• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.71-71
• /
• 2011

Dye-sensitized solar cells (DSCs) have drawn great academic attention due to their potential as low-cost renewable energy sources. DSCs contain a nanostructured TiO2 photoanode, which is a key-component for high conversion efficiency. Particularly, one-dimensional (1-D) nanostructured photoanodes can enhance the electron transport for the efficient collection to the conducting substrate in competition with the recombination processes. This is because photoelectron colletion is determined by trapping/detrapping events along the site of the electron traps (defects, surface states, grain boundaries, and self-trapping). Therefore, 1-D nanostructured photoanodes are advantageous for the fast electron transport due to their desirable features of greatly reduced intercrystalline contacts with specified directionality. In particular, anodic TiO2 nanotube (NT) electrodes recently have been intensively explored owing to their ideal structure for application in DSCs. Besides the enhanced electron transport properties resulted from the 1-D structure, highly ordered and vertically oriented nanostructure of anodic TiO2 NT can contribute additional merits, such as enhanced electrolyte diffusion, better interfacial contact with viscous electrolytes. First, to confirm the advantages of 1-D nanostructured material for the photoelectron collection, we compared the electron transport and charge recombination characteristics between nanoparticle (NP)- and nanorod (NR)-based photoanodes in DSCs by the stepped light-induced transient measurements of photocurrent and voltage (SLIM-PCV). We confirmed that the electron lifetime of the NR-based photoanode was much longer than that of the NP-based photoanode. In addition, highly ordered and vertically oriented TiO2 NT photoanodes were prepared by electrochemical anodization method. We compared the photovoltaic properties of DSCs utilizing TiO2 NT photoanodes prepared by one-step anodization and two-step anodization. And, to reduce the charge recombination rate, energy barrier layer (ZnO, Al2O3)-coated TiO2 NTs also applied in DSC. Furthermore, we applied the TiO2 NT photoanode in DSCs using a viscous electrolyte, i.e., cobalt bipyridyl redox electrolyte, and confirmed that the pore structure of NT array can enhance the performances of this viscous electrolyte.

• Journal of the Korean Society of Radiology
• /
• v.9 no.7
• /
• pp.439-443
• /
• 2015

An electrical signals of a conventional radiation medical imaging sensor are obtained by charge integration method. In this study, the polycrystalline cadmium telluride(p-CdTe) film was fabricated by a thermal evaporation method for the photon counting sensor development with excellent resolution in low exposure dose. From the fabricated p-CdTe sensor, the physical properties(SEM, XRD) and the electrical properties(leakage current, x-ray sensitivity, SNR) were evaluated. As a result, the leakage current of below $5nA/cm^2$ and $7{\mu}C/cm^2-R$ of the X-ray sensitivity were showed in below $1V/{\mu}m$. In addition, the signal to noise ratio showed the values of above 5000 at operating voltage.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.5
• /
• pp.487-492
• /
• 2010

In this study, our system that the volume of collected human waste in the septic tank truck is measured accurately and the fee of disposing human waste can be calculated by using measured results has been developed. The level sensor and its circuits which can measure the height of the tank, the hand-held system that can be used by workers easily and simply with micro-controller have been developed. Also, this system has been built in the receipt printing function to charge for disposal fee. Even when working on a sloping field, this system can measure the accurate collected volume of human waste in the tank using the X-Y axis angle sensor. The results of this study expect that the popular complaints that generated from human waste can be reduced, the exportation possibility of our specialized systems can acquire foreign currency.

• Journal of Korea Society of Waste Management
• /
• v.35 no.8
• /
• pp.785-798
• /
• 2018

Since the Framework Act on Resource Circulation was enacted in 2018, the government should establish a National Resource Circulation Master Plan every 10 years, which defines mid- to long-term policy goals and directions on the efficient use of resources, prevention of waste generation and recycling of waste. In addition, we must set mid- to long-term and stepwise targets for the final disposal rate, recycling rate (based on sorted recyclable materials and recycled products), and energy recovery rate of wastes, and relevant measures should be taken to achieve these targets. However, the current industrial waste (IW) statistics have limitations in setting these targets because the final disposal rate and recycling rate are calculated as the ratio of the recycling facility input to the IW generation. In this study, the material flow from the collection stage to the final disposal of industrial waste was analyzed based on the generation of 2016, and the actual recycling amount, actual incineration amount, final disposal amount and their rates were calculated. The effect on the recycling, incineration and final disposal rates was examined by changing the treatment method of nonhazardous wastes from the factory and construction and demolition wastes, which were put in landfills in 2016. In addition, the variation of the waste treatment charge was investigated according to the change of treatment methods. The results of this study are expected to be effectively used to establish the National Resource Circulation Master Plan and industrial waste management policy in the future in South Korea.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.28 no.4
• /
• pp.433-443
• /
• 2022

Purpose: This qualitative study was to understand the awareness of epidemiological investigation tasks for nurses who were in charge of coronavirus disease 2019 (COVID-19) epidemiological investigations. Methods: Before data collection, written consent was obtained from 13 participants, and the data were then collected from September 1 to December 31, 2021. Individual interviews were conducted and recorded by video interview using Zoom, and data were transcribed verbatim. Four themes were derived by using the qualitative thematic analysis method. Results: The participants perceived that epidemiological investigations were burdensome but that the field work was important, and that expertise and collaboration were required. The participants started work without preparation due to the explosive increase in the number of confirmed COVID-19 cases, and they recognized work conflicts, unstable employment, and exhaustion as obstacles to their work performance. On the other hand, the participants took pride in contributing to the national epidemiological investigation and control and felt a sense of responsibility as nursing professionals. Finally, participants mentioned that the training of infectious disease practitioner was important for work improvement. Conclusion: Further research is needed on the development of standardized manuals for the training of nursing personnel as infectious disease specialists through the job analysis of epidemiological investigators.

