• 제목/요약/키워드: Channel Orientation

검색결과 86건 처리시간 0.025초

경안천의 하천복원 사업 전‧후 저서성 대형무척추동물 군집구조 비교 분석 (Comparative Analysis of Benthic Macroinvertebrate Communities Before and After the Restoration Project in the Kyoungan Stream)

  • 김필재;김진영;손세환;원두희;공동수
    • 한국물환경학회지
    • /
    • 제32권1호
    • /
    • pp.15-22
    • /
    • 2016
  • This study aims to analyze the changes in the benthic macroinvertebrate community before and after a restoration project in a eutrophic stream. Species diversity and species richness increased at the points where the channel changed from standing water to running water. However, species diversity and richness decreased at the points where only riparian restoration was implemented, and the concentration of suspended solids increased, while biochemical oxygen demand and total phosphorus decreased and the concentration of dissolved oxygen increased. In such reaches, functional feeding groups went from collector-filterers to collector-gatherers, and habitat orientation groups changed from clingers to burrowers.

Electro-mechanical Analyses of Thin Film Transistors for Flexible Displays

  • Saran, Neerja;Roh, Nam-Seok;Kim, Sang-Il;Lee, Woo-Jae;Kim, Jong-Seong;Hwang, Tae-Hyung;Hong, Seok-Joon;Kim, Myeong-Hee;Lim, Soon-Kwon;Souk, Jun-Hyung
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2008년도 International Meeting on Information Display
    • /
    • pp.670-673
    • /
    • 2008
  • Good mechanical properties of thin-film transistors on plastic substrates are an essential parameter in the development of robust flexible displays. In this paper, a careful investigation is carried out on TFT backplane on plastic substrates under cyclic bending conditions. Bending modes of tensile and compressive as well as parallel and perpendicular orientation-dependent bending of channel have been analyzed carefully. This analysis will be helpful in knowing the electro-mechanical performance boundaries of the TFT devices so as to determine the bending limitations of our flexible displays.

  • PDF

속도의존성 결정소성 모델 기반의 유한요소해석을 통한 BCC 금속의 변형 집합조직 예측 (Prediction of Deformation Texture in BCC Metals based on Rate-dependent Crystal Plasticity Finite Element Analysis)

  • 김동규;김재민;박원웅;임용택;이용신
    • 소성∙가공
    • /
    • 제23권4호
    • /
    • pp.231-237
    • /
    • 2014
  • In the current study, a rate-dependent crystal plasticity finite element method (CPFEM) was used to simulate flow stress behavior and texture evolution of a body-centered cubic (BCC) crystalline material during plastic deformation at room temperature. To account for crystallographic slip and rotation, a rate-dependent crystal constitutive law with a hardening model was incorporated into an in-house finite element program, CAMPform3D. Microstructural heterogeneity and anisotropy were handled by assigning a crystallographic orientation to each integration point of the element and determining the stiffness matrix of the individual crystal. Uniaxial tensile tests of single crystals with different crystallographic orientations were simulated to determine the material parameters in the hardening model. The texture evolution during four different deformation modes - uniaxial tension, uniaxial compression, channel die compression, and simple shear deformation - was investigated based on the comparison with experimental data available in the literature.

Re-conceptualization of Business Model for Marketing Nowadays: Theory and Implications

  • FIRMAN, Ahmad;PUTRA, Aditya Halim Perdana Kusuma;MUSTAPA, Zainuddin;ILYAS, Gunawan Bata;KARIM, Kasnaeny
    • The Journal of Asian Finance, Economics and Business
    • /
    • 제7권7호
    • /
    • pp.279-291
    • /
    • 2020
  • This study aims to develop the concept of innovation models with the marketing channel construct approach, marketing innovation, product segmentation, and customer insight; as well as improvements to the theory of resource-based combined with the method of service-dominant logic. This study approach is based on quantitative descriptive conducted with three stages of testing scenarios. The first test is the mapping of the innovation model construct through testing the validity and reliability with the moderation of customer orientation variables. The second scenario examines the relationship of influence between the independent variables on the dependent variable of 29 hypothetical analysis equation modeling. The unit of analysis was conducted on 497 SMEs involved in the food and beverage sectors, with the criteria being SMEs must have a rating of 4-5 points on the Go-Food applications software. The results shown that: 1) the construct used to develop an innovative model both directly and via moderation is positive and significant; 2) Through a complicated relationship that involves all components of the variable, it outlines a positive and significant effect except for the path of analysis (μ5). The theoretical and managerial implications state that the service-dominant logic approach and resource-based view theory have extreme reliability and interrelations.

