JSTS:Journal of Semiconductor Technology and Science
/
v.12
no.3
/
pp.360-369
/
2012
The causes of showing different subthreshold slopes (SS) in programmed and erased states for two different charge trap flash (CTF) memory devices, SONOS type flash memory with gate-all-around (GAA) structure and TANOS type NAND flash memory with planar structure were investigated. To analyze the difference in SSs, TCAD simulation and low-frequency noise (LFN) measurement were fulfilled. The device simulation was performed to compare SSs considering the gate electric field effect to the channel and to check the localized trapped charge distribution effect in nitride layer while the comparison of noise power spectrum was carried out to inspect the generation of interface traps ($N_{IT}$). When each cell in the measured two memory devices is erased, the normalized LFN power is increased by one order of magnitude, which is attributed to the generation of $N_{IT}$ originated by the movement of hydrogen species ($h^*$) from the interface. As a result, the SS is degraded for the GAA SONOS memory device when erased where the $N_{IT}$ generation is a prominent factor. However, the TANOS memory cell is relatively immune to the SS degradation effect induced by the generated $N_{IT}$.
Proceedings of the Korean Vacuum Society Conference
/
2011.08a
/
pp.273-273
/
2011
현재 사용되고 있는 플로팅 게이트를 이용한 플래시 메모리 소자는 비례축소에 의해 발생하는 단 채널 효과, 펀치스루 효과 및 소자간 커플링 현상과 같은 문제로 소자의 크기를 줄이는데 한계가 있다. 이러한 문제를 해결하기 위하여 silicon nitride와 같은 절연체를 전자의 트랩층으로 사용하는 charge trap flash (CTF) 메모리 소자에 대한 연구가 활발히 진행되고 있다. CTF 메모리 소자의 전기적 특성에 대한 연구는 활발히 진행 되었지만, 수치 해석 모델을 사용하여 메모리 소자의 전하수송 메커니즘을 분석한 연구는 매우 적다. 본 연구에서는 수치 해석 모델을 적용하여 개발한 시뮬레이터를 사용하여 CTF 메모리 소자의 프로그램 동작 시 전하수송 메커니즘에 대한 연구를 하였다. 시뮬레이터에 사용된 모델은 연속방정식, 포아송 방정식과 Shockley-Read-Hall 재결합 모델을 수치해석적 방법으로 계산하였다. 또한 CTF 소자 프로그램 동작 시 트랩 층으로 주입되는 전자의 양은 Wentzel-Kramers-Brillouin 근사 법을 이용하여 계산하였다. 트랩 층에 트랩 되었던 전자의 방출 모델은 이온화 과정을 사용하였다. 게이트와 트랩 층 사이의 터널링은 Fowler-Nordheim (FN) tunneling 모델, Direct tunneling 모델, Modified FN tunneling 모델을 적용하였다. FN tunneling 만을 적용했을때 보다 세가지 모델을 적용했을 때가 더 실험치와의 오차가 적었다. 그 이유는 시뮬레이션 결과를 통해 인가된 전계에 의해 Bottom Oxide 층의 에너지 밴드 구조가 변화하여 세가지 tunneling 모델의 구역이 발생하는 것을 확인 할 수 있었다. 계산된 결과의 전류-전압 곡선을 통해 CTF 메모리 소자의 프로그램 동작 특성을 관찰하였다. 트랩 층의 전도대역과 트랩 층 내부에 분포하는 전자의 양을 시간에 따라 계산하여 트랩 밀도가 시간이 지남에 따라 일정 값에 수렴하고 많은 전하가 트랩 될 수록 전하 주입이 줄어듬을 관찰 하였다. 이와 같은 시뮬레이션 결과를 통해 CTF 메모리의 트랩층에서 전하의 이동에 대해 더 많이 이해하여 CTF 소자가 가진 문제점 해결에 도움을 줄 것이다.
