• ETRI Journal
• /
• v.46 no.5
• /
• pp.865-877
• /
• 2024

This paper presents a membrane computation error-minimized mixed-mode spiking neural network (SNN) crossbar array. Our approach involves implementing an embedded dummy switch scheme and a mid-node pre-charge scheme to construct a high-precision current-mode synapse. We effectively suppressed charge sharing between membrane capacitors and the parasitic capacitance of synapses that results in membrane computation error. A 400 × 20 SNN crossbar prototype chip is fabricated via a 28-nm FDSOI CMOS process, and 20 MNIST patterns with their sizes reduced to 20 × 20 pixels are successfully recognized under 411 ㎼ of power consumed. Moreover, the peak-to-peak deviation of the normalized output spike count measured from the 21 fabricated SNN prototype chips is within 16.5% from the ideal value, including sample-wise random variations.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.3
• /
• pp.353-359
• /
• 2012

A highly efficient charge pump that minimizes the reverse charge sharing current (in short, reverse current) is proposed. The charge pump employs auxiliary capacitors and diode-connected MOSFET along with an early clock to drive the charge transfer switches; this new method provides better isolation between stages. As a result, the amount of reverse current is reduced greatly and the clock driver can be designed with reduced transition slope. As a proof of the concept, a 1.1V-to-9.8 V charge pump was designed in a $0.35{\mu}m$ 18 V CMOS technology. The proposed architecture shows 1.6 V ~ 3.5 V higher output voltage compared with the previously reported architecture.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.469-471
• /
• 2008

The charge pump affects the performance of PLL. In designing the charge pump, we need to consider various issues such as current mismatch, charge sharing, feedthrough, charge injection, and leakage current. This paper propose the new charge pump circuit which is improved in terms of the current match over the existing high-speed charge pump. The simple method used for reducing current mismatch is the technique that uses a cascode in order to increase the output resistance of the charge pump. However the method limits the output voltage range of the charge pump. So the method is hard to apply as the supply voltage is lowered. Thus this paper proposes a new charge pump circuit using an op amp instead of the cascode. And the new charge pump circuit has an excellent current matching characteristics over a wide output range.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.249-252
• /
• 2003

This paper propose an advanced circuit for fingerprint sensor signal processing. We increased the voltage between ridge and valley by modifying the parasitic capacitance eliminating circuit of sensor plate. The analog to comparator was designed for comparing the sensor signal voltage with the reference signal voltage. We also propose an exective isolation strategy for removing noise and signal coupling of each sensor pixel. The 128$\times$144 pixel fingerprint sensor circuit was designed and simulated, and the layout was performed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.795-797
• /
• 2013

This paper describes a charge sharing capacitive-sensing circuit technique that improves the quality of images captured with fingerprint sensor LSIs. When the finger is dry, the electrical resistance of a finger surface is high. It leads to poor image quality. To capture clear images even when the finger is dry, the modified capacitive detection circuit improves the image quality using an enhancement plate at the finger surface and a voltage control circuit. The test circuit is analyzed on $0.35{\mu}m$ CMOS process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.17-18
• /
• 2000

A low-power source driver for TFT-LCDs has been proposed using the triple charge sharing method that enhances the AC power saving efficiency of the prior charge sharing method. The AC power saving efficiency of the proposed source driver reaches 66.6%. In addition, a novel OP-AMP with low-quiescent current has been developed. The measured quiescent current of the OP-AMP is $5{\mu}A{\sim}7{\mu}A$ at VDD=5V and VSS=0V with load resistance of $2k{\Omega}$ and load capacitance of 300pF.

• Journal of Family Resource Management and Policy Review
• /
• v.16 no.2
• /
• pp.187-210
• /
• 2012

Pumasi and Cooperative Child Care Sharing have had positive results among participants and show possibilities of spreading out to the community in general. However, performance was not proved where it is clarified, and the experience of 23 local Healthy Family Support Centers have that ran the demonstration project were unable to be collected. It is the point of time when the initial backing up is important but the centers do not have the systematic support. Therefore, this research presents an effective management plan through qualitative research involving Pumasi participants and person in charge. The operation strategies by the stage of the project were as follows: First, in the beginning stage, the person in charge establishes the target and vision of the project. Second, when comprising the Pumasi team, it was necessary to consider their characteristics according to the team organization subjects. Third, it is necessary to extend the turn-off time and provide many programs so that the various populations can participate. Fourth, in the advertising step, word of mouth and individual contact needs to be utilized. Fifth, in a medium or small city or an urban-rural complex area, the person in charge should support the participants' Pumasi activities. Sixth, various programs such as a passive and active parent education program and Pumasi education program for the leader needs to be provided for the activation of Pumasi activities. Lastly, a cooperative child care sharing location needs to be constructed by the duality system of the base space and outer space. In this location, the inside play space for the children is essential.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.201-205
• /
• 1998

In this paper, the charge control with the input voltage feed forward is proposed for the input series-output parallel connected converter configuration for high voltage power conversion applications. This control scheme accomplishes the output current sharing for the output-parallel connected modules as well as the input voltage sharing for the input-series connected modules for all operating conditions including the transients. It also offers the robustness for the component value mismatches among the modules.

• Journal of Information Technology Applications and Management
• /
• v.14 no.2
• /
• pp.97-115
• /
• 2007

The present paper investigates the technological and conceptional characteristics of peering and transit in internet interconnection. Especially, the market with two ISP competing for customers is modeled and the outcome with peering is compared with transit. This paper also analyze the congestion effects on retail price and network capacity. When there is congestion effects occurring from network sharing, the retail price is increased and the fixed fee is decreased with the degree of congestion. Finally, the optimal access charge assuring the socially optimal retail price and network capacity is derived.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.1
• /
• pp.133-146
• /
• 1999

The charge operation of an ice storage system has been analyzed in this paper. The thermal characteristics of major components of the ice storage system. i.e., the refrigerator and the ice storage tank are evaluated from performance tests on an existing ice storage system. Based on the measured data for thermal characteristics, a simulation is carried out for the charge operation and the effect of the refrigerator size on the system performance is investigated. The results indicate that the larger the refrigerator size for a given storage capacity, the lower the inlet temperature of the ice storage tank so that the lower the efficiency of charge operation. It is also found that there exists an optimal size of the refrigerator with which the ice storage at the end of the charge operation is maximized, but the complete charge is not possible even with the optimally sized refrigerator. This leads to the result that the design capacity of the storage tank should be larger than the required amount of cold energy for the daytime cooling considering the practically chargeable amount of cold energy during the nighttime. Where the cooling load sharing of the storage is 40%, the nominal capacity of an ice storage tank needs to be larger than the required storage amount by 30%.