CCSS 변형된 AA 3004 판재의 집합조직과 미세조직 (Texture and Microstructure in AA3004 after Continuous Confined Strip Shearing)

  • 김훈동;정영훈;황병복;최호준;허무영
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2002년도 춘계학술대회 논문집
    • /
    • pp.181-183
    • /
    • 2002
  • A new deformation process termed "continuouis confined sup shearing" (CCSS) has been developed for shear deformation of metallic sheets. The tools of CCSS were designed to provide a constant shear deformation of the order of 0.5 per pass while preserving the original sheet shape. In order to clarify the evolution of texture and microstructure during CCSS, strips of the aluminum alloy AA3004 were deformed by CCSS in up to three passes. FEM results indicated that CCSS provides a quite uniform shear deformation at thickness layers close to the strip center, although the deformation is not homogeneous in the die channel, in particular at the surface layers. The rolling texture of the initial sheet decreased during CCSS, and preferred orientations along two fibers developed. However, with an increasing number of CCSS passes the deformation texture did not develop futher. The evolution of annealing textures depended on the number of CCSS passes. A strong {112}<110> component in the deformation texture led to the formation of a strong {111}<112) orientation in the annealing texture. Observations by TEM and EBSD revealed the formation of very fine grains of ∼1.0$\mu\textrm{m}$ after CCSS.

  • PDF

편광상이 고리 기반 2차 광섬유 유연 빗살 필터의 투과 스펙트럼 특성 분석 (Analysis of Transmission Spectrum Characteristics of Second-Order Fiber Flexible Comb Filter Based on Polarization-Diversity Loop)

  • 박경수;이용욱
    • 조명전기설비학회논문지
    • /
    • 제29권12호
    • /
    • pp.1-7
    • /
    • 2015
  • In this paper, we propose a second-order fiber flexible comb filter based on a polarization-diversity loop(PDL). The proposed filter consists of a polarization beam splitter, four half-wave plates(HWPs), and three high birefringence fiber(HBF) segments. In the previous Solc-type second-order filter based on the PDL, HBF segments were fusion-spliced with a fixed angle offset between their principal axes with each other. But, the proposed filter implemented by inserting two HWPs between three HBF segments has a great flexibility in adjusting relative angular difference between the principal axes of two adjacent HBF segments. Owing to this flexibility, second-order transmission spectra, which had a channel spacing of ~0.8nm, could be interleaved by controlling the orientation angles of four HWPs. The output transmission spectra of the proposed filter were theoretically analyzed and experimentally verified.

Fabrication of sub-micron sized organic field effect transistors

  • 박성찬;허정환;김규태;하정숙
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2009년도 제38회 동계학술대회 초록집
    • /
    • pp.84-84
    • /
    • 2010
  • In this study, we report on the novel lithographic patterning method to fabricate organic-semiconductor devices based on photo and e-beam lithography with well-known silicon technology. The method is applied to fabricate pentacene-based organic field effect transistors. Owing to their solubility, sub-micron sized patterning of P3HT and PEDOT has been well established via micromolding in capillaries (MIMIC) and inkjet printing techniques. Since the thermally deposited pentacene cannot be dissolved in solvents, other approach was done to fabricate pentacene FETs with a very short channel length (~30nm), or in-plane orientation of pentacene molecules by using nanometer-scale periodic groove patterns as an alignment layer for high-performance pentacene devices. Here, we introduce the atomic layer deposition of $Al_2O_3$ film on pentacene as a passivation layer. $Al_2O_3$ passivation layer on OTFTs has some advantages in preventing the penetration of water and oxygen and obtaining the long-term stability of electrical properties. AZ5214 and ma N-2402 were used as a photo and e-beam resist, respectively. A few micrometer sized lithography patterns were transferred by wet and dry etching processes. Finally, we fabricated sub-micron sized pentacene FETs and measured their electrical characteristics.