Proceedings of the Korean Vacuum Society Conference
/
2011.08a
/
pp.288-288
/
2011
최근 Charge Trap Flash (CTF) Non-Volatile Memory (NVM) 소자가 30 nm node 이하로 보고 되면서, 고집적화 플래시 메모리 소자로 각광 받고 있다. 기존의 CTF NVM 소자의 tunnel layer로 쓰이는 SiO2는 성장의 용이성과 Si 기판과의 계면특성, 낮은 누설전류와 같은 장점을 지니고 있다. 하지만 단일층의 SiO2를 tunnel layer로 사용하는 기존의 Non-Valatile Memory (NVM)는 두께가 5 nm 이하에서 direct tunneling과 Stress Induced Leakage Current (SILC) 등의 효과로 인해 게이트 누설 전류가 증가하여 메모리 보존특성의 감소와 같은 신뢰성 저하에 문제점을 지니고 있다. 이를 극복하기 위한 방안으로, 최근 CTF NVM 소자의 Tunnel Barrier Engineered (TBE) 기술이 많이 접목되고 있는 상황이다. TBE 기술은 SiO2 단일층 대신에 서로 다른 유전율을 가지는 절연막을 적층시킴으로서 전계에 대한 민감도를 높여 메모리 소자의 쓰기/지우기 동작 특성과 보존특성을 동시에 개선하는 방법이다. 또한 터널링 절연막으로 유전률이 큰 High-K 물질을 이용하면 물리적인 두께를 증가시킴으로서 누설 전류를 줄이고, 단위 면적당 gate capacitance값을 늘릴 수 있어 메모리 소자의 동작 특성을 개선할 수 있다. 본 연구에서는 CTF NVM 소자의 trap layer로 쓰이는 HfO2의 두께를 5 nm, blocking layer의 역할을 하는 Al2O3의 두께를 12 nm로 하고, tunnel layer로 Si3N4막 위에 유전율과 Energy BandGap이 유사한 HfAlO와 ZrO2를 적층하여 Program/Erase Speed, Retention, Endurance를 측정을 통해 메모리 소자로서의 특성을 비교 분석하였다.
Park, Goon-Ho;You, Hee-Wook;Oh, Se-Man;Kim, Min-Soo;Jung, Jong-Wan;Lee, Young-Hie;Chung, Hong-Bay;Cho, Won-Ju
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2009.06a
/
pp.415-416
/
2009
The tunnel barrier engineered charge trap flash (TBE-CTF) non-volatile memory using CRESTED tunneling barrier was fabricated by stacking thin $Si_3N_4$ and $SiO_2$ dielectric layers. Moreover, high-k based $HfO_2$ charge trap layer and $Al_2O_3$ blocking layer were used for further improvement of the NVM (non-volatile memory) performances. The programming/erasing speed, endurance and data retention of TBE-CTF memory was evaluated.
Proceedings of the Korean Vacuum Society Conference
/
2012.02a
/
pp.331-331
/
2012
With the NAND Flash scaling down, it becomes more and more difficult to follow Moore's law to continue the scaling due to physical limitations. Recently, three-dimensional (3D) flash memories have introduced as an ideal solution for ultra-high-density data storage. In 3D flash memory, as the process reason, we need to use poly-Si TFTs instead of conventional transistors. So, after combining charge trap flash (CTF) structure and poly-Si TFTs, the emerging device SONOS-TFTs has also suffered from some reliability problem such as hot carrier degradation, charge-trapping-induced parasitic capacitance and resistance which both create interface traps. Charge pumping method is a useful tool to investigate the degradation phenomenon related to interface trap creation. However, the curves for charge pumping current in SONOS TFTs were far from ideal, which previously due to the fabrication process or some unknown traps. It needs an optimization and the important geometrical effect should be eliminated. In spite of its importance, it is still not deeply studied. In our work, base-level sweep model was applied in SONOS TFTs, and the nonideal charge pumping current was optimized by adjusting the gate pulse transition time. As a result, after the optimizing, an improved charge pumping current curve is obtained.
The Charge Trap Flash (CTF) memory device is a replacement candidate for the NAND Flash device. In this study, Pt/$Al_2O_3/La_2O_3/SiO_2$/Si multilayer structures with lanthanum oxide charge trap layers were fabricated for nonvolatile memory device applications. Aluminum oxide films were used as blocking oxides for low power consumption in program/erase operations and reduced charge transports through blocking oxide layers. The thicknesses of $SiO_2$ were from 30 $\AA$ to 50 $\AA$. From the C-V measurement, the largest memory window of 1.3V was obtained in the 40 $\AA$ tunnel oxide specimen, and the 50 $\AA$ tunnel oxide specimen showed the smallest memory window. In the cycling test for reliability, the 30 $\AA$ tunnel oxide sample showed an abrupt memory window reduction due to a high electric field of 9$\sim$10MV/cm through the tunnel oxide while the other samples showed less than a 10% loss of memory window for $10^4$ cycles of program/erase operation. The I-V measurement data of the capacitor structures indicated leakage current values in the order of $10^{-4}A/cm^2$ at 1V. These values are small enough to be used in nonvolatile memory devices, and the sample with tunnel oxide formed at $850^{\circ}C$ showed superior memory characteristics compared to the sample with $750^{\circ}C$ tunnel oxide due to higher concentration of trap sites at the interface region originating from the rough interface.
