVA) and transferred to the surface of solar cells. As positive charges are accumulated at the ARC (SiOx/SiNx) interface where many defects are distributed, shunt-resistance (Rsh) is reduced. As a result, the leakage current is increased, and decrease in solar cell's power output. In this study, to prevent of this phenomenon, a Moth-eye nanostructure was deposited on the rear surface of an optical film using Nano-Imprint Lithography method, and a solar mini-module was constructed by inserting it between the cover glass and the EVA. To analyze the PID phenomenon, a cell-level PID acceleration test based on IEC 62804-1 standard was conducted. Also analyzed power output (Pmax), efficiency, and shunt resistance through Light I-V and Dark I-V. As a result, conventional solar cells were decreased by 6.3% from the initial efficiency of 19.76%, but the improved solar cells with the Moth-eye nanostructured optical film only decreased 0.6%, thereby preventing the PID phenomenon. As of Moth-eye nanostructured optical film, the transmittance was improved by 4%, and the solar module output was improved by 2.5%.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.19 no.1
• /
• pp.1-7
• /
• 2021

Purpose: The purpose of this study was to conduct a systematic review to investigate the socio-economic benefits of the poison control center (PCC) and to assess whether telephone counseling at the poison control center affects the frequency of emergency room visits, hospitalization, and length of stay of patients with acute poisoning. Methods: The authors conducted a medical literature search of the PubMed, EMBASE, and Cochrane Library databases. Two reviewers evaluated the abstracts for eligibility, extracted the data, and assessed the study quality using a standardized tool. Key results such as the cost-benefit ratio, hospital stay days, unnecessary emergency room visits or hospitalizations, and reduced hospital charges were extracted from the studies. When meta-analysis was possible, it was performed using RevMan software (RevMan version 5.4). Results: Among 299 non-duplicated studies, 19 were relevant to the study questions. The cost-benefit ratios of PCC showed a wide range from 0.76 to 36 (average 6.8) according to the level of the medical expense of each country and whether the study included intentional poisoning. PCC reduced unnecessary visits to healthcare facilities. PCC consultation shortened the length of hospital stay by 1.82 (95% CI, 1.07-2.57) days. Conclusion: The systematic review and meta-analysis support the hypothesis that the PCC operation is cost-beneficial. However, when implementing the PCC concept in Korea in the future, it is necessary to prepare an institutional framework to ensure a costeffective model.

• Smart Media Journal
• /
• v.9 no.4
• /
• pp.97-101
• /
• 2020

Using passive electric field sensor which operates in non-contact mode, we can measure the electric potential induced from the change of electric charges on a sensor caused by the movement of human body or hands. In this study, we propose a new method, which utilizes PLN induced to the sensor around the moving object, to detect one's hand movement and extract gesture frames from the detected signals. Signals from the EPS sensors include a large amount of power line noise usually existing in the places such as rooms or buildings. Using the fact that the PLN is shielded in part by human access to the sensor, signals caused by motion or hand movement are detected. PLN consists mainly of signals with frequency of 60 Hz and its harmonics. In our proposed method, signals only 120 Hz component in frequency domain are chosen selectively and exclusively utilized for detection of hand movement. We use FFT to measure a spectral-separated frequency signal. The signals obtained from sensors in this way are continued to be compared with the threshold preset in advance. Once motion signals are detected passing throng the threshold, we determine the motion frame based on period between the first threshold passing time and the last one. The motion detection rate of our proposed method was about 90% while the correct frame extraction rate was about 85%. The method like our method, which use PLN signal in order to extract useful data about motion movement from non-contact mode EPS sensors, has been rarely reported or published in recent. This research results can be expected to be useful especially in circumstance of having surrounding PLN.

• The Journal of the Korea Contents Association
• /
• v.22 no.9
• /
• pp.85-94
• /
• 2022

In modern society, environmental and energy problems have caused to replace cars with environment friendly energy. Vehicles with internal combustion engine which use petroleum are one of the factors that influence global pollution due to environment problems such as fine dust and ozone layer destruction. In addition use of energies for automobile making resources to become depleted. To solve this limited oil energy problem by using other energy sources. To the problem using electric energy and green energy as alternative for a solution. Among environment friendly energies this paper studies the possibility of drive service for autonomous vehicles that self-charges using only solar energy and whether they can be used as pollution free and alternative energy for automobiles. Studies was researched based on published literature review, data from ministry of transportation and automobile companies. Also case of electric vehicle and prototype automobile using only solar energy and the theory of near future technologies. Many automakers are using electric cars as alternative energy. Also making efforts to use solar energy as an substitute energy source and as a way to supplement electricity. Results show that there is a potential on operating autonomous vehicle using only solar energy. Furthermore, it will be possible to use automobiles actively, also use and supply solar energy. This paper suggest the possibility of contributing to the future of the automotive industry.