  • PDF

Reaction Times to Predictable Visual Patterns Reflect Neural Responses in Early Visual Cortex

  • Joo, Sung Jun
    • 감성과학
    • /
    • 제24권2호
    • /
    • pp.57-64
    • /
    • 2021
  • It has long been speculated that the visual system should use a coding strategy that takes advantage of statistical redundancies in images. But how such a coding strategy should manifest in neural responses has been less clear. Low-level image structure related to the power spectrum of natural images appears to be captured by a hard-wired efficient code in the retina of the fly and precortical structures like the LGN of cats that maximizes information content through the limited capacity channel of the optic nerve. But visual images are typically filled with higher-order structure beyond that captured by the power spectrum and visual cortex is not constrained by the same capacity limits as the optic nerve. Whether and how visual cortex can flexibly code for higher order redundancies is unknown. Here we show using psychophysical techniques that the neural response in early human visual cortex may be modulated by orientation redundancies in images such that a visual feature that is contained within a predictive pattern results in slower reaction times than a feature that deviates from a pattern, suggesting lower neural responses to predictable stimuli in the visual cortex. Our results point to a neural response in early visual cortex that is sensitive to global patterns and redundancies in visual images and is in marked contrast to standard models of cortical visual processing.

Online Food Delivery App Distribution and Determinants of Jakarta's Gen Z Spending Habits

  • INDRIYARTI, Eko Retno;CHRISTIAN, Michael;YULITA, Henilia;RUMINDA, Marthaleina;SUNARNO, Sunarno;WIBOWO, Suryo
    • 유통과학연구
    • /
    • 제20권7호
    • /
    • pp.73-86
    • /
    • 2022
  • Purpose: Considering the COVID-19 pandemic and the increasing number of online food delivery applications (OFDA), this study aims to assess the distribution of the presence of Indonesian OFDA and to measure the factors that influence the spending habits of OFDA users. Research design, data and methodology: Two hundred and nine OFDA users from Jakarta's Generation Z were surveyed via a questionnaire. The data were analyzed using Structural Equation Modeling and SMART PLS 3.0. Results: OFDAs were introduced into Indonesia in the recent past with varying degrees of popularity determined by the number of downloads. Users' intention to use was not determined by the speed of the introduction of an OFDA. This study also reveals that previous experience of the service, the orientation of time and price savings had a significant effect on spending habits. A moderating role of the saving variable on time and price was not demonstrated. Conclusions: The results of the study suggest that, in COVID-19 pandemic conditions, the spending habits of Generation Z are not based on impulse, thrift, or extravagance. The pandemic shaped specific motivations in spending habits, namely prioritizing need. This study has limitations, including the small sample size and the use of internal variables.

다차원척도법을 이용한 중소수출기업의 수출애로요인과 촉진요인 분석 (An analysis of export deterring and facilitating factors with multidimensional scaling in Korean small and medium sized export companies)

  • 황선대;이기웅
    • 통상정보연구
    • /
    • 제15권3호
    • /
    • pp.135-153
    • /
    • 2013
  • 본 연구에서는 중소수출기업의 수출애로요인과 촉진요인을 파악한 후 상호 연관성을 전체적으로 분석하고자 하였다. 문헌조사에 근거하여 수출 애로요인으로는 수출경험, 시장정보, 브랜드 이미지, 제조기술, 유통망확보 등 9개의 요인이, 수출촉진요인으로는 경영자의 해외시장 지향성 등 4가지 요인을 제시하였다. 다차원척도법을 사용하여 수출애로요인간 복잡한 연관성을 2차원의 평면에 단순화시키고 회귀분석을 통하여 촉진요인의 애로요인에 대한 효율성을 분석하였다. 정부지원정책은 시장정보와 제조기술의 부족을 해소하는데 큰 효과를 발휘하는 반면 브랜드이미지, 전자무역인프라, 운영자금의 부족에서 겪는 어려움은 기업의 내부 역량으로 완화될 수 있음을 보여주고 있다.

  • PDF