• Journal of Navigation and Port Research
• /
• v.28 no.10 s.96
• /
• pp.881-889
• /
• 2004

Using the ETC Service, it is now possible to charge a vehicle for driving pass a specific toll booth electronically, without the vehicle even having to slow down. The smart card and card reader used to collect tolls electronically have a serious problem which it dose not have a standard for the ETC system. In this paper, we suggest the ETC system using mobile phone to collect tolls efficiently instead of existing system which is consist of a Interface Module to connect between a mobile phone and OEE, a mobile phone to send the information of tollgate fees and OEE to communication with RSE of roadway in the vehicle. This primary focus of this system is the IM functions and protocol to assist of the existing mobile phone and OBE.

• Journal of Environmental Policy
• /
• v.14 no.1
• /
• pp.135-158
• /
• 2015

An efficient management system of mercury-containing waste was designed by reviewing the management and treatment of spent fluorescent lamp in Korea and foreign countries. According to Waste Management Act in Korea, mercury-containing wastes from households are classified as municipal solid wastes even though mercury-containing wastes pose hazardous risks. In general, hence, mercury-containing wastes from households are not being managed properly because those wastes from households were not classified as specific wastes (or hazardous wastes). Some mercury-containing wastes are managed as a mandatory target item in waste charge system and Extended Producer Responsibility (EPR) system under Act on Promotion for Saving and Recycling of Resources. An efficient management plan of mercury-containing wastes can be derived with an improved collection system, designating disposal sites and advanced treatment facilities for spent fluorescent lamps. Finally, the role of each agent involved from collection to disposal of mercury-containing wastes was suggested to establish the efficient management system for mercury-containing waste.

• Progress in Medical Physics
• /
• v.7 no.2
• /
• pp.29-40
• /
• 1996

We had designed and made the cylindrical ionization chamber which operated above 5 mR/h. Using commercial electrometer, we investigated the characterictic of charge collection in the ion chamber. The active volume was 190.4㎤ and overall length and diameter in the chamber was 15.5cm, 5.22cm, respectively. The chamber had three electrodes(inner, central, wall electrode). And background current was 8.39${\times}$10$\^$-14/${\pm}$1.5${\times}$10$\^$-15/A to arrange the electrodes which were coaxial in chamber axis. The collection efficiency of chamber for Cs$\^$137/ was 99.7％ when the opreating voltage was applied 400V. Comparing with the commertial dosimetry system, the exposure calibration constant was 4.531${\times}$19$\^$7/R/C. By normalizing to CS$\_$137/ the relative energy response of the chamber was 1.30 for Am$\_$24/, 1.05 for C0$\_$60/, respectively. When the irrarition tranversed to the chamber axis, the isotropic effect of the chamber was not considerable.

• Journal of Information Management
• /
• v.39 no.4
• /
• pp.67-96
• /
• 2008

The open access repository means the knowledge information repository for the producer and the user to share in order for all users of the world to freely access the information free of charge with no legal, economic and technological barrier. This study analyzes and compares the functions offered by each repository by classifying the repository into the organizational repository (dCollection, DSpace@MIT) and the thematic repository (arXiv, PubMed Central) and evaluates the user-centered usability based on the analyzed data. This study at the current times, so called as the Web 2.0 era in which the free access and sharing of the information is important, can be said to have the meaning that the result from the usability evaluation on the open access repository will be used as the fundamental data for developing the future repository.

• The Journal of Fisheries Business Administration
• /
• v.54 no.3
• /
• pp.69-92
• /
• 2023

The 'Japanese Useful Fisheries Classification Table', published in advance before the publication of the "Useful Fisheries of Japan", is the first data to classify and introduce fisheries animals and plants in a single table. Therefore, it had received public attention immediately. However, The academy of animal studies at that time quickly pointed out that this classification table was a mixture of traditional and modern classifications, and that there were too many errors. However, Yoshio Tanaka, who was in charge of revising Yamamoto Arikatana, that wrote the classification table, was not an adherent of traditional taxonomy, nor was he ignorant of modern taxonomy. Nevertheless, the classification table, which was quite different from the well-known zoological classification at that time, was prepared. For example, the top classifications of marine organism are not at the same level, but rather a mixture of phylum and class, while the water insect contains several phylums, including Arthropoda, Echinodermata, Mollusca, and Coelenterata. As such, the method of classification of animals in the classification table was hard to understand in the zoological academy at that time. The reason for this unusual taxonomy was that the classification table showed classification of useful fisheries products, not intended to convey academic classification. In other words, it is not for the purpose of academic classification of all fishery products, but for the purpose of presenting standards that can be easily understood by those engaged in the collection, manufacture, and aquaculture of fishery products. This principle of 'Useful Fisheries of Japan' is also ascertained in the "Fishing Methods of Japan" and "Fishery Products of Japan". Regarding the collection and processing of marine products, it could have shown how to catch whales, which are mammals, and how to dismantle whales and obtain oil and meat, according to academic classifications. However, the first appearances in the book include dried squid, abalone, shark fins, and sea cucumbers. In other words, the most important fishery products at that time are presented first. The contents of the classification table, which is considered somewhat bizarre, show where the purpose to compile Useful Fisheries of Japan.