• Composites Research
• /
• v.35 no.6
• /
• pp.394-401
• /
• 2022

Two polymer precursors, polyvinylidene chloride-resin (PVDC-resin) and polyvinylidene fluoride (PVDF), are assembled into the microporous carbon by pyrolysis. Microporous carbon is advantageous as an electrode for supercapacitors that store electric charges through ion adsorption/desorption. The pyrolysis also turns the various heteroatoms of two precursors into functional groups, contributing to the additional charge storage. The analysis of the porous structure and function group during carbonization are important to develop the carbon for energy storage. Here, we analyzed the functional groups of two polymer-derived carbons through X-ray photoelectron spectroscopy. The electrochemical properties of the functional groups were explored in various pH electrolytes. The specific capacitance of two carbons in the acidic electrolyte (1 M H₂SO₄) was improved compared to that in the neutral electrolyte (0.5 M Na₂SO₄) due to the faradaic charge/discharge reaction of the quinone functional group. In particular, the carbon electrode derived from PVDC-resin exhibits a lower capacity than the carbon from PVDF due to the small micropores. In the alkaline electrolyte (6 M KOH), the highest specific capacitance and rate capability were obtained among the three electrolytes for both electrodes based on the facile adsorption of the constituent electrolyte ions (K⁺, OH^-).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.3
• /
• pp.249-254
• /
• 2023

La_0.7-xCe_xSr_0.3MnO₃ specimens were fabricated by a solid state reaction method and structural and electrical properties with variation of Ce⁴⁺ contents were measured. All specimens exhibited a polycrystalline rhombohedral crystal structure, and the (110) peaks were shifted to low angle side with increasing the amount of Ce⁴⁺ contents. As Ce⁴⁺ ions with different ion radii and charges are substituted with La³⁺ ions, electrical properties are thought to be affected by changes in the double exchange interaction between Mn³⁺-Mn⁴⁺ ions due to distortion of the unit lattice, a decrease in oxygen vacancy concentration, and an increase in lattice defects. Resistivity gradually decrease as the amount of Ce⁴⁺ added increased, and negative temperature coefficient of resistance (NTCR) properties were shown in all specimens. In the La_0.5Ce_0.2Sr_0.3MnO₃ specimens, electrical resistivity, TCR and B-value were 31.8 Ω-cm, 0.55%/℃ and 605 K, respectively.

• Analytical Science and Technology
• /
• v.21 no.3
• /
• pp.237-243
• /
• 2008

Nano core shell structures of $TiO_2$ particles coated on surface of ZnO nanoparticles were prepared by the polymerized complex and sol-gel method. The average particle size of ZnO by the polymerized complex method showed 100 nm and the average particle size of $TiO_2$ by the sol-gel method showed below 10 nm. The average particle size of $ZnO@TiO_2$ nano core shell struture represented about 150 nm. The agglomeration between the ZnO particles using the polymerized complex method was highly controlled by the uniform absorption of $TiO_2$ colloid on the spherical ZnO surfaces. The driving force of heterogeneous bonding between ZnO and $TiO_2$ was induced by the Coulomb force. The ZnO and $TiO_2$ particles electrified with + and - charges, respectively, resulted in strong bonding by the difference of iso-electric point (IEP) when they laid neutrality pH area, depending on the heterogeneous surface electron electrified by the different zeta potential on the pH values.

• Journal of the Korean Society for Library and Information Science
• /
• v.57 no.2
• /
• pp.271-291
• /
• 2023

The purpose of this study is to analyze the current status and effects of open access conversion of journals from 7 societies that participated in the "Open Access Publication Declaration Academic Societies in the Field of Library and Information Science", and to identify problems and suggest improvement directions. To this end, the study analyzed the current status based on the elements presented in the "Roadmap for Open Access Publishing Conversion of the Library and Information Science Journals in Korea" and analyzed citation rates. The following problems were identified. First, some journals were not applying CCL or were unable to register it accurately with KJCI, and none of the 7 journals were registered with DOAJ. Second, the newly used journal platforms had not yet registered all previous issues after the conversion. Third, there was a tendency for the article processing charges to be partially increased, and there was also a tendency for editorial staff expenses to increase. Fourth, citation indexes after conversion were lower for both journals compared to the previous 4-5 years. This study proposes that joint publication of journals is necessary to solve practical problems jointly with societies while promoting economies of scale and suggests the need for further development of a roadmap.