• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.34 no.9
• /
• pp.341-348
• /
• 1985

This paper deals with a surface charge simulation method of calculating three-dimensional electric fields and capacitance. The principle is to divide the electrode surface into rectangular or triangular elements of which charge density is the linear function of the electrode coordinate and to formulate a linear equation for the coefficients of charge density function and to determine those coefficients by boundary conditions. It has been shown that the method can give satisfactory results for thin rectangular plates where the other methods is difficult to be applied.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.12
• /
• pp.820-824
• /
• 2008

Electret filter media are used in general ventilation filters, disposable respirators, vehicle cabin filters, vacuum cleaners and room air cleaners. There are basic mechanisms of interception, inertial impaction, diffusion, gravitational settling, electrostatic attraction by which an aerosol particle can be deposited onto a fiber in a filter. The ability of fine particle removal strongly depends on the electrostatic forces between particles and polarized fibers. Thus, the stability of the fiber polarization is a major factor in the reliability of electret filters. In this study, the electret filter is made by electrospinning process using Polystyrene which is dissolved by 5 : 5 of Tetrahydrofuran (THF) and Dimethylformamide (DMF). Also the electrical properties and the filtration performances of electrospun filter media are Quantitatively investigated. Electrical properties of electrospun filters have been studied on surface charge potential and surface charge density. Also the filtration performance of the electret filters are evaluated on collection efficiency. The surface charge potential and the surface charge density of electrospun PS filters are increased with increasing applied voltage and saturated at 30 kV of applied voltage. Also collection efficiency of electro spun filters is increased with increasing surface charge potential and surface charge density. But the surface charge potential is decreased by natural decay and it causes deterioration of particle collection efficiency.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.290-292
• /
• 1994

This paper presents a methodology for the electric field analysis of substation. For the electric field analysis of substation, the electrodes(substation busbars) must be represented by finite line with nonlinear charge density. In the case of dividing finite line into uniform segments, a large number of variables have to be used to obtain the accuracy within a desired tolerance. To deal with the problem, nonuniform charge arrangement modeling method is suggested. To reduce potential calculation errors, the linear charge density function is considered particularly for the segment charge model ling. If the charge arrangement is improper, the accuracy not improved regardless of increment in the number of segments. This paper proposes an optimal charge arrangement method through potential error analysis. And, the optimal charge arrangement function is formulated by a lot of simulation results.

• Journal of Astronomy and Space Sciences
• /
• v.21 no.3
• /
• pp.201-208
• /
• 2004

In this paper we have examined the effect of dust charge density on nonlinear ion acoustic solitary wave which propagates obliquely with respect to the external magnetic field in a dusty plasma. For the dusty charge density below a critical value, the Sagdeev potential $\Psi1(n)$ has a singular point in the region n < 1, where n is the ion number density divided by its equilibrium number density. If there exists a dust charge density over the critical value, the Sagdeev potential becomes a finite function in the region n < 1, which means that there may exist the rarefactive ion acoustic solitary wave. By expanding the Sagdeev potential in the small amplitude limit up to on4 near n=1, we find the solution of ion acoustic solitary wave. Therefore we suggest that the dust charge density plays an important role in generating the rarefactive solitary wave.

• Journal of the Korean Electrochemical Society
• /
• v.1 no.1
• /
• pp.8-13
• /
• 1998

This work presents the way how to evaluate the degree of reversibility of the discharging process undergone by the nickel hydroxide film cathodically deposited on pure nickel as a positive electrode for electrochemical capacitor using the combined cyclic voltammetry and potential drop method, supplemented by galvanostatic discharge and open-circuit potential transient methods. The time interval necessary just to establish the current reversal of anodic to cathodic direction from the moment just after applying the potential inversion of anodic to cathodic direction, was obtained on cyclic voltammogram. The cathodic charge density passed upon dropping the applied potential, was calculated on potentiostatic current density-time curve. Both the time interval and the cathodic charge density in magnitude can be regarded as being measures of the degree of reversibility of the discharging process undergone by the positive active material for supercapacitor, i.e. , the longer the time interval is, the lower is the degree of reversibility and the greater the cathodic charge density is, the higher is the degree of reversibility. From the applied potential dependences of the time interval and cathodic charge density, discharge at $0.42 V_{SCE}$ was determined to be the most reversible.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.86-89
• /
• 2000

The detection technique both the polarization and the mobile charge density at the same time in ferroelectric films on Si using TVS method have been proposed. This method yields a polarizable and an ionic displacement current peaks whose areas are proportional to the total polarization reversal charge and the total moble ionic space charge, respectively. The calculated polarization and the mobile charge density were 0.42 [$\mu$C/$\textrm{cm}^2$] and 5.5$\times$10$^{11}$ (ions/$\textrm{cm}^2$) in the SBT film of MFIS structure measured at 25$0^{\circ}C$, and 1.4 [$\mu$C/$\textrm{cm}^2$] in the LiNbO$_3$ film of MFS structure measured at 30$0^{\circ}C$, respectively.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.377-379
• /
• 1989

Very thin gate oxide(100-300A) MOS capacitor has been fabricated. The effect of series resistance must be calculated and the exact metal-semiconductor work function difference should be obtained to get the fixed oxide charge density exisiting in oxide. Dilute oxidation make sagy to control oxide thickness and reduce fixed oxide charge density. In case of dilute oxidation, fixed oxide charge density depends on oxidation time. If oxide is very thin, the annealing effect is ignored.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.186.1-186.1
• /
• 2014

Graphene, which is a 2-dimensional carbon material, has been attracting much interest due to its unique properties and potential applications. So far, many interesting experimental and theoretical works have been done concerning the electronic properties of graphene on various substrates. Especially, there are many experimental reports about doping in graphene which is caused by interaction between graphene and its supporting substrates. Here, we report the study of charge transfer between graphene and oxide substrates using density functional theory (DFT) calculations. In this study, we have investigated the charge transfer related with graphene considering various oxide substrates such as SiO2(0001) and MgO(111). Details in charge transfer between graphene and oxides are analyzed in terms of charge density difference, band structure and work function.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.3
• /
• pp.107-111
• /
• 2015

Our work is based on the development of a numerical model to develop a methodology for predicting the aging and breakdown in insulation due to the dynamics of space charge packets. The model of bipolar charge transports is proposed to simulate space charge dynamic for high DC voltage in law-density polyethylene (LDPE), taking into account the trapping and detrapping of recombination phenomena, this model has been developed and experimentally validation. Theoretical formulation of the physical problem is based on the Poisson, the continuity and the transport equations as well as on the appropriate models for injection. Numerical results provide temporal and local distributions of the electric field, the space charge density for the different kinds of charges, conduction and displacement current densities, and the external current.

• Journal of the Korean Ceramic Society
• /
• v.20 no.3
• /
• pp.205-210
• /
• 1983

The determination of charge density and charge distribution in montmorillonite are discussed. The method is based on cation exchange of the inorganic interlayer cations against decylammonium ion and molecular intercalation of n-alcanol. The results obtained from Yougil-bentonite show that charge density of 0.37 per unit formula and cation exchange capacity of 102.5 meq/100g.