Park, Goon-Ho;You, Hee-Wook;Oh, Se-Man;Kim, Min-Soo;Jung, Jong-Wan;Lee, Young-Hie;Chung, Hong-Bay;Cho, Won-Ju
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2009.06a
/
pp.97-98
/
2009
Tunneling barrier engineered charge trap flash (TBE-CTF) memory capacitor were fabricated using the tunneling barrier engineering technique. Variable oxide thickness (VARIOT) barrier and CRESTED barrier consisting of thin $SiO_2$ and $Si_3N_4$ dielectrics layers were used as engineered tunneling barrier. The charge trapping characteristic with different metal gates are also investigated. A larger memory window was achieved from the TBE-CTF memory with high workfunction metal gate.
Proceedings of the Korean Vacuum Society Conference
/
2011.08a
/
pp.229-229
/
2011
부유 게이트 Floating gate (FG) 플래시 메모리 소자의 단점을 개선하기 위해 전하 포획 층에 전하를 저장하는 전하 포획 플래시 메모리 Charge trap flash (CTF)소자에 대한 연구가 활발히 진행되고 있다. CTF소자는 FG플래시 메모리 소자에 비해 비례축소가 용이하고 긴 retention time을 가지며, 낮은 구동 전압을 사용하는 장점을 가지고 있다. CTF 소자에서 비례축소에 따라 단채널 효과와 펀치-쓰루 현상이 증가하는 문제점이 있다.본 연구에서는 CTF 단채널 효과와 펀치-쓰루 현상을 감소시키기 위한 방법으로 silicon-on-insulator (SOI) 기판을 사용하였으며 SOI기판에서 절연층의 깊이에 따른 전기적 특성을 고찰하였다. silicon-oxide-nitride-oxide-silicon(SONOS) 구조를 가진 CTF 메모리 소자를 사용하여 절연층의 깊이 변화에 따른 subthreshold swing특성, 쓰기-지우기 동작 특성을 TCAD 시뮬레이션 툴인 Sentaurus를 사용하여 조사하였다. 소스와 드레인의 junction depth는 20 nm 사용하였고, 절연층의 깊이는 5 nm~25 nm까지 변화하면서 절연층의 깊이가 20 nm이하인 fully depletion 소자에 비해, 절연층의 깊이가 25 nm인 소자는 partially depletion으로 인해서 드레인 전류 레벨이 낮아지고 subthreshold swing값이 증가하는 현상이 나타났다. 절연층의 깊이가 너무 얕을 경우, 채널 형성의 어려움으로 인해 subthreshold swing과 드레인 전류 레벨의 전기적성질이 SOI기판을 사용하지 않았을 경우보다 떨어지는 경향을 보였다. 절연층의 깊이가 17.5 nm인 경우, CTF소자의 subthreshold swing과 드레인 전류 레벨이 가장 좋은 특성을 보였다.
Proceedings of the Korean Vacuum Society Conference
/
2010.08a
/
pp.186-186
/
2010
소자의 축소화에 따라 floating gate 형의 flash 메모리 소자는 얇은 게이트 절연막 등의 이유로, 이웃 셀 간의 커플링 및 게이트 누설 전류와 같은 문제점을 지니고 있다. 이러한 문제점을 극복하기 위해 charge trap flash 메모리 (CTF) 소자가 연구되고 있지만, CTF 메모리 소자는 쓰기/지우기 속도와 데이터 보존 성능간의 trade-off 관계와 같은 문제점을 지니고 있다. 최근, 이를 극복하기 위한 방안으로, 다른 유전율을 갖는 유전체들을 적층시킨 터널 절연막을 이용한 Tunnel Barrier Engineered (TBE) 기술이 주목 받고 있다. 따라서, 본 논문에서는 TBE 기술을 적용한 MIS-capacitor를 높은 유전율을 가지는 Al2O3와 HfO2를 이용하여 제작하였다. 이를 위해 먼저 Si 기판 위에 Al2O3 /HfO2 /Al2O3 (AHA)를 Atomic Layer Deposition (ALD) 방법으로 약 2/1/3 nm의 두께를 가지도록 증착 하였고, Aluminum을 150 nm 증착 하여 게이트 전극으로 이용하였다. Capacitance-Voltage와 Current-Voltage 특성을 측정, 분석함으로써, AHA 구조를 가지는 터널 절연막의 전기적인 특성을 확인 하였다. 또한, high-k 물질을 이용한 터널 절연막을 급속 열처리 공정 (Rapid Thermal Annealing-RTA) 과 H2/N2분위기에서 후속열처리 공정 (Post-RTA)을 통하여 전기적인 특성을 개선 시켰다. 적층된 터널 절연막은 열처리를 통해 터널링 전류의 민감도의 향상과 함께 누설전류가 감소됨으로서 우수한 전기적인 특성이 나타남을 확인하였으며, 적층된 터널 절연막 구조와 적절한 열처리를 이용하여 빠른 쓰기/지우기 속도와 전기적인 특성이 향상된 비휘발성 메모리 소자를 기대할 수 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.